New Power Supplies Products

Midspan offers both 15.4 and 33.6 W ports.

Suited for sites requiring variety of power levels, 24-port Model POE576U-24AFAT provides 8 ports of IEEE 802.3at 33.6 W/port and 16 IEEE 802.3af 15.4 W/port in single 1U chassis. Unit delivers full power of 576 W for 10/100/1000 Base-T and requires no additional power management. Because it is SNMP-capable, midspan enables remote monitoring and camera reset. It includes detection, disconnect,...

DC/DC Converters come in DOSA-compliant SMT packages.

With input range of 2.4-5.5 Vdc, OKAMI(TM) DC/DC Converters include models with 3 and 5 A output current. Non-isolated, point-of-load units each offer choice of positive or negative on/off control and programmable output voltage from 0.75-3.63 Vdc. Housed in 20.8 x 11.9 x 6.2 mm package, RoHS-compliant converters operate from -40 to +85Ã-

DC-AC Inverter drives CCFLs in LCD backlighting applications.

Designed for use with 12-17 in. industrial-grade LCD panels, LS6Q-1612A-RH provides dual LCD panel capability and features brightness/backlight on-off control and 5 V alarm output. It provides input of 12 Vdc and output current of 3.3-6 mA rms per lamp; total power output is 4 W/lamp. Measuring 5.91 x 1.97 x 0.39 in., other specifications include 1,500 Vrms start-up voltage, 2 A max input...

Transducer converts/isolates mV signals from shunt resistors.

Featuring three-way 1.5 kV isolation, MINI Analog Shunt Transducer filters, isolates, and converts mV signal from shunt resistors to standard analog current or voltage signal. Available with 6.2 mm housing and T-Bus power bus capabilities, units can be configured to accept -50 mV to 3 V drops. Hot-swappable signal conditioning slices clip onto powering T-Bus connector without removing bus bars or...

Accelerating Composites Production with Dielectric Cure Monitoring

This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.

Power Supply provides 15 A power to jobsite boxes.

KNAACKÃ-® PowerCrew(TM) in-box power supply features 4 GFCI-protected electrical outlets providing 15 A of power for operating tools and equipment or charging batteries. Standard 3-prong/straight blade extension cord plugs into outside of box. Safety features include internal relay providing open neutral protection, red LED that indicates power is on, and 15 A fuse for current overload...

DC-DC Buck Regulators provide 97% peak efficiency.

Suited for noise-sensitive RF power amplifiers in single-cell Li-Ion battery-powered applications, Series AS1332-34 delivers up to 650 mA from input voltage of 2.7-5.5 V. Fixed switching frequency of 2 MHz, together with internal noise reduction circuitry, results in output voltage ripple of less than 2 mV peak-to-peak. Model AS1332 offers varying output of 1.3-3.16 V, while AS1333 provides fixed...

Step-Down DC/DC Controller operates from -55 to +125-

Housed in thermally enhanced MSOP-10 package, MP-grade Model LTC3824MP features 4-60 V input range and is suited for space-constrained applications that demand output voltage from 0.8 to VIN at up to 5 A. Burst ModeÃ-® operation reduces controller's no load current draw to 40 Ã-µA, while onboard MOSFET gate driver powers external P-channel MOSFET to produce up to 90% power efficiency....

Synchronous Boost Regulator suits USB OTG applications.

Supplied in 2 x 3 mm DFN package, LTC3529 current mode DC/DC converter offers automatic overload fault detection and USB On-The-Go (OTG)-specific protection circuit with programmable fault flag. Internal 1.5 A switches deliver up to 500 mA output current to fixed 5 V output from single-cell Li-Ion battery, and synchronous rectification enables efficiencies of up to 95%. Operating from 1.8-5.25 V...

DC/DC Converters provide up to 12,000 W of power.

C/B5800 Series of DC/DC converters, AC/DC power supply and battery charging products come in 6U or 9U rack module or wall mount module. Offerd in over 100 standard models, 5 standard dc input voltage options span range from 80-800 Vdc. AC input models offer either 1-phase or 3-phase options as well as battery charging models. Single output voltages encompass range from 12-400 Vdc. All outputs are...

Power Supplies meet needs of automation control suites.

Ten model line includes wide range of 24 Vdc models with single and three phase inputs. With output current ranges from 0.75-40 A, if more power is needed multiple units can be connected in parallel for additional current capacity. Other features include overload and overvoltage protection, load regulation to Ã-

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.