Controllers are offered with external message display panel.
Equipped with 4 built-in analog inputs, 4 counter analog inputs, and up to 200 memory blocks, FL1E SmartRelays can manage automatic lighting, access control, watering systems, pump control, or ventilation systems. Optional external message display panel with 4 x 12 backlit LCD provides visual interface to view system status at any time. Display is bargraph-capable and includes scrolling feature...
Read More »
Controllers are offered with external message display panel.
Equipped with 4 built-in analog inputs, 4 counter analog inputs, and up to 200 memory blocks, FL1E SmartRelays can manage automatic lighting, access control, watering systems, pump control, or ventilation systems. Optional external message display panel with 4 x 12 backlit LCD provides visual interface to view system status at any time. Display is bargraph-capable and includes scrolling feature...
Read More »Solid State Electrical Switches operate at 15-90 psi.
Self-contained within sealed housing, Electrical Switches employ solid state pressure sensor and surface mount interface electronics. Switches have separate solid-state PNP (sourcing) and NPN (sinking) outputs, and are rated at 200 mA each. They are used with QuickSTOP collision sensors, which operate on air pressure to immediately send shutdown signal on impact.
Read More »Solid State Electrical Switches operate at 15-90 psi.
Self-contained within sealed housing, Electrical Switches employ solid state pressure sensor and surface mount interface electronics. Switches have separate solid-state PNP (sourcing) and NPN (sinking) outputs, and are rated at 200 mA each. They are used with QuickSTOP collision sensors, which operate on air pressure to immediately send shutdown signal on impact.
Read More »
CMAA Crane Buyer's Guide
CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.
Read More »Solid State Relay targets security applications.
Employing optically coupled MOSFET technology, 60 V Model CPC1014N provides 1,500 Vrms of input/output isolation, 400 mA current handling, and 2 W of on-resistance. Normally open, 1-Form-A relay is housed in 4-pin SOP, and is especially suited for security systems complying with EN50130-4, passive infrared detectors, data signaling, and sensor circuitry applications.
Read More »Solid State Relay targets security applications.
Employing optically coupled MOSFET technology, 60 V Model CPC1014N provides 1,500 Vrms of input/output isolation, 400 mA current handling, and 2 W of on-resistance. Normally open, 1-Form-A relay is housed in 4-pin SOP, and is especially suited for security systems complying with EN50130-4, passive infrared detectors, data signaling, and sensor circuitry applications.
Read More »
Relays are approved for Class 1, Division 2 hazardous areas.
Featuring SPDT configuration with screw clamp termination, MICROSERIES Class 1 Division 2 relays come in 12 Vdc, 24 Vdc, 24 Vuc, 120 Vuc, and 230 Vuc versions. Each of 3 VUC versions accept AC and DC input signals for application flexibility. Also available, RC version features inductive kickback protection, via integrated RC circuit at input, to ensure safe switching threshold. All 6.1 mm wide,...
Read More »
Relays are approved for Class 1, Division 2 hazardous areas.
Featuring SPDT configuration with screw clamp termination, MICROSERIES Class 1 Division 2 relays come in 12 Vdc, 24 Vdc, 24 Vuc, 120 Vuc, and 230 Vuc versions. Each of 3 VUC versions accept AC and DC input signals for application flexibility. Also available, RC version features inductive kickback protection, via integrated RC circuit at input, to ensure safe switching threshold. All 6.1 mm wide,...
Read More »
Ground Fault Relay offers adjustable time delay of 0-1.5 sec.
Connected to WKE Series current transformer, RCD300M2 senses fault current, and if fault current exceeds relay trip setting, it activates and sends signal to disconnect high potential from equipment. Features include adjustable trip setting of 10 mA to 3 A, relay supply voltage of 24V AC/DC, or 120 Vac, 50-60 Hz, breaking capacity of 3 A at 240 Vac and 0.3 A at 110 Vdc, and fault indicator LEDs....
Read More »
Ground Fault Relay offers adjustable time delay of 0-1.5 sec.
Connected to WKE Series current transformer, RCD300M2 senses fault current, and if fault current exceeds relay trip setting, it activates and sends signal to disconnect high potential from equipment. Features include adjustable trip setting of 10 mA to 3 A, relay supply voltage of 24V AC/DC, or 120 Vac, 50-60 Hz, breaking capacity of 3 A at 240 Vac and 0.3 A at 110 Vdc, and fault indicator LEDs....
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
