L-402 Linear Positioning Stage comes with crossed roller bearings.
Positioners

L-402 Linear Positioning Stage comes with crossed roller bearings.

Used in micromanipulation, test systems, and opto-mechanical alignment automation applications, L-402 Linear Positioning Stage is equipped with direct drive stepper motor or a DC-servo/ gearhead and rotary encoder. Designed with 0.12µm resolution and 0.5µm repeatability, unit offers velocity to 5 mm/sec and has half inch travelling range. L-402 features 22.5 mm wide XY and XYZ stack...

Read More »
New Yorker Electronics Expands on Lighting Division Lineup with New SMD Terminal Block Connectors
Terminal Blocks

New Yorker Electronics Expands on Lighting Division Lineup with New SMD Terminal Block Connectors

Excel Cell EBTL40 Terminal Blocks offer Screwless Terminals and Push-Button Release NORTHVALE, NEW JERSEY, USA – New Yorker Electronics has added the new RoHS-compliant Excel Cell Electronics (ECE) EBTL40 Series of Terminal Block Connectors to its Lighting Division. The ETBL40 Series features SMD terminals with low inserting force cage clamps, push wire-release buttons and a time-saving...

Read More »
EZ-Path® Retrofit Device offers low L rating.
Sleeves

EZ-Path® Retrofit Device offers low L rating.

Featuring smoke-sealing foam, EZ-Path® Retrofit Device offers low L Rating values to minimize smoke leakage. Capable of accommodating bushings snapped or screwed onto ends of sleeves, product permit cables to spill out of sleeve and travel in any direction. Combined with intumescent technology, EZ-Path® converts overfilled cable sleeves in to 100 percent code-compliant sleeves.

Read More »
Anglissimo Elbow Plug Connectors prevent cable clutter.
Connectors

Anglissimo Elbow Plug Connectors prevent cable clutter.

Available in 3 sizes 0B, 1B and 2B series, Anglissimo Elbow Plug Connectors are suitable for medical, industrial control, test and measurement, audio-video and telecommunications. Offering possibility to orientate connector in possible positions, units consist of 2 to 32 electrical contacts and prevent cluttering of cables.

Read More »
Multicyl - The Power Source for Modular Tooling
Presses

Multicyl - The Power Source for Modular Tooling

Multicyl is the best power source in the Industry for unitized or modular tooling such as Unipunch. Simple, cost effective, and requiring only air to operate, Multicyl cylinders have been powering Unipunch hole punching stations for over 30 years. Recently we have expanded our capabilities and at Multicyl we have a full working knowledge of the Unipunch catalogue and now have power solutions for...

Read More »
Hangers

PrimeSET Liner Hanger System comes with hold-down slips.

Featuring anti-preset qualities for reliability and performance, PrimeSET Liner Hanger System can be used in both cemented and open hole applications. Product uses premium sealing technology to seal annulus and secure liner in intermediate casing, balanced piston for prevention of pre-setting during process and torque lock for linear rotation. Hanger system is API V3 qualified and has large...

Read More »
iProAudio Balun™
Baluns

iProAudio Balun™

The possibilities are limited only by your imagination... Needed: Imagination, Smartphone, Cat5e cable, microphone and iProAudio balun ETS has applied its Balanced Line technology to the iProAudio Balun™ mating a professional- grade XLR-style connector with a 3.5mm TRRS plug that plugs into the smartphone or iPad's audio input jack, allowing software on the smartphone to record professional...

Read More »
Miniature Beam Steering, Mirror Positioning Developers' Kits Now Available for Purchase at Digi-Key and Mouser
Positioners

Miniature Beam Steering, Mirror Positioning Developers' Kits Now Available for Purchase at Digi-Key and Mouser

Rotary piezoelectric smart stages with embedded controllers make the system smaller, easier to use than galvo systems Victor, NY - December 20, 2016 - New Scale Technologies’ miniature beam steering kits and mirror positioning kits are available for purchase at Digi-Key and Mouser. The kits feature New Scale’s miniature M3-RS-U Rotary Smart Stage, a piezoelectric stage with embedded...

Read More »
Digi International Announces Immediate Availability of ConnectCore for i.MX6UL Development Kit
Computers

Digi International Announces Immediate Availability of ConnectCore for i.MX6UL Development Kit

Delivers a Complete Pico-ITX Single Board Computer for Creating Industrial Strength Secure, Intelligent Connected Devices and Applications Built on the Smallest Wireless NXP i.MX6UL System-on-Module Platform in the Market MINNETONKA, Minn., Dec. 12, 2016 - Digi International®, (NASDAQ: DGII, www.digi.com), a leading global provider of machine-to-machine (M2M) and Internet of Things (IoT)...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics