Lathes

EMAG at CMTS 2017, Booth 2418!
Chucks and Collets

EMAG at CMTS 2017, Booth 2418!

At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...

Read More »
Mazak to Spotlight Accurate, Affordable Machining Solutions at PMTS 2017
Lathes

Mazak to Spotlight Accurate, Affordable Machining Solutions at PMTS 2017

FLORENCE, Ky., Jan. 23, 2017 - At PMTS 2017, taking place April 25 - 27 in Columbus, Ohio, Mazak will showcase several machining solutions that enable shops to cost effectively achieve huge gains in productivity. In booth 349, the company will feature its new QUICK TURN PRIMOS 100, QUICK TURN UNIVERSAL (QTU) 200MSY and VC 500A5X machine models, each with a different level of CNC control...

Read More »
Vertical Modular Turning Machines - Low Unit Costs Guaranteed!
Machining Centers

Vertical Modular Turning Machines - Low Unit Costs Guaranteed!

Vertical production machines are EMAG's territory. It all began with the VSC series, which laid the foundation for the successful machine concept of the vertical pick-up turning center. This machine concept runs through nearly the entire product range of the manufacturer, and it takes on its latest form in the VL series. VL machines are part of EMAG's modular standard series. As the term...

Read More »
Multitasking Turning Center has direct-drive turret design.
Lathes

Multitasking Turning Center has direct-drive turret design.

To promote productivity, QUICK TURN-250MSY features 12-position, direct-drive turret and MAZATROL SmoothG CNC control. Main turning spindle, which also serves as C-axis programmable in 0.0001° increments; second turning 15 hp, 6,000 rpm spindle with 6 in. chuck; rotary tool milling spindle (10 hp, 6,000 rpm); and Y-axis capabilities allow for single-setup, precision part...

Read More »
Automatic Lathe machines complex, large diameter parts.
Lathes

Automatic Lathe machines complex, large diameter parts.

Featuring rigid machine construction, 10-axis Swiss-type Automatic Lathe handles bar stock up to 1 Â-½ in. in diameter. With B-axis versatility, complex parts can be produced in one operation with precision and accuracy required by critical applications in variety of industries. Proprietary motion control system further optimizes machining operations and significantly minimizes idle machine...

Read More »
Multi-Process Turning Center manufactures complex parts.
Machining Centers

Multi-Process Turning Center manufactures complex parts.

Half turning center, half machining center, Model C1 can manufacture parts with complicated shapes in single chucking operation. System is engineered with triple stack turret with tool changer and can hold up to 36 tools. Machine features 28.74 in. swing over bed diameter, max cutting diameter of 20.88 in., max cutting length of 23.58 in., and max spindle speed of 6,000 rpm. Designed to minimize...

Read More »
Milling Center handles workpieces up to 2,500 mm diameter.
Milling Machines

Milling Center handles workpieces up to 2,500 mm diameter.

Featuring bridge design with moving table and crossbeam, 5-axis Umill 1800 permits loading from top or front of machine. Portal-style system has working range of 2,150 mm on Y axis, 1,800 mm on X axis, and 1,250 mm in Z axis. Table can be dedicated to milling with rotation speed of 10 rpm and load capacity of 10 tons, or turning with speeds up to 250 rpm and load capacity of 5 tons. Rapid...

Read More »
Milling Machines

DMI Event to Highlight Mazak Innovations that Boost Job Shop Efficiency

FLORENCE, Ky.,Â- – Mazak distributor Dependable Machine Inc. (DMI) will host an open house at its new technology center in Hayden, Idaho, May 10-12 from 10:00 a.m. – 4:00 p.m. (PDT). The event will feature Mazak technologies that simplify part production processes as well as enhance shop floor productivity and versatility. A must-see for attendees will be Mazak’s MAZATROL SmoothX CNC....

Read More »
VERICUT Helps Grade Turning and Milling SkillsUSA/NIMS Contest Submissions
Milling Machines

VERICUT Helps Grade Turning and Milling SkillsUSA/NIMS Contest Submissions

Irvine, CAÂ- - CGTech will be on hand at the National Leadership and Skills Conference (NLSC), June 21-23, 2016, to help grade multiple SkillsUSA/NIMS events related to Computer Numeric Control (CNC) machining. CGTech will also be exhibiting its latest version of VERICUT software in Booth S149. More than 16,000 people - including students, teachers and business partners -...

Read More »
Machining Centers

National Bronze Mfg. Co. Expands Machining Capacity

Roseville, MIÂ- – National Bronze Mfg. Co., a leading manufacturer of bronze bushings, bearings, and machined components, is pleased to announce the acquisition of a state of the art Okuma CNC Turning Center. The high performance machinery combines pin point accuracy with state of the art automation technology to give National Bronze Mfg. a competitive advantage. The new...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers