Liquid Level Meter offers accuracy to -
Suitable for industrial level measurements in liquid control applications, PDCR/PTX 1830 Series offers FS operating ranges from 1 to 900 psi with choice of electrical format. Its 4-wire transducer variant, PDCR 1830, offers FS scale signal of up to 100 mV, while transmitter variant, PTX 1830, is a standard 2-wire, 4 to 20 mA device. Its integral lightning surge arrestor protects against raised...
Read More »
Level Transducer features Modbus-RTU framing format.
Series 510 smart KPSI(TM) hydrostatic level sensor operates at 1,200, 2,400, or 4,800 baud with accuracy of Ã-
Read More »
Liquid Level Sensor solves float travel orientation problems.
Model VLS omni-directional sensor enables motor unit reservoirs to be mounted without regard to float travel. Compensation feature consists of cylindrical float weighted with activating magnet and hollow oval center. Sensor can be pre-fitted inside motor unit reservoir. As liquid level drops, float containing operating magnet moves away from sensor body and signals low level. Stem is made of...
Read More »
Level Transmitter provides accurate liquid measurement.
Ultrasonic LA12 Cricket(TM) 2-wire transmitter mounts through top wall of tank and provides continuous liquid measurement from 0.3 to 10 ft. It has automatic temperature compensation over entire range, NEMA 4X IP65 enclosure with Ã-½ in. conduit connector, 4-20 mA output, and LED power-status indicator. Acoustic wave guide, available in PP, PVC or PVDF, reduces measurement space to Ã-½...
Read More »
The Top 5 Major Benefits of Using Injection-molded EVA Foam for Designing Products
When considering the type of materials to use for an innovative new product, there are many factors to consider, including material quality, design flexibility, production timelines and costs. Suffice it to say that manufacturers need to strike a delicate balance between performance and profitability.
Read More »
Liquid Level Sensor features brass housing.
VS703-51 utilizes Buna N float, and features normally open or normally closed designs. Mounted vertically, it can be fitted internally or externally via compression grommet system, either via top or bottom entry of tank. Maximum switch ratings are 100 Vdc and 250 Vac, and operating temperature range is -30 to 130Ã-
Read More »
Level Sensor offers non-linearity of less than 0.008%.
Level Plus(R) M-Series Digital magnetostrictive level sensor provides digital communication interface for vessels from 18 in. to 60 ft deep. With Modbus output, user can view diagnostic registers that report status of float magnet, digital temperature sensors, volume calculation errors, and low signal trigger levels. Sensor operates in process temperatures from -40 to 257 deg F and outputs...
Read More »
Liquid Level Switches replace float type level devices.
POINTSENSE(TM) LL-10 switches utilize ultrasonic technology and surface mount integral electronics to provide high and low level alarm, pump protection, and auto fill/auto empty operation. They are available in 316SS and Tefzel(R) materials. Electronics provide 6 to 30 Vdc input power with transient reverse polarity protection. Outputs include 2-wire loop power type, relay, and source or sink...
Read More »Jacketed Level Sensor measures 800 chemical products.
LA-H Series, with Metritape resistance-tape technology, converts distance along its length into resistance. Stainless-steel strip sensor has gold contact stripe on face. Strip is wound with gold-plated, nichrome wire to form helix. When liquid contacts sensor's outer envelope, hydrostatic pressure causes helix wire to contact gold contact stripe. Resulting resistance indicates distance from...
Read More »
Level Probe withstands high pressure steam.
Model 7XS high temperature/high pressure steam probe for Eclipse guided wave radar transmitters operates at 605 deg F @ 1,585 psi and withstands corrosive nature of steam applications. It measures levels in saturated steam applications, such as boilers, de-aerators, and feed water heaters.
Read More »
Capacitance Probes offer point level detection.
PRO Series level sensors provide plugged chute detection and process control. Electronic and probe options allow units to fit wide array of powder, solid, and liquid applications. Sensors feature calibration stability, static discharge survival, and RF immunity. They are suitable for hostile industrial applications.
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
