Solid State Relays

RK Series Solid State Relays feature UL 100,000 cycle endurance test.

Extending current ratings 75 AAC per pole with proper heat sink, RK Series Two Pole Solid State Relay features output voltage rating of 600VAC. Offering Plug or connector control terminal, unit comes with 4-32VDC control. Providing output screw terminals for secure connectivity of cables with ferrules, relay offers pre-attached thermal pad. Confirming global standards such as UL 508, CSA C22.2...

Read More »
RK Series Solid State Relays feature single housing for two poles.
Solid State Relays

RK Series Solid State Relays feature single housing for two poles.

Conforming UL 508, CSA C22.2 and EN 60947-4-3 standards, RK Series Solid State Relays feature proper heat sink and output screw terminals for secured connection of cables with ferrules, ring or fork terminals. Rated at 600 VAC output voltage, with current ratings 75 A per pole, units offer common and independent control of two poles. Product is suitable for switching of resistive heating elements...

Read More »
Switches

ADGM1304 and ADGM1004 RF MEMS Switches gives 0Hz(DC).

Being 95% smaller than conventional relays, ADGM1304 and ADGM1004 RF MEMS Switches are faster, more reliable and consumes less power many times over. Product works with superior precision and RF performance from 0Hz (DC) to 14GHz. Switches have increased cold-switching that extends ATE equipment lifetime with reduction in downtime. Device can be surface-mounted on both sides of ATE test boards to...

Read More »
Thermistor Relays protect motors against overheating.
Protection Relays

Thermistor Relays protect motors against overheating.

Supplied in enclosures with widths of 17.5 and 22.5 mm, Sirius 3RN2 Series requires minimal space in control cabinet. PTC temperature sensors are integrated into motor windings to measure temperatures at points at risk of overheating within motor. Certified for Atex and SIL 1 according to EN 50495, relays are suited for centrifuges, braking procedures, frequent switching, and where there is risk...

Read More »
Eaton Releases Arc Flash Relay System feature high equipment uptime.
Arc Flash Protection Services

Eaton Releases Arc Flash Relay System feature high equipment uptime.

Designed to improve worker safety and maximize electrical assembly uptime by speedy clearance of arc flashes, Eaton’s Arc Flash Relay System measures light and current to do away with any nuisance operations. Suitable for low voltage (LV) and medium voltage (MV) electrical assemblies. System protects the workers in oil, gas, manufacturing and infrastructure industries. System meets NFPA...

Read More »
wiSTAR 0-10V Dimming LED Relay Module features EnOcean technology.
Relays

wiSTAR 0-10V Dimming LED Relay Module features EnOcean technology.

Using solar cells to harvest energy through compact motion sensors and rocker switches, wiSTAR 0-10V Dimming LED relay module is wireless, battery less and maintenance-free. Suitable for indoor applications, system is used with Navigan commissioning software that connects multiple sensors, switches and relay modules and programs an entire room at one time. Software and devices can be connected...

Read More »
DRML1 Load Monitoring Module monitors up to 8 heating elements from 1.2 Amps up to 50 Amps current range.
Modules

DRML1 Load Monitoring Module monitors up to 8 heating elements from 1.2 Amps up to 50 Amps current range.

Designed for NOVA22 solid-state relays, DRML1 Load Monitoring Module measures the current value and compares it against a pre-set value stored during installation. Applicable in quality supervision of plastic parts production in injection molding, thermoforming machines and rubber parts production. DRML1 Module operates in temperatures between 25°C to +70°C, monitoring of up to 8 loads,...

Read More »
Relays

Photorelays feature drive currents from 0.4 to 5 A.

Supplied in DIP8 package, models TLP3547, TLP3548, and TLP3549 offer pulsed ON-state current and can be used to replace mechanical relays in industrial applications. Total lack of physical contacts eliminates wear and deterioration concerns. While TLP3547 is 60 V photorelay with 5 A (max) drive current, 400 V TLP3548 features 0.4 A max drive current and high-speed switching of 1...

Read More »
IXYS Integrated Circuits Division's CPC1010N designed to replace electromechanical relays.
Solid State Relays

IXYS Integrated Circuits Division's CPC1010N designed to replace electromechanical relays.

Designed and packaged in a 4-pin SOP, CPC1010N uses optically coupled MOSFET technology giving out 1500Vrms of input to output isolation. Suitable for industrial applications, multiplexers, data acquisition, and electronic switching, 250V 1-Form-A Solid State Relay features a double-molded vertical construction packaging making it one of the world’s smallest relays. MOSFET switches and...

Read More »
Safety Gate System provides holding force of 7,500 N.
Safety Equipment

Safety Gate System provides holding force of 7,500 N.

Suitable for small and light as well as large and heavy doors and gates, PSENmlock offers safety gate monitoring and safe guard locking for protection of personnel and processes to highest PL e in one device. Currentless guard locking system uses bistable magnet, minimizing energy consumption. With holding force of 7,500 N and integrated latching force of 30 N, safety gate system prevents guard...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics