New Power Supplies Products

Military Grade Power Converters are offered in AC-DC/DC-DC models.

With ability to provide 28 Vdc output with power ratings from 1,200-1,800 W, Raptor series of power converters are suited for harsh military applications such as shelters, armored vehicles, avionics, and naval. Single and 3-phase input ranges from 88-265 Vac or 125-400 Vdc. Series meet MIL-STD-810D for operating temperature conditions, vibration, and shock, and also MIL-STD ratings for EMI, navy...

DC-DC Power Converter delivers 93.1% efficiency at 5 V.

Featuring wide input voltage of 3-14 V and compact 12.2 x 12.2 mm footprint, 2 A PicoTLynx(TM) point-of-load(POL) DC power converter delivers continuous full load operation at up to 85Ã-

Quarter-Brick DC/DC Converters suit railway applications.

Fully regulated and isolated, CN-A Series offer 60-160 Vdc input, output voltages from 5-24 Vdc (adjustable Ã-

Power Conversion ICs enable 85 mW no-load.

Offered in 16 models, TOPSwitch-JX Series integrates PSU controller and 725 V MOSFET, which deliver 20 mW output power for 100 mW input power in standby mode at 264 Vac. Multi-mode control algorithm maximizes power efficiency across load range, minimizing power wasted during normal operation. Devices are available in eDIP package, which optimizes heat dissipation in slim-form-factor applications...

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

High-Voltage Power Supplies feature miniature design.

Ranging from 0.08-3 in.Ã-³, Microsize/Micropower High-Voltage Power Supplies provide output voltages from 0-100 V through 0-8 kV at 100 mW to 6 W of output power, with current range from 30 Ã-µA to 6 mA. Miniature units offer line and load regulation, programmable output, and output current-limit protection. Some models feature voltage monitoring and performance to 10 ppm. Applications...

VersaLogic Announces SUMIT Support

Mar. 31, 2009 San Jose, California - Mar. 31, 2009 - At the Embedded Systems Conference today, VersaLogic Corp., a Eugene, Oregon-based manufacturer of embedded computer products, announced its support for the new SUMIT(TM) (Stackable Unified Module Interconnect Technology) interface. Per the recently adopted specifications from the Small Form Factor Special Interest Group (SFF-SIG), VersaLogic's...

Mini POL Converters provide up to 39 W output power.

Offering efficiencies up to 93%, DK Series Non-Isolated DC/DC Converters deliver up to 6 A of output current at power densities up to 860 W/cu-in. in SMD package and up to 4 A at power densities up to 760 W/cu-in. in SIP package. RoHS-compliant units operate from 5.6-14.0 Vdc input and provide regulated programmable output voltage from 0.8-6.6 Vdc. All feature remote ON/OFF, over-current and...

DC/DC Converters feature input range of 16-40 Vdc.

Housed in half brick package measuring 2.28 x 2.40 x 0.55 in., 200 W GX series has 2 models with output voltages between 15-24 Vdc, switching frequency of 255 kHz, and MTBF greater than 1M hr. They have trim range between - 40% to +10%, operating temperature range of -40 to +100Ã-

DC/DC Converters come in compact, 24-pin SMT package.

Designed to comply with lead free reflow solder processing according to IPC/JEDEC-J-STD-020C, Tracopower TES5WI Series 5 W DC/DC converters are available in standard models with wide, 4:1 input range of 9-36 or 18-75 Vdc, with single or dual outputs of 3.3, 5, 12, 15, -±5, -±12, or -±15 Vdc. They features I/O isolation of 1,500 Vdc and wide operating temperature of -40 to +71-°C, with no...

Power Control IC provides intelligent POL design.

Supplied in QFN-48 package, UCD9220 dual-output, multi-phase synchronous buck controller can support various point-of-load (POL) configurations. It provides 250 psec of PWM, configurable switching frequency up to 2 MHz, and range of DC conversion ratios while maintaining stable operation. Along with flexible digital power control and phase current balancing, features include...

Optimize Your Storage or Distribution Facility with Steel King Rack Solutions

Steel King racks are designed to meet seismic requirements in the most demanding conditions. Our durable storage products help your company save on maintenance costs. Check out our product video or download our Rack Planning eBook to learn more.