Positive Locking Pins offer alternative to detent pins.
QUEST(TM) Series Kwik-Lok(TM) Positive Locking Pins feature 303 stainless steel body and recessed button with polycarbonate resin handle for impact, low temperature, and chemical resistance. Suited for commercial use in OEM and consumer products, units offer nominal pin diameters from 3/16-1 in. or 5-25 mm with -½-6 in. or 10-100 mm grip lengths.
Read More »
Hotwork Ejector Pins are precision ground and laser marked.
Constructed from hotwork die steel, RHX Hard-Core(TM) Series H-13 Ejector Pins are hardened throughout to 50-55 RC and have surface that is ion nitrided to 65-74 Rc. Products, marked for identification, come in 1/32-Â-½ in. dia and 6, 10, and 14 in. lengths as well as +.005 in. oversize and Â-½, 2, 3, and 4 in. shoulder lengths. Diameter tolerances can be held to .0003 in., and pins...
Read More »
Threaded Detent Pins are held by spring force.
Solid alignment pins have ground shank and threaded end for knob handle, and locking balls hold pin in place by spring force. Knob handles can be permanently secured with thread-locking adhesive. Available in stainless steel, products come in standard shank diameters from 3/16-Â-½ in. and various grip lengths. Products require users to push to insert and pull to remove.
Read More »
Locating Pins come in 50,000 size variations.
Suited for OEM applications, Locating Pins are made with hardened A2 tool steel for common industrial usage or in corrosion-resistant 304 stainless steel for machines found in food processing, medical, and pharmaceutical industries. Design engineers can specify all critical dimensions in metric and inch sizes, including head heights, lengths, shanks, and diameters in very fine increments, as well...
Read More »
Side Thrust Pins are available in metric sizes.
By pressing pin body into proper bore size and depth, Side Thrust Pins hold, position, or clamp workpieces. Four versions are available: single sided with stainless steel ball and stainless steel spring, single sided with plastic ball and stainless steel spring, single sided with black oxide finish steel ball and elasticized plastic spring, and double sided with black oxide finish steel ball and...
Read More »
Side Thrust Pins and Bushings come in metric sizes.
Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide...
Read More »
Micro-Serrated Drive Pins enhance workholding capability.
Designed to facilitate hard turning, Neidlein hard-coated drive pins mount around face driver to reduce or eliminate part slippage and scrapped parts. If slippage occurs, pins can be used again. Given proper parameters, products achieve circular run outs of less than 0.002 mm in long production runs. They work with proprietary SB/FSB and FFB face drivers as well as special application face...
Read More »
Press Fit Side Thrust Pins are tapped without pin.
Used in holding, positioning, and clamping of workpieces, Press Fit Side Thrust Assemblies have knurled body with aluminum, gold passivated finish. They require bore of H8 tolerance. While various sized assemblies are available in light-, standard-, or heavy-duty end pressures, all incorporate steel thrust plate hardened with black oxide finish and seals of NBR/perbunan rubber. User can design...
Read More »
Locking Pins feature SS handle and button.
Kwik-Lok(TM) Heavy Duty T & L Handle Pins have solid stainless steel handle and button for corrosion resistance. Standard sizes range from 3/16-1 in. nominal pin diameters. Metric sizes are available from 5-25 mm nominal pin diameters. Welded handle provides impact resistance and ring is included for attachment of optional lanyard. Pins meet or exceed NASM 23460 specifications.
Read More »
Side Thrust Pin features threaded body.
Spring-loaded Side Thrust Pin has elements for holding, positioning, and clamping of workpieces. Protruding height can be adjusted with threaded body. Made of steel, thrust pin is zinc-plated and hardened. Version with seal has yellow finish, while unit without seal has blue passivated finish.
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
