Latest PLA172P 800V Solid State Relay Offers 5 mA Low Input Control Current
Features device pinout that provides more than 6.8 mm. of pad-to-pad separation between high voltage output pins preventing arcing. Operational temperature range from 85 ºC up to 105 ºC, enabling hardware engineers to design circuits at very challenging temperatures. Applications includes industrial, instrumentation, medical, isolation test equipment, battery isolation monitors, and industrial...
Read More »
New AZSR143 Power Relay is Ideal for Solar and EV Charging Applications
Features 1.8mm contact gap, 4500Vrms dielectric strength and minimum holding power of 196mW. Offers maximum UL/TUV switch rating of 50A@277VAC with 6K cycles. Ratings include 43A@277VAC (85°C) and 33A@277VAC (105°C) with 30K cycles each and 50A@277VAC carry current with 50K cycles (on/off) at 20A.
Read More »
New PanL Relays from Bridgetek are CE and FCC Compliant
Come in low-profile enclosures in 145.7mm x 96.7mm x 29.50mm dimension and are packed of sophisticated electronic technology. Feature high-performance, 100MHz-rated, 32-bit FT903 RISC microcontroller unit (MCU). Can connect to Bridgetek PanL Hub that lies at the centre of the home automation system, via RS485 interfaces.
Read More »
New Panel Mounted Solid State Relay Features Zero Voltage Turn-on Switching
Offers reliable back-to-back SCR switching up to 75 Amps at 528 VAC. Available with standoffs for PCB mounting and features LED input status indicator. Designed for use in a wide range of consumer and industrial systems and products where precise power control, long life, reliability and reduced levels of electromagnetic noise are required.
Read More »
Designing a cast or forged component? What Industrial Designers Need to Know About ‘Design for Manufacturing' Before Reaching for a Pencil.
To learn more about how you can save time and money with design for manufacturing strategies, download now.
Read More »
New Motor Control Relays Include LED Status Indicator
Intrinsically safe relays provide safe and reliable control of loads within hazardous locations. Phase monitor relays provide protection against premature equipment failure caused by faults on 3-phase systems. Alternating relays are used where the optimization of load usage is required by equalizing the run time of two loads.
Read More »
New Relay Series Available with Dielectric Strength of 4,000 Vrms
Includes isolated signal monitoring contact to allow detection of any possible welding issues with the main contacts. AZEV116 relay withstands short circuit more than 1.02 kA and 2.5 kA²s. AZEV132 relay features electrical lifetime of 50,000 switching cycles at 16A, 277 VAC.
Read More »
New Overload Relays Available at up to 175A
Offers additional trip classes, connections to any contactor and wide amperage range. Can be separately mounted to NEMA, IEC and DP contactors. Ensure a broad full-load-amperage range (0.33-175A) and selectable trip classes (10A, 10, 20, 30).
Read More »
New Three Phase Monitoring Relays Feature Switch Mode Power Supply
DPB and DPC series has an input voltage range of 208 VAC to 480 VAC and 208 VAC to 690 VAC. Feature an expansive frequency range of 50 Hz to 400 H. Ideal for protecting motors from severe damage that can result from loss of a phase, phase imbalance or phase reversal.
Read More »
New DR67 and PM67 Series Relays for Industrial Power Applications
Feature high power density of up to 75 amps at 600 VAC per channel at 40°C in a compact. Available in DIN rail or panel mount versions. Ideal for applications such as pump controls, HVAC&R, industrial ovens, plastic injection, molding, food processing equipment and packaging equipment.
Read More »
New IA-2886-E Features 48 Solid-state Relays
Designed for delicate ATE use and can fit to machine control, building control, factory floor, security and monitoring. Capable of handling various loads, various UUT input circuits and also circuits. Includes input circuits which can be set to behave as LVTTL devices or TTL devices in order to fit present UUT circuits.
Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.
Read More »
