New Multimeters Products

Digital Multimeters target PCI plug-in applications.

Models SM2060 and SM2064 are 7Ã-½ digit multimeters offering measurement rates up to 1,400 and 20,000 readings/sec, respectively. Model SM2064 features 24,000,000 counts dynamic range, translating to resolutions of 10 nV. Model SM2060 provides 4-wire ohm, frequency, timing, and temperature measurements, while Model SM2064 offers 6-wire ohm measurements and adds extended dc current measurement...

Hand-Held DSO/DMM has 50 Ms/sec sampling rate.

Battery operated Model S2405 provides users with 2-channel, multifunction DSO/DMM with 5 MHz bandwidth and 50 mV to 500 V vertical sensitivity range. Portable scope/meter has DSO section with 8-bit resolution and record length of 512 bytes for single shot/glitch capture and 256 bytes for other modes. As 4,000 count DMM, unit offers built-in auto/manual ranging as well as measurement capabilities....

Digital Multimeter fits in any end-user's pocket.

Featuring safety rating of Category III 300 V, Model PDMM-20 offers autoranging function that provides measurement of voltage and resistance. Non-contact voltage detection identifies live lines without contacting conductors. Low impedance feature eliminates stray or ghost voltage readings. Unit includes intelligent auto-off, low battery indicator, audible continuity test, and 6,000 count LCD...

Digital Multimeter provides accurate readings on noisy equipment.

Model 87V Digital Multimeter incorporates circuitry capable of accurately measuring voltage and frequency on adjustable-speed motor drive systems. Equipped with magnetic hanger and built-in thermometer, product snaps onto steel panels and features white backlight for reading in low-light conditions. Rated for use in 600 V CAT IV and 1,000 V CAT III environments, unit withstands voltage spikes of...

Mitigating Supply Chain Risks for Sheet Metal Components

This ebook provides an overview into mitigating supply chain risks for sheet metal components.

Digital Multimeters are CAT III rated.

Series XP Digital Multimeters feature VolTec(TM) non-contact voltage detectors, ergonomic 155 x 72 mm case, Magne-Grip(TM) holster, integrated tilt-out bail, and 9 V battery. Models 5XP and 15XP provide 1999-count display, 750 Vac/1000 Vdc, 200 mA ac/dc current, 20 megaOhm resistance, Data Hold with min/max, continuity beeper, and battery test. Model 35XP provides 4000-count display, 0.5%...

Digital Clamp Multimeter offers 3 tools in 1.

MetermanÃ-® AC75 incorporates Type-K digital thermometer, 600 A ac clamp, and 4,000-count digital multimeter. It measures up to 600 ac A and 4,000 dc Ã-µA with 0.1 Ã-µA resolution. Unit also provides capacitance measurement up to 4,000 Ã-µF, ac/dc 750 V/1,000 V, and 40 Mohms resistance. It includes continuity beeper, display hold, up to 1.3 in. dia conductor, and CATIII 600 V UL...

Digital Multimeter makes measurements on PCI bus.

Model NI PCI-4070 FlexDMM can operate as 6Ã-½-digit DMM and 1.8 MS/s high-voltage isolated digitizer. It delivers 6 ppm basic 24-hr DC voltage accuracy and sub Ã-µV sensitivity. DC reading rate ranges from 100 S/s at6 Ã-½ digits to 10 kS/s at 4Ã-½ digits. As a digitizer, FlexDMM acquires AC and DC-coupled voltage and current waveforms up to Ã-

Oscilloscope/Multimeter includes RS-232 interface.

MultiScope(TM) Model 381285 combines handheld Graphical Storage Oscilloscope with True RMS Multimeter. Graphical mode display with EL backlighting allows observation of actual voltage waveforms. Multimeter 4,000 count dual display includes analog bargraph. DC to 5 MHz oscilloscope offers sample rate of 25 million samples/sec. MultiScope includes frequency counter, adjustable 5 V square wave...

Multimeter features dual display with 50,000 count accuracy.

Utilizing standard 115 Vac outlet as power source, PC-compatible Model 5491A Bench DMM measures DCV, ACV, DCA, ACA, Frequency, and Diode Continuity. True RMS measurement bandwidth is 30 Hz to 100 KHz. Unit can measure resistance up to 50 Mohm with 10 Mohm resolution, frequency up to 500 KHz with 0.01 Hz resolution, and dBm with variable reference impedance from 2-8,000 ohms. It includes Display...

Digital Multimeters are rated CAT III-600V.

Series 400 consists of 5 models providing AC/DC voltage measurements with 0.1 mV resolution and AC/DC current measurements with 0.1 Ã-µA resolution. Basic Model 410 includes Type K temperature measurements, while Model 411 offers True RMS measurements. Autoranging, True RMS Model 430 adds 4,000 count display with capacitance and frequency measurements. Models 450 and 470 provide non-contact...

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.