Position Sensors / Detectors / Transducers

LVIT Position Sensors target heavy-duty applications.
Position Sensors / Detectors / Transducers

LVIT Position Sensors target heavy-duty applications.

With their modular design, performance, and stroke-to length ratio, LDI-127 Series of contactless LVIT (Linear Variable Inductive Transducer) position sensors meetÂ- needs of in-plant or mobile equipment OEMs. Areas of use include factory automation as well as various industrial and commercial applications, including solar cell positioners, wind turbine prop pitch and...

Read More »
Long-Stroke Position Sensors feature contactless operation.
Position Sensors / Detectors / Transducers

Long-Stroke Position Sensors feature contactless operation.

Based on LVIT (Linear Variable Inductance Transducer) Technology™, LRL-27 Series provides 5 nominal ranges from 10–18 in. Units operate from variety of DC voltages and offer choice of 4 analog outputs. Contactless operation prevents wearout from dither or cycling. Supplied in 1.05 in. diameter anodized aluminum housing that is sealed to IP67, sensors are suited for factory automation systems,...

Read More »
Touchless Variable Gap Sensor is immune to radial and axial play.
Position Sensors / Detectors / Transducers

Touchless Variable Gap Sensor is immune to radial and axial play.

Achieving play-resistant performance on mobile shafts due to circular arc magnet, custom 2-piece magnetic Hall effect variable gap sensor can be custom-engineered to fit existing mechanical assemblies for mission-critical off-road, construction, and marine applications. Stable electrical output and specified linearity is maintained between both sensor packages for over 50 million cycles despite...

Read More »
Angle Sensor performs in extreme environments.
Position Sensors / Detectors / Transducers

Angle Sensor performs in extreme environments.

Providing redundancy for applications requiring fail-safe angle measurement, P2500-M Series includes models with 2 or 3 sections andÂ- offers 3 measuring ranges with angles from 0° to 120°, 0° to 240°, and 0° to 345° with unrestricted continuous rotation. Repeatability is 0.01°, max rotational speed is 2,000 rpm, independent linearity is to...

Read More »
TE Connectivity's Macro Sensors SSIR LVDT Position Transmitters Withstand High Pressure Washdowns and Contaminants of Sawmills
Position Sensors / Detectors / Transducers

TE Connectivity's Macro Sensors SSIR LVDT Position Transmitters Withstand High Pressure Washdowns and Contaminants of Sawmills

TE Connectivity's Macro Sensors SSIR 937 Series Submersible LVDT Position Transmitters are becoming a popular choice for (blade) position measurement applications within sawmills and wood products processing plants due to their high tolerance to water, debris and harsh operating conditions. In addition to performing accurately amid flying sawdust and chunks of wood as well as fluctuating...

Read More »
LVDT Position Transmitter features CANopen interface.
Position Sensors / Detectors / Transducers

LVDT Position Transmitter features CANopen interface.

Equipped with CANopen interface compliant to CiA 443 for subsea instruments, Macro Sensors SSBR-937 Series canÂ- withstand deep sea environments with external pressures up to 5,000 psi and more than 1 million hours MTBF, when encased in special alloys. Sensor offers optimized repeatability, with error less than 0.01% of full range. Device is suited for elongation measurement as part of...

Read More »
Inclination and Tilt Sensors prevent heavy equipment from tipping.
Position Sensors / Detectors / Transducers

Inclination and Tilt Sensors prevent heavy equipment from tipping.

As IP67-rated inclinometers with integrated RS-232 interface and flying lead cable, MTLT series operates from single 9–32 V supply and utilize MEMS sensors, over temperature calibration, and SmartSensing™ technology. Programmable tilt alarms, also included, can be used to lock out controls or trigger alarm or warning light. Respectively, models MTLT105S and MTLT110S are designed for...

Read More »
Position Sensors / Detectors / Transducers

TMR Linear Magnetic Field Sensors exhibit ultra low noise.

Respectively offering 30, 100, and 300 mV/V/Oe sensitivity, TMR9001/TMR9002/TMR9003 series are in-plane Tunneling Magnetoresistance (TMR) linear magnetic field sensors with ultra-low noise spectral density of ~150 pT/√Hz@1 Hz. Each model, supplied in 6 x 5 x 1.5 mm SOP8 package, utilizes push-pull Wheatstone bridge composed ofÂ- 4 TMR sensor elements. Under 1 V applied voltage, power...

Read More »
Spring Loaded LVIT offers optimized length to stroke ratio.
Position Sensors / Detectors / Transducers

Spring Loaded LVIT offers optimized length to stroke ratio.

At 4 in.Â- long, contactless LRS-18 series is available with ranges from 0.5–4.0 in. for dimension or position measuring applications in factory automation as well as various industrial and commercial applications where sensing element cannot be attached to object being measured. Max tip force on item being measured is 1 lb, and 0.75 in. dia aluminum or stainless steel body...

Read More »
Non-Contact Angle Sensor withstands high shock, vibration.
Position Sensors / Detectors / Transducers

Non-Contact Angle Sensor withstands high shock, vibration.

Available in 6 standard measuring ranges with angles from 0° to 60° to 0° to 360° with unrestricted rotation, 70 mm dia RSX-7900 Series offers up to IP69K ingress protection and life expectancy of >100 million movements. Resolution is 12-bit acrossÂ- 4–20 mA output with linearity to ±1% at ≥90°, repeatability is 0.2°, and update rate is 5...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics