New Pins Products

Receiver Caps increase holding area of ball lock pins.

Sky-Loc Rapid Release Receiver Caps positively lock over end of quick release ball lock pins allowing them to be used in applications where hole is not within tolerance or out of round. Cap increases holding area of pin and provides for maximum pullout strength. Made from 303 stainless steel, caps fit 1/4, 5/16, 3/8, 1/2, and 5/8 in. quick release pins. They come with plain ends as well as with...

U-Bolt Lockbolt installs easily.

Huck-SpinÃ-® lockbolt is available in U-bolt configuration with U-Spin(TM) fastener. Swaged-on, no-torquing installation forms fail-proof clamp, which won't work loose. Equalized clamping force is exerted on each bolt leg, for level-loaded joint. Retorquing is never required. High-speed, precision hydraulic tool is safe, quiet and easy to operate. Manifold simultaneously swages two or four...

Ejectors and Core Pins are hardened for end work.

M-2 Thru-Hardened ejectors and core pins are uniformly hardened to Rc 60-63 and can be ground without loss of Rockwell hardness to permit detailed end work and prevent dishing. Ready for mold insertion, they are offered in decimal diameters and 0.0001 increments. Available in straight and stepped diameters ranging from 0.0312-0.2500 in. with 0.0003 in. tolerance, they come in 6 and 8 in. overall...

Ground Pin and Solid Blades feature crimp ears.

U-shaped ground pin and solid blades are supplied in strip form. They are made from plain- or tin plated-brass, and are used for hospital grade connectors and other critical applications. Crimp ears increase wire attaching speeds. Available in sizes for crimping 18 to 10 ga wire, units eliminate need for soldering process. Blades are UL 1659 certified.

Must-Ask Questions When Choosing a Foam Control Agent

This eBook discusses foam controlling agents and how to find the right one for your needs.

Ejector Pins reduce friction without nicking and flaking.

Royal(R) KNIGHTRIDE(TM) close tolerance hotwork ejector pins are fully hardened throughout to 41 to 45 Rc, and offer ion nitrided surface to 65 to 74 RC for wear resistance. Suited for casting and molding applications, they are precision ground to 5 to 10 RMS surface finish and 0.0003 in. tolerance from H-13 thermal shock resistant hotwork die steel. Heads are hot forged and stress relieved. Pins...

Feeder streamlines SMT pin placement on multiple platforms.

AutoFeeder(TM) supports placement of SMT pins and other interconnects on existing pick-and-place equipment. Primary transport mechanisms and component handling functions are matched directly to existing feeder mounting methodology used by major equipment manufacturers to create seamless interface for each SMT placement platform. AutoFeeder handles continuously reeled components including...

Core Pins are offered in 500 diameters.

M-2 high speed steel core pins are available in every decimal dia from 0.010 to 0.505 in. in 0.001 in. increments, with 0.0002 in. or 0.0003 in. dia tolerances. Double-tempered to Rc 60-63, pins are wear-resistant and permit close spacing without modification. They are available in 2, 2 1/2, 3, 4, 6 and 8 in. lengths and are suited for glass-filled applications.

Locking Pins are used where quick release is needed.

Kwik-Lok pins are available in five handle styles: T, L, button, recessed button and ring. When buttons are depressed, balls at end of grip shaft retract, permitting insertion or removal. Standard sizes range from 3/16 to 1 in. OD in 1/2 to 6 in. grip lengths. Metric sizes are available from 5-25mm OD in 10-100mm grip lengths. All are made of 17-4 PH stainless steel or carbon steel.

Quick Release Pins require no tools.

Sky-Loc Rapid Release positive locking pins will not release until button on handle is depressed so balls retract into pin. Because pins can be removed without tools, they are ideal for quick change-over applications and field work. Pins are available in 17-4 and 304 stainless steel for commercial and industrial applications, respectively. All pins are stocked in four handle configurations with...

Precision Core Pins are for luer taper applications.

Rosspunch pins are precision ground for injection molding of plastic luer taper components. Pins are custom made with tolerances to 0.0005 in. length and 0.0001 in. dia. in steps from 0.006 to 0.750 in. They can be made from all common tool and stainless steels in 0.250 to 10 in. lengths. Pins can incorporate ground ends with radii, flats, symbols and odd shapes. They can also be nitrided, TiN...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.