Micro-Power Buck Converters (65 V) feature low quiescent current.

Micro-Power Buck Converters (65 V) feature low quiescent current.

Respectively intended for powering factory automation and automotive sensor applications, LM5165 and LM5165-Q1 are 65 V, 150 mA synchronous DC/DC buck converters thatÂ- feature 10.5 Â-µA quiescent current and 10-pin, 3 x 3 mm VSON package. Input voltage range of 3–65 V and dual control modes optimize efficiency and PCB area. Other features include dual MOSFETs, PFM and COT control...

Read More »
DIN Rail Power Supplies serve controlled environment applications.

DIN Rail Power Supplies serve controlled environment applications.

Cooled via convection, SVL Series features overload, under-voltage, and short circuit protection; 15–480 W range;Â- and 5, 12, 24, and 48 V combinations. Models above 120 W feature active power factor correction, whichÂ- reduces harmonic emissions. While dimensions allow use as alternative to embedded open frame switchers, clip-on DIN rail mounting facilitates...

Read More »
DC-DC Converters feature ultra-wide 4:1 input.

DC-DC Converters feature ultra-wide 4:1 input.

With 4:1 input range of 9–36 Vdc and 18–75 Vdc, 40 Watt ECLB40W and 60 Watt ECLB60W offer single output voltages of 3.3, 5, 12, and 15 Vdc as well as dual output voltages of -±12 and -±15 Vdc. RoHS-compliant converters feature efficiency up to 92%, regulated outputs, remote on/off, and 1,500 Vdc I/O isolation. Housed in 6-sided shielded metal case measuring 2.05 x 1.20 x 0.40 in.,...

Read More »
Compact DC Power Supply offers high power and low ripple.

Compact DC Power Supply offers high power and low ripple.

Supplied in 24 x 36 x 74 in. cabinet, High Voltage Switching Mode DC Power Supply offers 1–50 kW adjustable power at levels from 100–240 kW with >0.02% regulation and 1.5 x 10-3% peak-to-peak ripple. Integrated SMPS, which features all solid-state construction, provides 96.9% efficiency and N+1 reliability. Tap water is used for cooling, and unitÂ- and can be located at POL. Other...

Read More »

Three-Phase AC/DC Power Supply delivers up to 3,500/5,000 W.

Intended for 230/480 Vac systems, D2U5T-H3-5000-380-HU3C accommodates 180–264 Vac input for 3,500 W operation and 320–525 Vac for 5,000 W output. Vienna rectifier topology allows 3-wire input without neutral connection, and droop sharing enables N+1 redundancy. Up to 3 supplies may be operated in parallel for total system power of 15,000 W. With U format and 23.1 W/in.Â-³ power density,...

Read More »

SCEPTRE POWER -® Announces Energy Efficiency Level VI Power Supplies

Placentia, CA - Sceptre Power announces the compliance with Energy Efficiency Level VI on its PS, PSD, P2SD, PXX PXT series power supplies. The Energy Efficiency Level VI will go into effect on February 10, 2016, which requires no-load power not to exceed 0.1W for external power supplies ranging from 5W to 40W, and no-load power not to exceed 0.21W for external power supplies ranging from 40W to...

Read More »
DC/DC Power Converters conserve space with slim-profile design.

DC/DC Power Converters conserve space with slim-profile design.

Comprised of EPSITRONÂ-® DC/DC Converters withÂ- 6 mm profile, 787-28xx Series is suited for use when only one power supply will be installed in control cabinet and additional voltage supply is required. UL and GL approvals allow worldwide use in such applications and industries as machinery and plant manufacturing, shipbuilding, and traffic engineering. Features also include jumpering...

Read More »
Surface Mount DC-DC Converters feature low-profile design.

Surface Mount DC-DC Converters feature low-profile design.

Measuring 12.5 x 4.36 x 10.41 mm, NXE2 Series comprises four 2 W models with nominal input voltages of +5 or +12 Vdc and outputs of +5, +12, or +15 Vdc. Input to output isolation of 3 kVdc is standard. Constructed in halogen-free iLGA inspectable package with integrated transformer, converters are suitable for industrial, automation, instrumentation, and transportation equipment as well as...

Read More »
DC-DC Converters avoid critical earth loops.

DC-DC Converters avoid critical earth loops.

Designed for process, transportation, and machinery industries, connectPower PRO DC/DC Converters carry Class I Div 2 and ATEX certification as well as Class III protection. Units offer efficiency of 94%, providing solution for all 24 Vdc power supply applications. From unregulated or distorted input voltage, electrically isolated converters generate stable, low-distortion output voltage. Alarm...

Read More »
TMEIC to Supply New 1500V Solar Ware-® Samurai Inverters for 30MW U.S. Project

TMEIC to Supply New 1500V Solar Ware-® Samurai Inverters for 30MW U.S. Project

ROANOKE, Va.,Â- – Toshiba Mitsubishi-Electric Industrial Systems Corporation (TMEIC) announces its first order of the newest inverters in the Solar WareÂ-® Samurai Series from juwi Inc. juwi's Bison Solar 30MW project in Wellington, Colorado includes 12 units of the Samurai Series 1500Vdc, 2700kW / 2700kVA inverters. The 225-acre site located in Northern Colorado will provide energy...

Read More »

All Topics