Plug-In DSP Board adds audio capabilities to MCU-based designs.
Based on C5000(TM) ultra-low-power (ULP) DSP, Audio Capacitive Touch BoosterPack (430Boost-C55audio1) is plug-in board for MSP430(TM) LaunchPad development kit. DSP is solely controlled by MCU, allowing designers to add audio and other real-time features to their system without DSP programming experience. Solution is suited for low-power applications that use record and playback audio functions,...
Read More »Multicore Digital Signal Processor has 21 x 21 mm form factor.
Featuring combined fixed- and floating-point capabilities, TMS320C665x is based on KeyStone multicore architecture and delivers real-time performance. Products meet need of video security and traffic management, where there exists need to carry out both video processing and analytics at end point. Single-core C6655 and C6654 deliver up to 40 GMACs and 20 GLOPS and 27.2 GMACs and 13.6 GLOPS,...
Read More »MEI's Pura(TM) Wet Processing System Achieves Breakthrough for Ultra-Pure Polysilicon for Solar Cells
Company's unique process achieves highest purity polysilicon in any form factor-from granules to chunks - dramatically reducing energy, water, and chemical consumption ALBANY, Ore. - March 26, 2012 - MEI, LLC has made a significant process breakthrough to create ultra-pure electronic-grade polysilicon ideal for manufacturing high efficiency photovoltaic (PV) solar cells and semiconductors. MEI's...
Read More »Express Logic's NetX(TM) Achieves Near-Wire Speed on STM32® Platform
NetX high speeds achieved with less than 35% CPU utilization Design West, ESC Summit, San Jose, CA - Express Logic, Inc., the worldwide leader in royalty-free, real-time operating systems (RTOS), announced that its NetX(TM)Duo TCP/IP stack has achieved 93-95 Mbps, an outstanding near-wire speed on STM32F207 and STM32F217, STMicroelectronics' ARM(TM) Cortex-M3 processors. NetX Duo, Express Logic's...
Read More »
Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up
This white paper provides an in-depth overview into choosing the right bearing for machine tools.
Read More »Digi International and Wind River Collaborate to Create New Class of Cloud-Connected Wireless M2M Solutions Based on Intel Architecture
- New M2M Solution Builder kit will enable smart connected devices and services based on Intel architecture, Wind River software and iDigi Device Cloud(TM) - DESIGN WEST, SAN JOSE, Calif. - Digi International (NASDAQ: DGII) and Wind River, today announced a collaboration to deliver a new family of cloud-connected wireless machine-to-machine (M2M) solutions. The M2M Solution Builder kits will...
Read More »Vivante and Cadence Unveil Mass Market GPU - Optimized DDR Memory Solution
Vivante and Cadence Enhance Graphics Performance on Consumer Devices Through Memory Design Collaboration SUNNYVALE, Calif., March 14, 2012 - Vivante Corporation, a worldwide leader in graphics and visualization technologies for handheld and consumer devices, today announced that it has worked with Cadence (NASDAQ: CDNS) to qualify the Cadence double data rate (DDR) Memory controller on-chip...
Read More »ReVera Retires the RVX 1000(TM), the Semiconductor Industry's First Production Capable XPS System
Santa Clara, CA - ReVera will discontinue the RVX 1000, effective December 31, 2012. The RVX 1000, ReVera's first product, has been in service for over eight years and was originally developed to qualify transistor gate oxides, such as plasma SiON, and rapidly became the first production metrology tool to measure film composition. The product was also the first production-capable platform to use...
Read More »Hammer Mills: The Ideal Tool for Grinding Spices
The hammer mill is the best tool for processing spices, because of its operational flexibility, and the ability to control finished particle size. With the exception of high oil content spices such as nutmeg and mace (unless cryogenically frozen), the hammer mill is ideal a wide variety of spices, and dried herbs including: red pepper, white pepper, black pepper, coriander, cumin, cinnamon,...
Read More »Processor Module supports automation and SCADA applications.
Based on 32-bit, 505 MIPS PowerPC processor, Model MS-CPU32X supports up to 20 serial ports in T-BOX MS RTU installation. Unit uses Linux core and includes 2 Ethernet ports, 2 SHDSL modems, 1 RS232, and 1 RS485 port. With resolution of 1 ms, module supports sequence-of-events recording. Information stored with millisecond resolution can be displayed in tabular and trend chart reports as well as...
Read More »Texas Instruments and 6WIND Announce Packet Processing Software Optimized for TI's KeyStone II Multicore Processors
6WINDGate software accelerates time-to-market for TI customers designing networking products in mobile and cloud infrastructure markets DALLAS -- Texas Instruments Incorporated (TI) (NASDAQ: TXN) and 6WIND, the gold standard for software-defined networks, today announced support within the 6WINDGate(TM) software solution for TI's new scalable 28-nm multicore processors based on its recently...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
