New BP100 Pin Offers Quicker Assembly Time
Manufactured from lightweight, lead free, corrosion resistant aluminum. Designed to retain two plastic components to each other. Offers opposing raised barbs on each end that are angled backwards opposite the direction of insertion.
Read More »
New Rapid Release Pins Offer High Security with its Load Carrying Capacity
GN 314 is available in dimensions with pin diameters from .31 in to .79 in and lengths up to 4.72 in. Retains the single-piece handle and integrates an valuable feature for certain applications such as it can be securely locked. Platforms, stands, projection walls at drive-in cinemas, speaker towers and production systems can be secured against manipulation with these lockable rapid release pins.
Read More »
New Rapid Release Pins Offer High Security with its Load Carrying Capacity
GN 314 is available in dimensions with pin diameters from .31 in to .79 in and lengths up to 4.72 in. Retains the single-piece handle and integrates an valuable feature for certain applications such as it can be securely locked. Platforms, stands, projection walls at drive-in cinemas, speaker towers and production systems can be secured against manipulation with these lockable rapid release pins.
Read More »
New GN 2342 Stainless Steel Assembly Pins Available in Diameters from 8 to 20 mm
Eyelet washer version, having a hole in which a retaining cable or a ball chain can be attached and protects the assembly pin from getting lost. Offers a fastening tab with an elongated hole. GN 2344 series washers are non-detachable and fastened to the assembly pin via their axial countersunk hole.
Read More »
The Evolution of Robot Based Deburring
This white paper provides an overview into the evolution of robot-based deburring.
Read More »
New GN 2342 Stainless Steel Assembly Pins Available in Diameters from 8 to 20 mm
Eyelet washer version, having a hole in which a retaining cable or a ball chain can be attached and protects the assembly pin from getting lost. Offers a fastening tab with an elongated hole. GN 2344 series washers are non-detachable and fastened to the assembly pin via their axial countersunk hole.
Read More »
New Crimp Pins and Receptacles are Ideal for Use in Cable Assembly Connectors
Available in broad range of wire sizes (16-24 AWG) and mating leads (.022 in. - .063 in.) . Precision-machined to exacting tolerances and gold plated for conductivity and durability. Can be used to terminate discrete wires, such as in board-toboard or intra-board connections for power or signal.
Read More »
New Crimp Pins and Receptacles are Ideal for Use in Cable Assembly Connectors
Available in broad range of wire sizes (16-24 AWG) and mating leads (.022 in. - .063 in.) . Precision-machined to exacting tolerances and gold plated for conductivity and durability. Can be used to terminate discrete wires, such as in board-toboard or intra-board connections for power or signal.
Read More »
New GN 616.1 Spring Plungers for Blind Hole Applications
GN 616.1 spring plungers with sealing ring are used for locating as well as for pressure and stand-off functions. Spring plungers with sealing rings last longer since seal prevents liquids and debris from entering internal housing. Nose pin as well as spring are manufactured of European standard No.1.4305 (AISI 303) material and the sealing ring from rubber NBR (Perbunan).
Read More »
New GN 616.1 Spring Plungers for Blind Hole Applications
GN 616.1 spring plungers with sealing ring are used for locating as well as for pressure and stand-off functions. Spring plungers with sealing rings last longer since seal prevents liquids and debris from entering internal housing. Nose pin as well as spring are manufactured of European standard No.1.4305 (AISI 303) material and the sealing ring from rubber NBR (Perbunan).
Read More »
GN 113.10 Ball Lock Pins Ideal for Corrosion-free Applications
Stainless steel rapid release pins have high load capacity. Ideal for fixing, connecting and locking of various parts and workpieces. Lock pins consist of shank knob, push button, plunger pin and spring.
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
