Release Agents

Mold Release Agents and Sealers help produce polyurethane foams.
Release Agents

Mold Release Agents and Sealers help produce polyurethane foams.

Loctite® Frekote® PU7000™ is designed for open cell or gloss surface foams, while PU7001™ release agent and PU7200™ mold sealer are suited for flexible polyurethane or semi-rigid polyurethane foams. Spray applied at temperatures from 95-149°F are thermally stable to 450°F and dry in 30 sec when exposed to ambient moisture at 110°F. Solvent-based polymers offer...

Read More »
Mold Release Coating extends molding cycles.
Release Agents

Mold Release Coating extends molding cycles.

Intended for manufacturers of in-mold coated and flexible polyurethane molded products, Mold Release Agent 8016 offers unique blend of wax and silicone that helps keep mold surfacesÂ- clean. Robotic spray application of coating with low solids output from 12–18 g/min maximizes parts molded per gallon. Formulated to provide unblemished parts at mold temperatures from 110–145°F,...

Read More »
Release Agents

Release Coating 7814: Easy Release for Recylced Crumb Rubber

Leslie, MI -Â-  Release Coating 7814 is a solvent-based mold release formulated for the release of compression molded recycled crumb rubber containing a polyurethane binder. This unique blend of hydrocarbon solvents dries quickly on the mold surface, providing optimal performance and saving time for manufacturers with fast process conditions.    Developed for rubber floor...

Read More »
Release Agents

Thermoplastic Extrusion Enhanced with Specialty Lubricants

Thermoplastic extrusion applications are being improved with external lubricants used on the dies or nozzles shaping extruded products. With Huron Technologies' release agents precise color and consistent surface quality products can be delivered. At the same time, release agents also protect the nozzles or dies being used and allow quick, easy cleanup afterwards. In an on-going effort to provide...

Read More »
Release Agents

BASF and Julius Berger Nigeria Add Fine Finish to Lekki-Ikoyi Link Bridge in Lagos

DUBAI, UAE - Completion set for November 2012 The striking Lekki-Ikoyi Link Bridge in Lagos is Nigeria's first cable stay bridge. It's a landmark construction project that has seen the main contractor, Julius Berger Nigeria PLC make use of advanced construction techniques and products to overcome environmental and logistical challenges and meet stringent design specifications. BASF Construction...

Read More »
Boca Bearing Company Adds Sprayon, Krylon & Triflow Lubricant Products
Release Agents

Boca Bearing Company Adds Sprayon, Krylon & Triflow Lubricant Products

Boynton Beach, FL - The Boca Bearing Company is proud to announce the addition of the Sprayon, Krylon and Triflow product lines. This full line of lubricants, degreasers and maintenance products is now available from the company's new warehouse in Boynton Beach, FL. Covering a full range of specialty aerosol and pump nozzle products. The extensive number of Food Grade products is also ideally...

Read More »
Henkel Adhesives, Sealants, and Surface Treatments Allow Faster Wind Turbine Production
Release Agents

Henkel Adhesives, Sealants, and Surface Treatments Allow Faster Wind Turbine Production

GL-Approved Bonding Materials Provide Long-Term Structural Integrity for Turbines Rocky Hill, Conn. - To speed the production of wind turbines and increase their long-term reliability, Henkel Corporation offers a full line of adhesives, sealants and surface treatments that facilitate automated manufacturing of large composite components such as blades and nacelles, and bond, seal and protect a...

Read More »
Boca Bearing Company Adds Sprayon, Krylon, & Triflow Lubricant Products
Release Agents

Boca Bearing Company Adds Sprayon, Krylon, & Triflow Lubricant Products

Boynton Beach, FL - The Boca Bearing Company is proud to announce the addition of the Sprayon, Krylon and Triflow product lines. This full line of lubricants, degreasers and maintenance products is now available from the company's new warehouse in Boynton Beach, FL. Covering a full range of specialty aerosol and pump nozzle products. The extensive number of Food Grade products is also ideally...

Read More »
Release Coating optimizes appearance of direct attach soles.
Release Agents

Release Coating optimizes appearance of direct attach soles.

Developed to release polyether polyols typically used in manufacturing soles of safety shoes and boots, Release Coating 7996 minimizes scrap rates and build-up in mold cavity. Solvent-based release agent's chemistry aids in production of low gloss, defect-free dual density direct attach parts. Release Coating 7996 is available in 55 gal drums and 345 gal returnable stainless steel totes.

Read More »
Release Agents

Mold Release Agent suits FKM rubber seal applications.

Available in 5 gal pail containers and 55 gal drums, Release Coating 8020 is designed for use in fluoroelastomer applications and developed specifically for molders of FKM encapsulated metal inserts. Reapplication of this water-based, semi-permanent release agent can be done every fifth heat, promoting time conservation and productivity. Product qualities minimize scrap by preventing rubber from...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics