Cordless Tool Kit uses lithium-ion batteries.

Providing up to 549 lb-in. torque, BSZ 18 Drill/Driver can drill up to -½ in. holes in mild steel and 1 3/16 in. holes in soft wood. No-load speed is from 0-450 and 0-1,450 rpm. Able to bevel cut up to 47°, 6-½ in. KSAP 18 Circular Saw cuts up to 2 1/8 in. deep at 90° and 1 5/8 in. at 45°. ASE 18 Reciprocating Saw delivers 0-2,700 strokes/min and has Quick blade-changing system. Kit also...

Read More »
Automatic Cold Saw provides infinitely adjustable rate.

Automatic Cold Saw provides infinitely adjustable rate.

Featuring factory set programmable controls, 14 in. Model D-350 FA makes trim cut to insure accuracy, then follows programmed instructions until completed and automatically turns off. Controller can be linked to communication port or interfaced with other controllers. Material feeder system uses servomotor with absolute feedback and ball-screw linear module. Offering 0.002 in. accuracy/ft of...

Read More »

Manual Cold Saw features variable speed operation.

With solid hinge-type design suited for prototype or limited production work, Model C315/350V single-phase saw offers infinite control over blade speeds from 24-105 rpm. Double vise assembly, with 6-¼ in. max opening, is mounted on slide assembly for optimal workpiece positioning and provides holding power on both sides of cut for burr-free operation. Components include 14 in. HSS blade, 3-phase...

Read More »
Miter Cutting Saw offers semi-automatic operation.

Miter Cutting Saw offers semi-automatic operation.

Model C-230 DGSA cuts rounds up to 9 in. dia and rectangles up to 11 x 6-½ in. at 90°, and incorporates head that swivels 45° left or 60° right. Dual output band motor drives 1 in. blade at 115 fpm using 1-½ hp output or 230 fpm with 2 hp output. Other features include adjustable hydraulic head feed control, band brush, double tapered bearings on swivel support, manual quick-lock vise, and...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »

Chop Saw features keyless blade change system.

Equipped with 15 A, 5.5 max motor HP, 14 in. model D28715 chop saw cuts 4-½ x 4-½ in. square pipe, 4-½ x 6-½ in. rectangular pipe, full steel bundles, and up to 5 in. round pipe. Saw has stamped steel base, allowing welding of out-feed tables to base of tool to support materials being cut, and pivot bracket for durability. Weighing 39 lb, unit includes heavy-duty lock-down pin, carrying...

Read More »
Cordless Reciprocating Saw utilizes lithium-ion battery.

Cordless Reciprocating Saw utilizes lithium-ion battery.

Measuring 19.5 in. long and weighing 7.7 lb, Model ASE 18 delivers 0-2,700 strokes/min with stroke length of 1 in. It features Quick blade changing system for tool-free blade changes and ergonomically designed handle to minimize operator fatigue. Equipped with charger, 2 battery packs, and assortment of saw blades, saw is suited for carpentry, roofing, and HVAC. Additional features include...

Read More »
CNC Bandsawing System minimizes set-up process.

CNC Bandsawing System minimizes set-up process.

Completely automating bandsawing processes, MBD® Model 4340 offers infinitely adjustable material clamp and max capacity of 60 x 20 x 14. Servo controlled feed table guides bandsaw blade along cutting path and through material. Machine eliminates need for templates and marking, automatically sawing block and panel materials. Automated process optimizes raw material yield, productivity, part...

Read More »
Portable Band Saw Blades feature bimetal construction.

Portable Band Saw Blades feature bimetal construction.

Heavy duty portable band saw blade product line measures .025 in. to promote beam strength and reduce deflection when used in tough applications. Rigidity allows for straighter cuts in wide variety of uses including solids and interrupted cuts. Shatter resistant for extended blade life, bimetal blade line is available at 44 7/8 x -½ x .025 in. in variety of straight and variable tooth pitches.

Read More »

Dado Blade Sets suit table and radial arm saws.

Precision Dado Sets feature precision matched blades roll- and hammer-tensioned by hand. Blade bodies are laser cut from nickel-alloy steel, then ground and hardened to Rockwell 42-44C, while arbors are honed to .0007 in. tolerance. Carbide teeth feature tri-metal brazing and are CNC sharpened with diamond wheels. Each set includes 2 outside blades, one -¼ in. chipper, two 1/8 in. chippers, one...

Read More »
Miter Bandsaw meets demands of structural steel industry.

Miter Bandsaw meets demands of structural steel industry.

HBP-510/923G Semi-Automatic Horizontal Miter Bandsaw features miter range of 105° (60° left, 45° right), with cutting capacity up to 35.4 x 19.6 in. for profiles and up to 20 in. for round materials. Frequency-controlled 7.4 hp drive motor has variable speed range from 65-460 sfm, and hydraulic hardened clamping jaws ensure steady cuts at all speeds. Weighing 6,280 lb and measuring 67 x 154 x...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics