New Racks Products

Battery System provides life of up to 20 years.

Valve-regulated PowerSafe DDm, for telecommunications, power generation, and UPS applications, has integral racking system. Cells have welded-epoxy, dual-post seals that are 100% water bath tested. Each provides from 200-2000 Ah. Lead-cast terminal posts, with large, threaded, copper inserts, provide maximum conductivity. Steel cans provide uniform compression for transport and installation....

Hanging Rack attaches to any shelf.

Hanging Rack accessory screws into bottom of shelf and puts Rack equipment within reach on workstation. Available in 1, 3, and 9 unit sizes, and made of 11 gauge steel, assembly holds up to 100 lb. Height of 1 Unit Rack is 1.75 in., 3 Unit Rack is 5.25 in., and 9 Unit Rack is 18.25 in., all with width of 22 in. Two Hanging Racks can be used to securely hold extra long rack equipment.

Newspaper Dispensers resist corrosion from salt spray.

Sabre 83 Honor, with one-piece, galvanized cabinet, has elevator shelf with springs and plastic paper holder with Z-Bar. With 12 ga galvanized step-down base, unit offers HD UV-coated .080 window plastic. Magazine Model RR-1, offered with split shelves or divider options, includes built-in trough at front of shelf area to trap moisture and drain it away without damage to publications. Unit, with...

Pipe Racks are available in two types.

Custom, pre-engineered units handle pipe diameters up to 12 in., live loads of 30 psf per level, and wind loads of 90-120 mph. T-support racks are suited for lighter loads where space is limited, while bent racks support heavier loads and longer pipe runs. Both types of racks are available in multiple levels, are base plate mounted, and clear heights from 10-20 ft. Custom pipe bridges and service...

Construction Materials for the Future

In this eBook, we highlight some key advantages of Cross-Laminated Timber (CLT) and show why every builder needs to consider adopting this remarkable construction advancement. We'll also introduce you to the latest innovation in CLT, GRIPBlock™, an exciting new technology that will change the way you look at CLT forever.

Open-Frame Racks accommodate networking equipment.

With load rating of 2,500 lb, DataCom 4-post, open frame racks securely accommodate LAN/WAN equipment, voice/data equipment, routers, servers, and switches. Available with 6, 7, and 8 ft frame heights, 3 models are offered in 38, 45, and 51 rack unit sizes, respectively. EIA RS-330-D standard racks are constructed of extruded aluminum and range in weight from 70-80 lb. Racks are adjustable for...

Racks and Consoles are seismically qualified.

Custom 19 in. cabinets can be designed with single bay, 2-bay, 3-bay, or 4-bay configurations. Racks and consoles have front to back adjustable EIA rails or frame integrated mounting hole patterns. Vertical heights and depths are modified to customer specifications. Structures of cabinets are seismically qualified by Finite Element Analysis that permits computer based simulation and analysis of...

Mud Racks are used with Cyclonator-® wash system.

Heavy Mud Racks feature solid tread plate surface, gradual slope to center trough and 10,000 lb capacity wheel load. Trough is 12 in. wide and is easily cleared with flat shovel. Optional conveyor automatically dumps mud into hopper for easier disposal. Filtration and recovery system insures that center rack is always dry and filtration system recycles 24/7 insuring clean wash water.

Shelving, Racks, and Cabinets organize work areas.

Steel Shelving Systems are made from 22-gauge steel with baked enamel finish and are offered with bin systems. Shelf Bin Systems are 36 in. wide x 75 in. high with depths of 12 and 18 in. Capacity is 350 lbs per shelf. Polypropylene Shelf Bins with hopper fronts are available in depths of 12 and 18 in. and 5 different widths. Pick Racks provide high-density storage with bench-height,...

Roll-Out Shelves provide mold, die, and fixture storage.

Powered roll-out shelves are designed for storing molds, dies, fixtures, and other heavy, hard to maneuver items. User rolls out shelf, picks up item with overhead crane, and moves it directly into area where needed. Custom sizes are available with capacities up to 40,000 lbs per shelf.

Cart Pushback System supports up to 3000 lb per position.

Full support, level-cart pushback system can store pallets that have been damaged, pallets with no bottom boards, 9-legged pallets, and pallets ranging in size from 30 to 72 in. It is available in 4-strut, wire-deck, and diamond-plate models.

Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine

The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.