New Switches Products

Slide Switch suits PCB configuration applications.

RoHS compliant 1K2 changeover slide switch occupies 10 x 2.5 mm board space with height of 4.5 mm, excluding actuator. SPST switch is offered with standard or raised actuator, in straight or 90Ã-

Vibration Switch provides proactive machinery protection.

Mounted to any location on rotating or reciprocating equipment, Hardy Vibration Switch actuates alarm or shutdown if excessive vibration levels are reached. All sensing and electronic components, including LED alarm display, come in stand-alone switch box. Along with integral relay that provides failsafe operation with NO and NC contacts, self-contained monitoring system features optional 4-20 mA...

Interface Converter handles 2-way RS232/RS485 conversion.

Bi-directional Model 4010 enables communication between devices with RS232 and RS485 interfaces. It handles RS232 to RS485 as well as RS485 to RS232 data signal conversion. All signals of both types of interfaces are regenerated, maintaining accurate adherence to interface specifications. Wall mount power supply is included. In front panel, 2 LEDs display transmit data signal activity for each...

Databus System monitors status of motors and lighting.

Suited for crane, vehicle, and utility applications, self-contained MiniBus(TM) digital multiplex system is specifically designed for switching high-amp dc motors and operation of lighting on vehicles. It minimizes wiring as units are linked by single electrical cable. If needed, multiple loads can be added to system.

A Guide to Preventive Maintenance & Refurbishment of Your Tablet Press

Check out this guide to keeping your tablet press in good working order.

Industrial Ethernet Switch operates from -40 to 85-

With 10-30 Vdc power input, 5-port 10/100 Mbps Model ADAM-6520I supports full/half duplex flow control, MDI/MDI-X auto crossover, 4,000 Vdc Ethernet ESD protection, and flexible mounting options. It provides broadcast storm protection and 3,000 Vdc surge protection for power line as well as embedded switch controller that supports auto-negotiation.

Snap-Action Switches are RoHS-compliant.

Rated for 100,000 cycles under load and 1,000,000 mechanical cycles, microminiature MDB Series features silver contacts and is available with pin, hinged lever, roller lever, and simulated roller lever actuators. Contact configuration options include NO, NC, and change-over, while terminal options include PCB, right angle, and solder terminal configurations. Switches carry 3 A @ 125 Vac rating...

SPDT Switch suits applications with fast settling times.

Fabricated on 0.5-micron gate-length GaAs pHEMT process, MASWSS0192 features nominal settled on resistance of 2.5 ohm with less than 0.15 ohm change after 15 Ã-µs. This 0.5-3.0 GHz SPDT 3.0 V switch has typ insertion loss of 0.18 dB, isolation of 24 dB, and full passivation. In addition to RoHS-compliant, lead-free SC-70 (SOT-363) packaging, switch features power handling capabilities with...

Fiber Optic Blade is designed for IntellaPatch matrix switches.

Featuring 16 ports, 100/1000 Mb/s Ethernet Fiber Optic blade supports layer-1 switching of fiber-based Fast Ethernet and Gigabit Ethernet traffic. Any 100 or 1000 Mb/s fiber or copper Ethernet signal can be automatically converted to copper or fiber Ethernet, respectively, or between single-mode and multimode, and then switched to any other port for output. Blade enables interconnection of...

Ethernet Switch/Router provides ten 1 GbE ports.

Offered in air-cooled and conduction-cooled configurations, SCP/DCP-681 SwitchBlade GbE Switch/Router provides up to 10 wire-speed 10/100/1000 Mbps Ethernet interfaces in single 3U cPCI slot. Fully managed, intelligent multilayer card supports set of CLI, telnet, web, and SNMP management interfaces that can be used to configure protocols and parameters. With integrated address tables and buffer...

HDMI Switch offers update path for existing display products.

Model FSHDMI04 high-definition multi-media interface switch allows designers to add second HDMI input to circuitry in existing display applications without need for redesign. It supports data rates up to 1.65 Gbps per channel for HDMI and DVI connections. With ESD rating of 8 kV for all pins, switch protects against system damage while eliminating need for additional ESD-protection ICs. It offers...

Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier

Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.