New Power Supplies Products

Step-Up DC/DC Converter includes true output disconnect.

Featuring inrush current limiting and integrated soft-start, 3 MHz Model LTC3422 delivers up to 700 mA continuous output current at 5 V from single cell Li-ion input. Internal switches provide 1.5 A current limit and deliver output voltages up to 5.25 V from input voltage of 0.5-4.5 V. Synchronous rectification enables efficiencies up to 96%, while Burst Mode(TM) operation lowers quiescent...

AC-DC Power Supply suits medical applications.

Employing multiple resonant topology, which uses synchronous rectification to achieve efficiencies up to 90%, 350 W Model NV-350FEP delivers 7 W/cu-in. In addition to main output of 12 V at 29.2 A, unit is supplied with auxiliary output of 12 V at 0.5 A. Third, stand-by output of 5 V at 2 A or 12 V at 1 A can be selected as part of option card. Model NV-350FEP comes in 1.6 x 3.75 x 9.15 in....

Midspans power VoIP applications.

Available in 1-, 8-, 16-, and 24-port versions, Midspans power ports to specification limits of 802.3af while providing single point of backup for all VoIP phones. Midspan is used to implement PoE into existing network where power can be inserted on spare pair. Offering 15.4 W per port, midspans give full power to all ports so there is no need for calculating which devices to connect. USB port...

Redundant Power Source provides 180 PoE ports.

Accepting three 500 W power supplies for powering VoIP phones, DC UPS, and lighting systems, Redundant Power Source features diagnostic capabilities and LEDs next to each connector. Each output is individually protected against overloads that cause overheating of wiring from excessive current, thus fully protecting system against overload, over-temperature, and over-voltage. Unit measures 17.25 x...

How to Choose a Servo Controller for Your Application

Choosing the best controller for your specific application is of the utmost importance. This white paper offers an overview of feature and motion profile considerations.

Power Supply delivers 325 W at airflows down to 200 lfm.

Incorporating IPMI reporting functions for output voltage, output current, and temperature, 3U x 8 hp CompactPCIÃ-® Model CPCI325D-1 delivers full power of 325 W across operating temperature range of 0-50Ã-

DC-DC Converters have isolated, RoHS-compliant design.

Available in SIP, DIP, or SMT packages, 1W series operates at efficiencies to 82% and is offered with fixed input ranges of 3.3, 5, 12, 15, and 24 V Ã-

Power Supply supports 802.11N wireless access points.

Providing 30 W, one-port midspan features diagnostic LEDs and is fully compliant with 802.3af standard in detection, disconnect, and voltage controls. DC output is 56 V with accurate overload detection to 0.55 A. AC input voltage range is 90-264 Vac, with voltage rating from 100-240 Vac and ac input frequency from 47-63 Hz. Power-over-Ethernet allows power and data to be carried over single...

Rack Mount Power Supplies feature floating channels.

HV RackÃ-® Series is configurable with up to 4 independent channels, each ranging from 0-62 V through 0-40 kV between 4 and 250 W. Users can configure 1-4 output channels to float any 0-4 W through 20 W, 0-15 kV or lower UltraVolt power supply. Series allows for power supply stacking or hot-deck configurations and features green-meter, visible in high-ambient-light conditions, that is suited...

Full-Brick DC/DC Converters have 700 W continuous rating.

Suited for use with RF power amplifiers, RFF series generates regulated intermediate bus voltage in telecom systems with distributed power architecture. Each model produces 28 Vdc output, which can be adjusted over 16.8-29.4 V range. Comprised of 5 isolated models with choice of 2 input voltage ranges and 3 output current ratings, series includes 7-10 Vdc auxiliary output as well as ability to be...

Step-Down DC/DC Converter comes in 5 x 3 mm DFN package.

Using constant frequency and current mode architecture, LTC3417 operates from 2.25-5.5 V input range and delivers up to 1.4 A continuous output current from one channel and 800 mA from other. This dual-output, synchronous buck regulator can generate 2 independent output voltages as low as 0.6 V, and its adjustable switching frequency from 0.6-4 MHz allows enables use of ceramic capacitors and...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.