Heavy Duty Power Relays feature protective cover.
Relays

Heavy Duty Power Relays feature protective cover.

Available with full range of coil voltages including 6–480 Vac and 6–250 VDC, 450 Series is equipped with protective cover that snaps on and can be removed in tight locations if needed. Cover provides clear view of relay's operation while protecting fingers and keeping dirt and dust from causing premature failure. RatedÂ- up to 40 and 50 A applications, relays include Class F...

Read More »
Solid State Relays

Solid State Relay features 80 mA load current rating.

Featuring single-pole, normally closed design, 800 V Model PLB171P is designed to provide 7 mmÂ- of separation between 2 output pins and uses optically coupled MOSFET technology to provide input-to-output isolation of 5,000 Vrms. Optically coupled outputs are controlled by infrared LED. Designed to replace electromechanical relays, PLB171P provides bounce-free switching in compact...

Read More »
Analog Signal Conversion Transducers install in tight areas.
Limit Switches

Analog Signal Conversion Transducers install in tight areas.

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. OfferingÂ- adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports...

Read More »
AC to DC Power Supplies

Vishay Intertechnology to Exhibit Industry-Leading MOSFETs, ICs, Passive Components, Diodes, and Optoelectronics at APEC 2016

MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the Applied Power Electronics Conference and Exposition (APEC) 2016, taking place March 20-24 in Long Beach, California. In booth 2017, the company will be highlighting its latest industry-leading power MOSFET, IC, passive component, diode, and optocoupler technologies for a wide range of...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Standex-Meder Electronics to Exhibit Sensors, Relays, and Magnetics at Electronica China 2016
Reed Relays

Standex-Meder Electronics to Exhibit Sensors, Relays, and Magnetics at Electronica China 2016

Wide range of sensors, relays, and magnetics in various industries to be displayed at Electronica China 2016, Booth Hall E3, 3332 Standex-Meder Electronics, a leading manufacturer of precise, reliable, and long-lasting sensors and magnetic components worldwide, will highlight its product line at the Electronica China 2016 Expo. This year’s Electronica China is being held March 15-17, 2016 at...

Read More »
SIL 3-Rated Safety Relays measure as thin as 6 mm.
Relays

SIL 3-Rated Safety Relays measure as thin as 6 mm.

Available in 6 mm (slim) and 12 mm (compact) form factors, PSRmini allows for 6 A, force-guided safety connections. Slim variants haveÂ- 1 or 2 NO safety-rated contacts, while compact variants have up to 3. All products switch loads up to 6 A and are compatible with various signaling devices, such as emergency stop equipment, safety-door switches, and light grids. Approvals...

Read More »
Proportional Output Controller has analog input, solid-state design.
Solid State Relays

Proportional Output Controller has analog input, solid-state design.

Upon input from analog signal, single-phase RGx1PÂ- calculates and delivers necessary output power without requiring additional interface device. User-selectable switching modes – full cycle, phase angle, and soft start – let operators address different application requirements. While RGC1P contactors (15–63 A switching) have integrated heat sink, RGS1P...

Read More »
Safety Relay Unit offers facilitated installation/troubleshooting.
Relays

Safety Relay Unit offers facilitated installation/troubleshooting.

Targeting machine builders, G9SEÂ- has screw-less, push-in terminal that accelerates and facilitate installation as well as diagnostic LEDs that aid troubleshooting. Front access terminals accelerate wiring installation and facilitate location of terminal references. Modules with 2 or 5 safety contacts and OFF-delay timing are available, and 17.5 or 22.5 mm width reduces panel space...

Read More »
Miniature Power Relays consume 67.5 mW at pickup.
Relays

Miniature Power Relays consume 67.5 mW at pickup.

Rated for 15–20 Amps, AZ7555 Power Relays are available in standard, sensitive, and super sensitive versions that guarantee fail-on/off without additional circuitry. Units are suitable for applications from 3–110 Vdc with continuous power dissipation (max) of 1.2, 0.9, and 0.2 W, respectively, at 68°F. Offered with SPST (1 Form A) and SPDT (1 Form C) silver tin oxide contacts, relays...

Read More »
General Purpose Relay features maximized UL performance ratings.
Relays

General Purpose Relay features maximized UL performance ratings.

With Class F insulation (155C) as standard and 5.0 mm pin spacing, AZ576 series targets applications in appliance, lighting, controls, andÂ- similar industries. Electromechanical relay, at 277 Vac, delivers ratings of 20 A for 30K cycles at 85°C or 17 A for 100K cycles at 105°C. General-purpose, pilot-duty, HP, inductive, and TV loads round out top UL ratings of this series. Coil...

Read More »

All Topics