Microcontroller drives 168 LCD segments.
Featuring integrated LCD module and nanoWatt technology, Model PIC16F946 is equipped with 14 Kbytes Flash program memory, 336 Bytes RAM, and 256 Bytes data EEPROM. It includes 2 analog comparators, 8 MHz internal oscillator, and 10-bit ADC with up to 8 signal channels. Housed in 64-pin TQFP package, unit supports SPI, I2C, and AUSART communication protocols, and offers Brownout Reset, watchdog...
Read More »Microcontrollers feature nanoWatt technology.
Series PIC18F8622/8527/6622/6527 comprises 8-bit microcontrollers with 10-bit, 100 ksps analog-to-digital converter, 2 synchronous and 2 asynchronous serial ports, and extended battery life through nanoWatt technology and 8 MHz internal oscillator. Units include 48 or 64 Kbytes of Flash Program memory, 4 Kbytes of RAM, 1 Kbyte of EEPROM, 2 USART ports, and 2 I2C(TM) or SPI(TM) serial...
Read More »Microcontrollers target battery-powered applications.
Utilizing very low-power oscillator technology, Series MSP430F20xx delivers 500 nanoamp standby mode and is totally self-clocked with self-wakeup capability using no external components. Digitally controlled oscillator is programmable up to 16 MHz with ability to switch from standby to full operation in less than 1 Ã-µs. Operating from 1.8-3.6 V, microcontrollers enable fire detectors and...
Read More »Remote I/O Block Controller has compact design.
Used in systems requiring rugged remote I/O blocks, A2:M1 suits industrial applications where small package size is required to allow for mounting near hydraulic valves. In addition to CAN (SAE J1939) data link, air-cooled unit features 14 MHz Star 12 microprocessor, 2 analog inputs, and 4 PWM driver 2-wire outputs. Controller is suited for electro-hydraulic systems or machine implement controls.
Read More »
Air Amplifiers and How They Work
Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.
Read More »
Hot Swap Controller has onboard ADC and I2C interface.
Operating from -12 to -100 V supply, -48 V LTC4261 performs power monitoring by measuring card voltages and currents as well as recording past and present fault conditions. Information in ADC's registers can be used to determine if card is using its allocated power or operating abnormally. Product can also turn supply voltage on and off in controlled manner. Inrush and overcurrent limits,...
Read More »Bus Controller suits piping systems with automated valves.
Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to...
Read More »Automation System offers operational flexibility.
Available in Basic, Enhanced, and Advanced versions for respective control over 6, 16, and 40 axes, IndraMotion for Packaging suits food processing and packaging applications. Motion Logic control system delivers real-time motion control combined with IEC 61131-3 compliant PLC, application-specific technology functions, and PLCopen motion function blocks. Off-line simulation and on-line tools...
Read More »Digital Signal Controllers operate from 3.3 V.
Operating at 40 MIPS, dsPIC33 family features microcontroller-centric architecture suited for embedded control. Products have 8-channel DMA, and some versions have two 1.1 Msps ADCs. All units use universal MPLABÃ-® IDE and development tools and have serial I/O subsystems. Provided in 64- to 100-pin packages, products are available with 64-256 KB self-programming Flash and 8-30 KB RAM. DSCs...
Read More »PIC-® Microcontrollers help boost performance and memory.
Manufactured in 64- to 100-pin packages with JTAG, PIC24F and PIC24H series 16-bit PICÃ-® MCUs include 22 general-purpose devices that deliver up to 16 and 40 MIPS performance, respectively. Features include ADC, DMA on PIC24H, 16 KB RAM, and 256 KB Flash program memory. Compatible with universal MPLABÃ-® IDE development-tool platform, PIC24F is 16-channel, 10-bit unit capable of 500...
Read More »GPIB Controller enables portable instrument control.
ExpressCard-GPIB delivers direct control of GPIB instruments from laptop computers with ExpressCard slot, which accepts modules based on USB 2.0 or PCI Express. To communicate with GPIB instruments at transfer rates of up to 8 Mbps, product incorporates TNT GPIB ASIC and Hi-Speed USB chip. Controller interface is transparent to software applications and drivers, and unit comes with NI-488.2 for...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
