Powder Coatings protect fastener heads.
Fused-On Powder Coatings prevent metal-to-metal contact, provide wear resistance, and protect against rust. Epoxy powder is applied by electrostatic spray or fluidized bed and cured in convection ovens. Nylon 11 and 12 powders are applied by electrostatic spray and cured by post heating induction process. Nylon 11 prevents galvanic corrosion between dissimilar materials, while thick coating of...
Read More »
Reflective Coating is UV-VIS enhanced.
No. 3000-SI Al+SiO2 optical coating is optimized for maximum UV reflectance with greater than 89% reflectance from 250-300 nm, and broadband reflectance of 200-700 nm. Coating survives mil-spec adhesion and temp/humidity cycling and is more durable than conventional UV Al+MgF2 coatings. It is suited for N2 laser use and for analytical applications that require stability and UV-VIS reflectance....
Read More »Transducers and Coating meet governmental/facility edicts.
Oil filled pressure transducers, suited for food and medical extrusion markets, meet FDA requirements 21 CFR 178.3620, 21 CFR 172.878, and 21 CFR 573.680 as well as H1 status from USDA. DyMax(TM) proprietary coating for melt pressure transducer diaphragms adds abrasion resistance without limiting performance. Product does not add to thickness of machined, high-grade stainless steel transducer...
Read More »
Fluoropolymer Linings provide protective coating on ships.
FluoroGrip(TM) linings are made of DuPont TeflonÃ-® and offered in rolls of film offering peel-and-stick installation. They have no VOCs or hazardous solvents, making them safe to apply over various substrates including steel and metals. Linings offer chemical resistance to withstand repeated cleanings. They remain effective over expanding, contracting, and flexing substrates. Applications...
Read More »
Must-Ask Questions When Choosing a Foam Control Agent
This eBook discusses foam controlling agents and how to find the right one for your needs.
Read More »
Floor Resurfacer covers spalled and damaged concrete floors.
POUR-N-WALK(TM) 100% solids, epoxy strength floor resurfacer provides glossy, uniform surface that is virtually impervious to dirt and bacteria. Self-leveling product withstands impact and thermal shock of high traffic. User can mix, pour, and finish with notched squeegee; no topcoat is needed.
Read More »Flooring Systems are flexible, seamless, and waterproof.
Two-component, 100% solids, pigmented, polyurethane-base Soft Floor Systems are suitable for balconies, ramps, locker rooms, hospitals, and skating rinks. Soft Floor 6000 is topped with polyurethane or pigmented Polyurea. It can be applied between 10 and 250 mils in one pass without bubbling due to out gassing. Soft Flake 6001 is broadcast with colored vinyl flakes and top coated with clear...
Read More »
Coating suits high temperature, industrial applications.
Corr-Paint(TM) CP4020 gray-pigmented coating seals and protects steel components and structures in applications up to 1100Ã-
Read More »Coatings are suitable for resurfacing floors and walls.
Based on pure polyurea, Tough-Cote URC, Tough-Cote URM, and Tough-Cote URR are seamless, flexible coatings that offer water- and chemical-resistance. Products are 100% solids, 2-component, pure polyurea elastomers, and can be applied at temperatures from -40 to +350Ã-
Read More »Coating System provides zinc primer, epoxy, and urethane.
Moisture-cured urethane MC 104, with zinc-dust additive, cures by reacting with moisture in air. It is applicable in shop or field by spray or rolling. With high solids content (82%), CM 15 ivory-colored epoxy is suitable for spray applications. It offers some internal flex to allow for substrate expansion/contraction. Gloss white Acrylic Poly 2-part acrylic polyurethane topcoat offers high...
Read More »
Urethane requires only one coat.
High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35Ã-
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
