Gigabit and PoE Switches suit surveillance applications.

Gigabit and PoE Switches suit surveillance applications.

Elinx(TM) unmanaged (EIR400 series) and managed (EIR600 series) Gigabit Ethernet switches, capable of speeds to 1,000 Mbps, boost throughput in high-bandwidth networks. Also available, Elinx Power-over-Ethernet (PoE) switches open up remote powering opportunities. With 15.4 W power output limit per port, they can supply electrical power and data to IEEE 802.3af-compliant end devices over existing...

Read More »
Switch/Converter features pushbutton on front panel.

Switch/Converter features pushbutton on front panel.

Facilitating access to any one of 8 separate fiber optic networks, QuickSwitch Model 4193 with pushbutton eliminates plugging and unplugging of fiber optic patchcords, minimizing connector wear. Internal circuitry ensures isolation between networks/devices, where as common port converts selected fiber optic network port to 100BaseTX interface. Eight network ports of switch are 1,300 nm 100 Mbps...

Read More »
Network Switch features board only design.

Network Switch features board only design.

With serial remote control port, PathwayÂ-® Model 7423 RJ45 Cat5 A/B/C/D Switch allows users to share single RJ45 interface device connected to common port among 4 other devices. Switch provides board mounted pushbutton control or remote control via ASCII RS-232 serial data sent through its remote port, allowing users to remotely monitor status, control switch functions, and lockout front...

Read More »
Proportional Momentary Pushbutton withstands harsh areas.

Proportional Momentary Pushbutton withstands harsh areas.

Pro-Switch Series uses Hall-effect technology, providing user with output proportional to movement of switch actuator. Supplied in environmentally sealed (IP40, IP67) enclosure, product can be incorporated into any Cyber-Tech Industrial control handle or used as standalone proportional switch. It provides smooth and precise linear movement with signal level output from 0.50-4.50 Vdc, overall...

Read More »
Illuminated Rocker Switches feature snap-in mounting.

Illuminated Rocker Switches feature snap-in mounting.

Designed with current ratings of 9 A at 125 Vac or 6 A at 250 Vac, miniature CWSC Series is available with full face LED illumination in red, green, or amber to give operators at-a-glance status indication. Mechanical life of 30,000 operations minimum is made possible by quick-make, quick-break contact mechanism, which limits arcing. Constructed with polyamide housing and polycarbonate rocker,...

Read More »
Pump Protection Switch operates in tough environments.

Pump Protection Switch operates in tough environments.

Suited for applications where pipe or wall mounting with minimal protrusion is required, Gladiator Admittance Pump Protection Switch can be used to detect presence of liquids to ensure pump will never run dry. It is immune to build-up and can monitor materials with range of dielectric constants. Communicates is accomplished via Modbus, HART, or Profibus protocols, and remote amplifier can be...

Read More »

Unmanaged Gigabit Ethernet Switch offers 12 or 24 ports.

Designed to enable continuing growth in network communications traffic, NETernity(TM) CP981RC 6U Layer-2 Switch enables users to configure maximum number of communications ports within single or dual CompactPCI slot. Device features front I/O and supports 10BaseT, 100BaseTX, and 1000BaseT as well as 1000BaseSX and 1000LX interfaces. With hot-swap capability, switch is field replaceable while...

Read More »
Illuminated Switch is splash- and vandal-proof.

Illuminated Switch is splash- and vandal-proof.

Available with gold, nickel or SS finish options, BH Series offers multiple LED color choices including bi-color illumination. Electrical ratings are 2 A at 36 Vdc, 1 A at 125 Vac, or 0.5 A at 250 Vac, and electrical life is 50k cycles with contact resistance of less than 50 mW. Actuation force of 16 mm body is 500 Â-

Read More »

Printer-Sharing Switch is compatible with PCs and Macs.

USB 2.0 Printer Auto Sharing Switch comes with 2 USB cables for connecting 2 computers to one printer; switch automatically recognizes which machine print job is coming from. It does not require an external power source and has LED indicators to show which computer has USB access. Also available, 4-Port USB Net ShareStation lets small offices share resources by enabling multiple users to access...

Read More »
Sponsored

Simple Connection – MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics