New CU81xx UPS Designed for Rear Panel and DIN Rail Mounting
Features flexible communication capability which allows retrieval of status values for diagnostic purposes or the configuration of the UPS. Connection supports convenient implementation with UPS-OCT one-cable solution. Suitable for connection to entire range of Beckhoff components, panel and Embedded PCs.
Read More »
New AC-DC DIN Rail Mount Power Supply Delivers 48V at 10A
DRB480-48-1 has operating input range of 90 to 264Vac. Features power density of 6 Watts per inch3. Output can be adjusted from 48 to 52.8V to offset voltage drops in cabling.
Read More »
New PowerPAK for 4-20mA and HART Field Instrumentation
Supplies required field instrument power to remote-mounted or stranded devices. Battery-power power source is flexible, rugged, cost-effective and simple to install and use. Features push-button control and requires no software configuration.
Read More »
New MicroMax VLB LED Drivers from Environmental Lights are UL Listed and IP66 Rated
Provide up to 260 watts of 12 or 24 VDC power and are ideal for commercial LED lighting applications. Feature multiple wire outputs that can be run in parallel for single light use or split to run multiple lights. Offers gilled design for effective heat dissipation and are potted and fanless .
Read More »
The Comprehensive Guide to Photo Chemical Machining
There are many benefits that photo chemical machining can provide for your precision components. Download this white paper, and learn everything you need to know about this versatile process.
Read More »
New PES2200 Series Power Supplies from Bel Comes with Totem-Pole Bridgeless PFC
Offers digital control for servers, storage and networking equipment and other high-availability applications. Provides main output of 12 VDC for powering intermediate bus architectures (IBA) in data center and telecom central office equipment. Measuring 80 x 40 x 195 mm and has power density of 59 W/in3 that provides 12 V output plus an always-on 12 V standby output at 3.5 A.
Read More »
New Uninterruptible Power Supplies Provide Power Protection against Surges and Spikes
DTK-UPS600 suitable for home and office workstations, POS and lottery terminals, fuel pumps and access control systems. Includes Ethernet and PoE network protection and indoor/outdoor surge protection devices. Ensures power uptime that supports those vital systems through brief power outages.
Read More »
New HVI 2K-F6W Units Measure 254 x 65 x 349 mm, W x H x D
Operates between 700Vdc to 900Vdc input range, 800Vdc nominal input. Equipped with reverse polarity protection, inrush current limiting, output current limiting and short-circuit protection. Built-in redundancy diode allows for parallel and N+1 operation, or back-up battery connection.
Read More »
New External PSUs from XP Power Meet UL/EN/IEC62368 and IEC60950 Standards
Available in two models ALM150 and ALM200 which offers power levels up to 150W and 200W respectively. Offers five single output versions with output voltages of 12.0V, 15.0V, 19.0V, 24.0V and 48.0V and input voltage range from 80 to 264VAC. Housed in IP32 vent-free plastic case and can operate at temperatures between 0°C and +60°C.
Read More »
New UWS-Q12 Series DC-DC Converter Provides 2,250 Vdc Isolation
Delivers 50W power with efficiencies reaching 91 percent on the 5V, 12V, 15V and 24Vout versions and 89.5 percent on the 3.3Vout model. Features include positive or negative ON/Off control, output over current protection, over temperature protection, input under voltage lock-out, short circuit protection and pre-bias protection. Applications include network equipment, industrial, railway,...
Read More »
New BMR490 DC-DC Converter Enables Thermal Balance Between Load and Sharing Units
Enables two or more converters to be used in parallel for demanding datacom applications. Features high efficiency of typically 97.3%, with efficiency in parallel usage maximized by use without OR-ing diodes. Delivers high power on single rail and improving redundancy.
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
