Angular Positioning System comes with ETEL torque motor.
Positioners

Angular Positioning System comes with ETEL torque motor.

SRP 5000 Angular Positioning System is equipped with MRP 5000 angle encoder. Compatible with AccurET position controllers, unit comes in 46.3mm height and 124mm diameter. Product is offered in incremental or absolute models. Incremental version comes with encoders of 30,000 signal periods per revolution whereas absolute features 28 bits resolution. System’s motor delivers a peak torque of 2.7...

Read More »
Panel Mount LED CL Indicators come with watertight sealing gasket.
Rectifiers and Diodes

Panel Mount LED CL Indicators come with watertight sealing gasket.

Offered in red, green, yellow, blue and bicolor options, 14mm Panel Mount LED CL Indicators can be configured for voltages up to 60 VDC or 120/240 VAC. Units come in metal housing of M14 size and feature Mil Spec MIL-W22759/33 wire and connector options. 10mm LED CL indicators are equipped with internal resistors and suitable for military, aerospace, forklifts, cranes and transport equipment...

Read More »
CFP8 Connector features pitch of 0.6 mm.
Connectors

CFP8 Connector features pitch of 0.6 mm.

Capable of achieving transmission rate of 400 Gbps, CFP8 Connector’s configurations support 25 Gbps x 16 channels, 50 Gbps x 8 channels, or 100 Gbps x 4 channels. Unit’s kit consists of cage, connector cover, heat sink and clip. Product comes with pin count of 124 pins. Connector comes with clipless mechanism.

Read More »
Multi-Axis Positioning Stages are integrated with linear encoders.
Positioners

Multi-Axis Positioning Stages are integrated with linear encoders.

Available in N-865 and Q-845 models with 2 and 6 Nanometer incremental motion respectively, Multi-Axis Positioning Stages are driven by piezo ceramic motors. Delivering resolution of 0.5 and 1 nm resolution, N-865 and Q-845 can support loads up to 15N and 10 N. Q-845 achieves velocities up to 5 mm/sec. Embedded with software programmable virtual pivot points for alignment processes, units come...

Read More »
NRFit™ Connectors and Caps meet ISO 80369-6 standard.
Caps

NRFit™ Connectors and Caps meet ISO 80369-6 standard.

Designed for neuraxial applications such as spinal and epidural procedures, NRFit™ Connectors and Caps are BPA and latex-free medical-grade acrylic resin. Connectors are available to fit 0.083 in. or 0.122 in. outer diameter tubing whereas caps come with vented and non-vented designs. Suitable for small-bore connecting applications, connectors feature ergonomic wings on the female connectors...

Read More »
Intuition Series Weight Indicators offer plug-and-play setup option.
Scales

Intuition Series Weight Indicators offer plug-and-play setup option.

Consisting of large six-digit LED and LCD displays, Intuition Series Weight Indicators feature seven-function keyboard, digital I/O with four dry relay outputs and two opto-isolated inputs. Designed with weighing and counting modes, communication interfaces, multiple hardware and software options, unit’s ALIBI memory can store up to 100K individual weighing records. Available with CE standards,...

Read More »
Dinkle Remote I/O Series - High Density I/O connection & Fast Wiring
Remote Terminal Units (RTU)

Dinkle Remote I/O Series - High Density I/O connection & Fast Wiring

Dinkle Remote IO series offers 12mm wide compact modularized slot and optional communicated connections (Ethernet/Wire Connection). Dinkle Remote IO has highest density IO connection compared to industrial standards. Users can easily setup the IO system in a limited space in control panel; modularized slot design allows extending the IO connection. Dinkle Remote IO series is designed with PID...

Read More »
PRO-Fit is used for copper and aluminum tubing.
Tool Kits

PRO-Fit is used for copper and aluminum tubing.

Consisting of non-corrosion coated five bell-shaped flaring bits designed for 6, 7.5, 12, 16, 19 mm tubing, PRO-Fit™ Precision Flaring Kit comes in 19 x 28 x 5 cm plastic carrying case with interior foam organizer with cutouts sized to fit respective bits. Featuring ¼ in. diameter hex-shaft and ¼ in. hex chuck, kit is provided with four-color 7.5 x 11 in. instruction sheet.

Read More »
Strobel Energy Group Develops Automated LACT Units for Oil Sector
Measuring Equipment

Strobel Energy Group Develops Automated LACT Units for Oil Sector

CLARKS, Neb., June 13, 2017 - Strobel Energy Group has developed an innovative process unit for use in the energy sector to measure the volumes of liquid products that are transferred to/from assets on their way to market. The LACT (Lease Automatic Custody Transfer) unit measures the net volume and quality of liquid hydrocarbons with a throughput capacity up to approximately 12,000 BPD, providing...

Read More »
XYZ Voice Coil Positioning Stage
Positioners

XYZ Voice Coil Positioning Stage

H2W Technologies designed the VCS20-20-03-MC-01-XYZ as a 3-axis positioning solution where compact size and cost were important. Using voice coil motors, instead of 3-phase brushless linear motors, significantly reduced the overall size, weight, and cost of the system. The VCS20-20-03-MC-01-XYZ is a closed loop voice coil driven XYZ positioning stage. It is ideal for three axis positioning...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics