New Power Supplies Products

AC/DC Power Supply Modules suit wide range of applications.

Available in 5, 10, 15, 20, and 25 W power ratings, LH series AC/DC power supply modules accept universal 85-264 Vac input and can also accept DC input of 120-370 Vdc. They feature low leakage current, input-to-output isolation of 3,000 Vac, operating temperature range of -25 to +71Ã-

Mobile Power Inverter targets fleet vehicle applications.

Featuring GFCI protection, OSHA-compliant PowerVerterÃ-® Plus PV3000GFCI provides safe 120 V mobile power solution for trucks, lift trucks, fleet vehicles, and other mobile applications. Unit includes two 5-15R and two 5-15/20R outlets, and supplies up to 3,000 W of continuous 120 Vac power from any 12 Vdc source. Housed in lightweight metal case with integrated mounting flanges, inverter...

DC-AC Inverter suits 10-17 in. industrial-grade LCD panels.

Designed for driving cold-cathode fluorescent lamps in LCD back-lighting applications, RoHS-compliant LS6D-1012A-RH provides input of 12 Vdc and output current of 3.3-6 mArms/lamp. Measuring only 7.09 x 1.46 x 0.39 in, device has power output of 5 W/lamp, or 10 W total. Other features included are 1,500 Vrms minimum start-up voltage, 2 A maximum input current and operating and storage temperature...

Rugged Military UPS has high-power, lightweight design.

Supplied in rugged 17 x 19 x 6 in. welded aluminum chassis, Model 5320 features 2,000 VA (1,600 W) continuous output and weighs 50 lb. Nominal input ranges are 85-265 Vac (at rated load) and 70-265 (at half rated load), while 21-33 Vdc input is optionally available. AC input incorporates active power factor correction, and other UPS features include hot swappable redundant design battery pack,...

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

DC/DC Converter features integrated APD current monitor.

With integrated high-side avalanche photodiode current monitor, LT3571 provides better than 10% relative accuracy over -40Ã-

LED Drivers come with complete circuitry and protect LEDs.

Including complete circuitry and inductor in 9 x 15 x 4.32 mm SMT package, LTM8040 DC/DC Ã-µModule(TM) LED drivers can drive from 0-1 A through string of LEDs with Ã-

DC-DC Converters offer 4:1 input, 85% efficiency.

Models AM2GW-Z and AM3GW-Z single- and dual-output, step-down DC-DC converters offer input ranges of 9-36 and 18-75 V with I/O isolation of 1,500 Vdc, within operating temperature range of -40 to +75Ã-ºC. They offer output currents of up to 500 mA delivered to regulated output voltage range of 3.3, 5, 12, and 15 V at up to 85% efficiency. Continuous short circuit protection is included as...

DC-DC Converter combines output disconnect and soft start.

Dual channel 1 MHz, LTC3535 current mode synchronous boost DC/DC converter with 3 x 3 mm DFN-12 footprint is suited for single- or multi-cell alkaline/NiMH as well as Li-Ion/Polymer applications. Unit's internal 550 mA switches deliver output voltages up to 5.25 V from input voltage range of 0.7 V start-up, and 0.5-5 V when running. Burst ModeÃ-® operation lowers quiescent current to 18...

DIN Rail AC/DC Power Supply offers up to 92% efficiency.

Ranging in size from 1.26 x 4.0 x 4.88 in. to 2.36 x 4.60 x 4.88 in., DRS series is comprised of 80, 120, and 240 W single-output models with efficiency levels from 89-92%. Each accommodates universal input range of 85-264 Vac without any input range selectors and accommodate peak load 150% of nominal rating for up to 4 sec max. Series provides output voltage variants of 12, 24, or 48 Vdc, which...

Converter extends battery run time in handheld applications.

Supplied in 16-lead 3 x 5 mm DFN package or SSOP-16, LTC3534 synchronous buck-boost DC/DC converter delivers up to 500 mA output current to regulated output above, below, or equal to input using single inductor. It has 2.4-7 V input and 1.8-7 V output ranges as well as constant 1 MHz switching frequency, and inclusion of 2 N-channel and 2 P-channel MOSFETs deliver 94% efficiency. Burst...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.