New Paints Products

Urethane requires only one coat.

High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35Ã-

Coatings rapidly return bridges to service.

Single-coat ExpressTech Fast Clad(TM) Urethane topcoat dries in 30 min. Fast Clad(TM) FD Epoxy is a 2-component, polyamide epoxy that can be applied as high-build coating, providing up to 6-8 mils DFT in single application to marginally prepared surfaces. It is VOC-compliant at 340 g/L. Fast Clad(TM) Zinc primer can be recoated in 2 to 3 hrs. Reinforced film offers resistance to topcoat bubbling,...

Acrylic Paint provides one-coat, high-build finish.

Single-component Fast Clad(TM) HB Acrylic cuts costs in new construction and maintenance projects by eliminating need for two- or three-coat systems. Coating provides 5-8 mils DFT when applied over zinc-rich primers. It can also be applied over other primers and directly to prepared steel. Paint offers early moisture resistance and dries to touch in one hour at 77Ã-

Aerosol Paints suit touch-ups and hard-to-reach places.

Tough CoatÃ-® aerosol paints have fan-shaped spray pattern for maximum coverage. With turn of nozzle insert, EZ TOUCHÃ-® FANSPRAYÃ-® Nozzle pattern goes from vertical to horizontal. High-solids coverage is combined with tough protective coating that resists chipping and peeling. Paints come in Acrylic Alkyd Enamel, Fluorescent, and High-Heat types. They are appropriate for light to...

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Spray Paint allows touch up at anytime.

KrylonÃ-® Interior/Exterior aerosol paint dries to touch in 12 min at 70Ã-

Stainless Steel Paint protects metal.

Duralco(TM) 6105 SP Stainless Steel Paint combines corrosion resistance of 316L stainless steel with 1200 deg F temperature protection. Protective coating cures overnight at room temperature (or air dries in 15 to 30 minutes) to form protective layer of stainless steel. Suitable for protecting metal pipes, stacks, boilers, furnaces, and heat exchangers, paint coats and protects up to 30 square ft...

Powder Coat Paint adheres to steel.

PowderCoatplus(TM) powder coat paint on cold rolled steel is rust resistant, is environmentally sound, and adheres to edges. System involves 3 steps: pretreatment for removing lubricating oils from steel surface, 2 mil thick coating of powder coat enamel applied in automated electrostatic spray booth, and baking finish to hard surface. Paint resists salt spray and impact tests.

Marking Paints work on most surfaces.

Krylon(R) Industrial Quik-Mark Inverted Marking Paints have Spray-Thru(TM) cap and non-clogging spray tip that create bright, highly-visible markings on concrete, pavement, gravel, grass, soil, brick, asphalt, and excavation sites. Also available are APWA solvent-based marking caulks, for temporary markings up to 30 days. They can be removed from hard surfaces with wire brush and water....

Latex Coating paints interior and exterior walls.

Devflex 4205 semi-gloss, waterborne, acrylic latex coating can be applied to properly prepared surfaces including drywall, wood, masonry, and metal surfaces in institutional, commercial and light industrial areas. Low-odor, low-VOC latex dries quickly and cleans up with soap and water. Non-yellowing coating applies by brush, roll or spray. It is available in white and colors.

Fluorescent Paints provide maximum coverage on metal and wood.

Available in orange, red, red/orange and green, Industrial Tough CoatÃ-® I.D. fluorescent paints provide visibility for labeling, coding, and marking of all steel substrates. Paints dry to touch in 15 minutes (77 deg F, 50 relative humidity), allowing for production speed marking. Suitable for identification of inventoried parts, materials, and work-in-progress, paints have high solids...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.