New Lathes Products

CNC Lathe can use oil- or water-based cutting fluid.

Offered with integrated parts unloader, Model JD-1 has fully synchronized spindles that transfer parts on the fly between main and sub-spindles. Unit utilizes pre-engineered gantry loader, cast iron beds with hardened and ground box ways, and double sets of angular contact bearings. Controller includes .00001 in. X and Z offset control capability. Bar capacity is 1.25 in., main and sub-spindle...

Gang-Type Lathe offers 4-axis twin slides.

Model GG5, suitable for high-speed A/B operations, incorporates twin spindles that operate at rates to 8,000 rpm. Travel for X-axis is 3.66 in. per slide, while travel for Z-axis is 6.86 in. per slide. Both axes offer rapid traverse rates of 600 ipm. SR-00 gantry loader has Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. CNC control includes...

CNC Lathe operates at spindle speeds up to 8,000 rpm.

Twin-spindle Model JJ-1 offers AA and AB operation. Gantry loader features Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. Loading/unloading time is 5 sec. CNC control includes .00001 in. X- and Z-offset control capability to allow for finer adjustment of machining tolerances. Spindle motor is 7.5 hp; X- and Z-axis travels are 3.95 and 8.66...

Turning Center offers spindle speed to 6,000 rpm.

Quick Turn (QT) Nexus 100 provides 6 in. chuck, 15-hp motor, and 12-tool drum turret with 0.18 sec. turret indexing time. It is capable of handling heavy-duty cutting at low speeds as well as high-speed turning of nonferrous materials. Programmable NC electric tailstock, driven by servo motor, does not require manual adjustment. Unit's Tool Eye automatic presetting arm automatically performs...

Energy Storage: The Solutions to Power Your Project

Essentra has the technology and expertise to guide you to the perfect energy storage solution. Download our energy storage guide to discover which solution is right for your application.

CNC Lathe includes sub-spindle for increased capacity.

Main spindle of Model JD-3 offers 2 in. diameter bar capacity. Unit's synchronized main and sub-spindles complete both rough and finishing operations, allowing lathe to transfer parts on the fly between spindles. Main and sub-spindle speeds reach 4,000 rpm, with 15 and 5 hp motors. Able to be used in stand-alone situations and integrated into flexible transfer lines, JD-3 incorporates controller...

Lathe provides 30 hp spindle and 3-axis turning.

Storm II 220M features 6 driven tools, 10 in. chuck capacity, 3 in. plus spindle bore, and C axis with integral disk brake. Duo-stable construction makes use of inert composite encapsulated and reinforced with network of ribs, insulating cutting area from uneven temperature gradients and heat dissipation. Lathe includes lights-out capability, delivering 24-hour, unmanned operation, and GE Fanuc B...

Lathe handles long parts.

Model SL-40L Long-Bed Lathe provides max cutting length of 80 in. and max cutting diameter of 25.5 in. It features 15 in. chuck and A2-8 spindle nose that provides bar capacity of 4.0 in. A 40 hp (peak) vector dual-drive system combines with high-torque gearbox to yield 1,400 lb-ft of spindle torque and provides speeds to 2,400 rpm. For large-diameter tubing, Big Bore version is available...

CNC Gang-Type Lathe offers sub-micron accuracy.

Model G05UP holds 1 micron in cylindricity, roundness, and positioning. Built with precision-type integral motor, unit also incorporates built-in active thermal feedback monitoring system and isolated automation package. Equipped with floor type loader, G05UP offers .00001 in. X and Z offset capability. Spindle speeds reach 12,000 rpm, travel for X- and Z-axes is 8.66 in, and traverse rate is 600...

Turning Center offers live tooling and multitask machining.

Hawk-® TC-200M 8 in. CNC Turning Center combines digital vector servo-axis drives, digital Heidenhain X-axis linear scales, and live rotary tooling for round parts processing at -

Turning Center features 45

Digital-featured Hawk-® TC-300 Turning Center offers large thru-hole bar stock capacity of 3.5 in., max turning swing of 26.8 in., turning dia of 16.6 in. and turning length of 39.9 in. Hydraulically actuated 12 in. chuck is powered by single-range, gearless spindle drive. Standard 3000 rpm spindle drive motor delivers full 60 MTDR hp. Digital scale feedback, standard on X-axis, delivers part...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.