New SSDC Series StepSERVO Drives Feature Dual-Port Communications
Offer 8 digital inputs, 4 digital outputs, 2 analog inputs, encoder outputs and secondary encoder inputs. Comes with a range of communication options including EtherNet/IP, Modbus and SCL over Ethernet or RS-485. Available with two power levels SSDC03 and SSDC10 drives that provide 3.0 A/phase peak-of-sine to the motor and 10.0 A/phase peak-of sine to the motor respectively.
Read More »
Latest DC Motor Drives from ElectroCraft Comes with CompleteArchitect and MotionPRO Software
Offers multiple control methods including analog velocity, analog torque, or step & direction positioning, and is compatible with wide range of motor architectures. Includes brushless DC motors, PMDC brush motors, open-loop and closed-loop stepper motors. Supports12 to 80 VDC motor windings and provides up to 24A continuous and 60A peak output current.
Read More »
New Extreme Power-Density Servo Drive is ideal for DC/Battery-Operated Missions
Operating temperature ranging from -40°C to 70°C and can withstands mechanical shocks of up to 20g or vibrations of up to 14.6Grms (2kHz). Delivers up to 270A of continuous current and up to 200V (60A) with a ~99% power conversion efficiency. Suitable for harsh environment applications with extreme current capability in a compact form factor.
Read More »
Kollmorgen to Showcase Latest Motion Innovations at PACK EXPO 2019
RADFORD, VA – August 21, 2019 – Kollmorgen will exhibit its industry-leading motion control technology, including exciting new products, at Pack Expo, September 23 - 25, 2019, in Las Vegas, NV. Attendees are invited to visit Booth C-3726 to learn how the company’s new AKD2G servo drive and AKM2G servo motor system, software solutions for automatic guided vehicles (AGVs), robotic...
Read More »
Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application
Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.
Read More »
New DZRALTE Series Digital Servo Drives Available with Dual Loop Feedback
Controls brushed & brushless servomotors in compact form factor. Operates in torque, velocity, or position mode and employ SVM for high bus voltage utilization and reduced heat dissipation. Feature RS-232 interface for drive configuration and setup as well as RS-485 interface for drive networking.
Read More »
New ODVA Conformant Drives and Motors Perform Positioning, Velocity and Motion Control Tasks
SV200 Digital Servo Drives provides advanced performance and auto-tuning with multiple control options. ST Stepper Drives includes stall detection, stall prevention, microstep emulation and anti-resonance. StepServo™ Integrated Motors features high-resolution incremental encoders and closed-loop servo firmware.
Read More »
New FE060-25-EM Features Size of 1.5 x 1 x 0.6 Inches (38 x 25 x 16 mm)
Supplies brushed, brushless, stepper and linear servo motors with up to 25 amps continuous current and 50 amps peak current. Features 10-55 VDC supply voltage, 25A continuous current and 50A peak current. Includes torque, velocity and position operating modes.
Read More »
Advanced Motion Controls Presents AB25A100 PWM Servo Drive with Offset Adjusting Potentiometer
The AB25A100 PWM Servo Drive is designed for driving brushless and brushed DC motors at high switching frequency. The drive comes with built-in hardware protection such as overvoltage, under-voltage, over-current, over-heating and short-circuits. The unit is offered with DIP switches and potentiometers for loop turning, current limit adjustments and drive configuration. It accepts 20-80 VDC input...
Read More »
Applied Motion Products Exhibits New Integrated Servo Motors, Servo Drives & Stepper Drives at ATX West
Watsonville, CA…January 9, 2019…Applied Motion Products will demonstrate a selection of new integrated motors and drives for both servo and stepper motors at ATX West in booth #4264 to be held at the Anaheim Convention Center on Feb 5-7, 2019. Products on display at ATX West will include the following: MDX Integrated Servo Motors that combine high torque density, low inertia servo motors with...
Read More »
Aerotech Presents XL4s Linear Network Digital Drive with Servo-Loop Update Rate of 192 kHz
The XL4s Linear Network Digital Drive is used for closed-loop control of voice coil and single-phase motors. The drive comes with encoder interpolation feature, dedicated analog and digital I/O, fiber-optic interface and separate power connections for motor and control supply voltages. The parameters of the drive are software-settable that include control-loop gains and system safety functions....
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
