New PH600A280 DC-DC Converter Comes with Remote On-Off, Over-Current and Over-Voltage Protection
Offers efficiency of 93% and can operate at full load with baseplate temperatures of -40°C to +85°C, derating linearly to 80% load at +100°C. Accepts 200 to 425Vdc input that delivers 24V at 12.5A and is certified to IEC/EN/UL/CSA 62368-1, EN 62477-1 (OVC III) with CE marking. Ideal for HVDC (High Voltage Direct Current) equipment for data communications, high voltage transmission, renewable...
Read More »
New PUB-2M Series DC/DC Converter is EN/UL 62368-1 Compliant
Delivers output power of up to 2W with no minimum load required and is available in single or dual output options. Offers output short-circuit protection and MTBF figures of 17.9Mhrs that achieves high efficiency up to 86.5% with 12V output under full load conditions. Operates in temperatures ranging from -40°C to +110°C and is ideal for harsh environments in industrial applications.
Read More »
New RCM60 DC-DC Converters are Protected Against Short Circuit with Automatic Recovery
Offer board battery voltages from 24 V to 110 V and isolated single output voltage of 12 V, 15 V or 24 V. Features integrated hold-up capacitors for 20 ms interruption, ORing FET and passive current share for parallel and redundant operation. Can operate fully loaded in cooled environment at temperatures from -40°C up to 70°C.
Read More »
New DC-DC Converter Features 500 mA Output Current
VXO78-500-M features no-load input current as low as 0.2mA and a wide -40 to +85°C temperature range. Offers a wide 4.75 to 36 VDC input voltage range, short-circuit protection and 4-SMD reflow solderability in an ultra-compact SMT package with half-vias corners. Ideal for ITE, controls and electronics that require a wide input at a low cost.
Read More »
Choosing the Right Type of Chemical Gauge
Understanding the Differences in Chemical Gauges and Their Material Options
Read More »
New PUC-2B Series Miniature DC-DC Converters are EN/UL 62368-1 Compliant
Available in single or dual output options and deliver output power of up to 2W, with no minimum load required. Offer operating temperatures ranging from -40°C to +95°C and are ideal for harsh environments in industrial applications. Housed in SIP7 package measuring 19.7 x 7.1 x 11.5 mm. and have mean time between failures (MTBF) rated at 12.9 million hours (Mhrs).
Read More »
New UPS Device Available in Desktop and Board-only Configurations
SCups® utilize Super Capacitors provides low maintenance solution with an high cycle life and without the shelf life concerns of typical battery backup systems. Assists with the fluctuating power of low power remote systems where primary power can be interrupted. Ideal for assistance with backup and peak assist power management for solar power, wind power, medical facilities/hospitals, remote...
Read More »
New DC-DC Converters Meet IEC/EN/UL 62368-1 Standards
Uses step-down non-isolated power modules that operate from input range of 9 up to 53Vdc, with a wide adjustable output voltage range of 3.3 up to 24V. Ideal for generating additional low cost, high current outputs from an existing 24V bus in industrial, semi fabrication and test and measurement equipment. Offers single nominal output +12V 20A, dual output +12V 20A / +5V 20A and dual output +12V...
Read More »
New TXP4000 Series Fan-Cooled PSU is RoHS Compliant and meets EN60950-1 Standards
Offers Maximum 4000 W and adjustable output voltage ranging from 30 V to 137.5 V. Includes DSP technologies that enables monitoring of electrical parameters and allows control of the PSU from a system controller. Accommodate 3-phase input voltage range of 350-528 Vrms at up to 63 Hz and features operating temperature range of -25° to +55°C.
Read More »
New Explorer 1000 Portable Power Station with AC Outlet, DC and USB ports
Meets the power supply needs of high and most power electrical appliances. Available with 1000W rated power, 1002Wh capacity and multiple output charge/recharge ports. Features three standard AC sockets, dual USB-C ports, two USB-A ports and one 12V carport.
Read More »
New 75W DIN Rail Power Supply with Built-in Constant Current Circuit
Comes with 12V, 24V and 48V output voltages which can fit into a space-constrained control panel. Operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. Allows cold start at -30°C even in extreme condition.
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
