Metal-Cutting Saw produces burr-free cuts.

Cool Cut(TM) Saw cuts mild steel up to 5/16 in. thick, aluminum up to 3/8 in. thick, and stainless steel up to -¼ in. thick. Over 90% of chips and sparks are collected. Powered by 3,500 rpm and 15 A/1,200 W motor, it produces 2 in. deep cut. Features include 7 in. blade, chip collector, blade housing, aluminum base, guide handle with convenient guide edge, 45-

Read More »
Table Saw has vibration dampening cast iron construction.

Table Saw has vibration dampening cast iron construction.

Equipped with 1.5 hp TEFC motor that operates at speeds to 3,450 rpm, Model TS3650 features 40-tooth carbide-tipped blade and Herc-U-Lift(TM) caster system. Other features include machined-steel pulleys, poly-V-belt drive, and cabinet with oversized base. Saw has 36 in. right and 12 in. left rip capacities; front- and rear-locking, self-aligning rip fence with micro-adjust mechanism;...

Read More »
Band Saw cuts stock up to 6 in. thick.

Band Saw cuts stock up to 6 in. thick.

Equipped with -¾ hp TEFC motor, Model BS1400 includes upper and lower, micro-adjust blade guides and tilting table that allows for 45-° right to 10-° left bevel cutting. Riser-block accessory increases stock-thickness capacity to 12 in. Heavy-duty construction includes cast-iron table and frame, cast aluminum, precision-balanced drive wheels, and steel wheel covers and leg stand. Unit includes...

Read More »
Variable Speed Orbital Jig Saw has 6.0 A motor.

Variable Speed Orbital Jig Saw has 6.0 A motor.

Model R3120 includes die-cast gearbox for reduced vibration and auto-stop brushes. Variable speed dial (1,000-3,000 spm) with electronic feedback enables saw to maintain cutting speed. Saw has 5 orbital cut settings, adjustable base, and tool-less blade change capability. Dust blower clears dust away from cut direction. Tool comes with 3 bi-metal blades, vacuum adaptor, and anti-splintering inset.

Read More »
Reciprocating Saw offers variable speed.

Reciprocating Saw offers variable speed.

Model R3000 features 9 A of power, variable speed trigger switch, and 3 bi-metal blades for cutting through wood and steel. User can change speed in middle of cut, even when running at 2,800 strokes/min. Pivoting shoe adjusts with Allen wrench and can be moved in and out, depending on application. Saw includes overmolded front and rear rubber grips, die-cast gear housing, double insulation, and...

Read More »
Reciprocating Saw has D handle for user comfort.

Reciprocating Saw has D handle for user comfort.

Model WSR 900-PE incorporates smart power system that combines efficient gearing and load management sensor to continually monitor blade speed when under load, resulting in elimination of stalling during cutting. Product's D handle with multifunctional grip allows users to change hand position to maximize cutting efficiency. Additional features include 6-speed stroke rate regulator (0-2700 SPM),...

Read More »
Reciprocating Saw features 6-position pivoting handle.

Reciprocating Saw features 6-position pivoting handle.

Hatchet-® 7.5 A Corded Sawzall Model 6524-21 has steel connecting rod and steel gear that strengthens mechanism, allowing it to withstand impacts. It cuts at 0-3,000 spm with variable speed trigger. Saw provides orbital action and 3/4 in. blade stroke length for close quarter cutting. Quik-Lok(TM) blade clamp allows tool-less blade changes. Saw uses standard -½ in. shank Sawzall reciprocating...

Read More »
Automated Cross Cut Saw works with computerized panel saws.

Automated Cross Cut Saw works with computerized panel saws.

Series USA-50 cutting station, offered as add-on modular angular system, accepts stacks of material up to 75 mm high, 50 in. wide, and 10 ft long, which are automatically loaded from rear, packed, and squared prior to cutting. PC-based controller can be linked to master computer, and all cuts are executed without requirement of machine operator. After parts are processed, bar code labels are...

Read More »
Jab Saw cuts drywall, wallboard, plywood, and plastic.

Jab Saw cuts drywall, wallboard, plywood, and plastic.

No. 725 multi-use, 12 in. jab saw features 6 in. hardened, carbon steel blade with triple-ground teeth that can cut material on angle or curve, as well as in both directions. Hardened and beveled point at tip of blade allows user to score and make plunge cuts. With sharpened tip, there is no need for drilling before drywall start-up. Cushioned, comfort-grip handle features non-slip design as well...

Read More »

All Topics