Silicone

Thermally Conductive Silicone protects electronics.
Encapsulants

Thermally Conductive Silicone protects electronics.

With 1:1 mix ratio, flexible 50-1952 cushions electronics from vibration and impact, and is specially formulated for quick thermal transfer away from heat generating electronic devices. Non-corrosive silicone potting and encapsulating compound is made without use of harsh solvents or other toxic materials and is not hazardous to ship. Operating from -65 to +235°C, low-exotherm...

Read More »
Silicone

WACKER Eliminates Boron-Containing Additives from Silicone Lubricant Pastes

Munich - The Munich-based chemical company WACKER presents three novel silicone lubricant pastes for the fitting of cable accessories for the transmission and distribution (T&D) industry: WACKER® SILICONE PASTE P 250 and P 300 as well as the newly formulated lubricant POWERSIL® PASTE AP. The pastes are free of boron-containing additives and therefore particularly environmentally and...

Read More »
Silicone

Low-Density Silicone suits aerospace sealing applications.

With specific gravity of less than 1, AMS 3302 and AMS 3303 Silicone Material has same physical properties of traditional silicone materials, but with less weight. Developed to meet international specifications, material withstands extreme temperatures, is resistant to common aircraft fluids, and can be combined into fireproof constructions. It is suitable for aerospace sealing applications,...

Read More »
Loctite® Liquid Optically Clear Adhesives Advance Touch Panel and Display Assembly
Silicone

Loctite® Liquid Optically Clear Adhesives Advance Touch Panel and Display Assembly

Dual Cure, Low Shrinkage Technologies Control Mura; General-Purpose LOCAs Absorb Impact, Allow Thinner Designs Rocky Hill, Conn. - As touch panel interfaces become the norm on mobile devices, laptops and tablets, Loctite® Liquid Optically Clear Adhesives (LOCA) from Henkel Corporation are improving the viewing experience, increasing display durability, extending product life, reducing power...

Read More »
Tubes and Tubing

Silicone Extrusions and Tubing are listed to NSF-51.

Designed to resist high temperatures, Silicone Formulations come in silicone tubing for fluid conveyance, custom silicone extrusions for gaskets and seals, and molded silicone products. Compounds are listed to NSF-51, Food Equipment Materials and offer resistance to animal fats and steam exposure, making them suitable for commercial cooking equipment and food holding apparatuses.

Read More »
WACKER Presents New Silicone Rubber Grades for Baby Care Applications
Rubber Injection Molding Services

WACKER Presents New Silicone Rubber Grades for Baby Care Applications

Munich - At PLAST 2012, WACKER, the Munich-based chemical group, will showcase novel silicone rubber grades for manufacturing pacifiers and bottle nipples for infants and toddlers. These new grades include two liquid silicones of the ELASTOSIL® LR 3040 product line and two ELASTOSIL® R plus 4020 solid silicones. An outstanding feature of all four products is the high - and in the case...

Read More »
Non-staining Silicone has sanitary formulation.
Silicone

Non-staining Silicone has sanitary formulation.

Combining silicone durability with mildew and mold resistance, 898NST also eliminates potential for staining of natural stones such as granite, marble, and limestone. Neutral cure solution, featuring USDA acceptance, is suited for use in hospitals, schools, clean rooms, kitchens, and bathrooms. It can also be used for resetting or re-grouting ceramic or natural stone tiles.

Read More »
Miscellaneous Compounds

WACKER Intensifies Collaboration with Russian Silicone Producer

Munich- WACKER, the Munich-based chemical company, and Russian silicone producer Penta 91 are intensifying their collaboration in the Russian market. Penta 91 will immediately start selling WACKER's hot- and cold-curing two-component silicones in addition to the existing solid silicone rubber grades. The company has already been manufacturing special silicone compounds using WACKER materials for...

Read More »
Silicone

Rogers to Show Its Bisco Silicone Products for Rail Transport Applications at the 2011 Apta Show In New Orleans

Chicago, IL - The High Performance Foams Division of Rogers Corporation (NYSE: ROG) will be exhibiting its BISCO® MF-1(TM) seating materials and BISCO® L3 foams for use in rail transport flooring systems at the American Public Transportation Association (APTA) show to be held in New Orleans, LA, (Booth #5254), on October 3-5, 2011. Visitors to the Rogers booth at the APTA show can...

Read More »
Miscellaneous Agents

Global Silicone Leader Dow Corning to Showcase Proven Pressure Sensitive Products at Labelexpo Europe

MIDLAND, MICH. - Thousands of visitors to Labelexpo Europe will have the opportunity to learn about proven silicone pressure sensitive solutions from Dow Corning, a global leader in the industry. Dow Corning will occupy booth 6F110 at Labelexpo Europe, which will take place Sept. 28 through Oct. 1 at the Brussels Exhibition Centre in Brussels, Belgium. Visitors to the booth will experience some...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics