Handling Equipment

AmeraMex International Receives a $648,000 Rental Equipment Agreement

Second agreement expected for additional equipment increasing the monthly rental to $108,000 per month or $1.3 million for the 12-month period CHICO, CA – AmeraMex International, Inc. (OTC: AMMX), a provider of heavy equipment for logistics companies (stevedoring/shipping), infrastructure construction, logging and mining companies, announced that it has entered into a twelve-month equipment...

Read More »
Wal-Mart Wave Packaged for Cross Country Transport
Packaging Machinery

Wal-Mart Wave Packaged for Cross Country Transport

This past week, Protective Packaging Corporation developed a packaging solution to help ship the Peterbilt-made Wal-Mart WAVE (Wal-Mart Advanced Vehicle Experience) truck. Set to be revealed at a corporate function, the vehicle required a custom solution to keep it clean and fully concealed during transport. To get the WAVE truck across the country on short notice, Peterbilt initially considered...

Read More »
Mr. Shrinkwrap Preserves Ashbridge House
Material Handling and Storage Bags

Mr. Shrinkwrap Preserves Ashbridge House

Exton, PA – Shrink technicians from Mr. ShrinkWrap completed installation of a custom roof cover on the Richard Ashbridge House on October 16, 2013. With the assistance of two 60 foot man lifts and a crane, shrink technicians were able to secure the 300 pound custom reinforced shrink bag to the 3500 Sq. ft. roof. The custom bag covers 100% of the roof and provides an impermeable layer designed...

Read More »
New Technology Takes Water Out of Coal Separation
Process Machinery

New Technology Takes Water Out of Coal Separation

Mineral Separation Technologies Introduces New System COAL CENTER, Pa., -- Mineral Separation Technologies announced today that it has created a new product, the DriJet 100, that separates coal and ash without using water or chemicals. The introduction of the DriJet 100 follows the recent chemical spill on the Elk River in Charleston, West Virginia. A liquid used for separating coal leaked from a...

Read More »
Sponsored

7 Ways RFID Loggers Can Protect Your Cold Chain Products; Product-Tracking Technology Revolutionizes Data Collection

Highlighting that radio frequency identification (RFID) is revolutionizing data collection trend in food and beverage industry, this paper briefs about the role of RFID dataloggers in supply cold chain validation and asset tracking for ensuring food safety. It states that CAS Dataloggers could provide temperature monitoring and alarming solutions for cold chain applications, and adds that product and process safety can be increased by using their RFID products. Also explained in the paper are features of CAS RFID products such as reduced inventory and shipment losses, portable and easy to use, cold chain compliance, and increased vendor reputation. Paper concludes that food processing plants would be the biggest market for their RFID temperature monitoring products, and points that cold chain transparency and validation are the benefits offered by RFID diagnostic products in food safety testing.

Read More »
Stainless Can Seaming Machines for All Requirements
Seaming Equipment

Stainless Can Seaming Machines for All Requirements

Stainless can seaming machines for all requirements LANICO enters the big stage interpack (May 08 to 14, 2014) to present a range of fully stainless can seaming machines. The efficient equipment suitable for a wide range of customer requirements will also be shown in operation to visitors at the booth (Hall 11, booth A41).Â-  The equipment presented at this year's interpack reflects the vast...

Read More »
EVOK® Polystyrene Foam Trays Hit the Market with Exceldor
Miscellaneous Trays

EVOK® Polystyrene Foam Trays Hit the Market with Exceldor

KINGSEY FALLS, QCÂ- — Cascades and Exceldor are pleased to announce that most of Exceldor's line of fresh products is now available in EVOK packaging from Cascades. Made from 25% recycled material, EVOK is the first polystyrene foam food tray (XPS) in North America to contain recycled material and to be found on grocery shelves. Exceldor has been using EVOK products since February 2014....

Read More »
Wall Plug In Changeable Blade
Power Supplies

Wall Plug In Changeable Blade

Wall Plug In Changeable Blade/Tip Power over Ethernet IEEE802.3af PoE Active Injector Midspan provides a single, stock/standard off the shelf, low cost solution for Global PoE enabled product distribution, Model GT-91085-1548 Power over Ethernet (PoE) Active Injector offers a compact and cost effective, fully IEEE 802.3af compliant solution for remote powering of Wireless LAN (WLAN) Access...

Read More »
Epoxy Liner protects chemical transport tanks from corrosion.
Container Liners

Epoxy Liner protects chemical transport tanks from corrosion.

Tested for severe chemical immersion environments, Series 391 Tank Armor consists of 100% solids epoxy liner for use in transport tanks containing chemical blends or acids used in hydraulic fracturing. Applied at 20–40 mils dry film thickness, coating contains no solvents, and is both VOC-compliant and abrasion-resistant. When spray applied in single, high-build coat by plural component...

Read More »
Cans

Greif Receives 2014 Manufacturing Leadership Sustainability Award

DoubleGreen™ COEX" One of Industry's First Sustainable and Stackable Multilayer Jerry Cans with Polyethylene Resin Derived from Sugarcane DELAWARE, OhioÂ- – Greif (NYSE: GEF, GEF.B), a world leader in industrial packaging products and services, has been recognized with the 2014 Manufacturing Leadership Award (ML Award) in Sustainability for its DoubleGreen™ COEX 10-liter plastic jerry...

Read More »
Measuring Equipment

Handheld Irradiance Meter aids in solar panel positioning.

With its internal solar detector and meter, PVM210 helps solar/PV engineers locate most appropriate site to place solar panels. Form factor allows unit to be held in one hand while working on sloping roof or atop ladder. Along with measurement range up to 1,999 W/mÂ-² for solar power readings, unit features 3¾-digit LCD, data hold feature, and accuracy within ±10 W/m²...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics