New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »Ultra-High Shear Mixer with Powder Injection Technology
Hauppauge, NY — The Ross PreMax is a batch-style rotor/stator mixer designed for ultra-high shear conditions and vigorous flow, an ideal combination that supports high-speed production of fine dispersions and emulsions. Its patented Delta mixing head runs up to 5,000 ft/min and produces a double vortex that pulls product from the top and bottom of the rotor while simultaneously expelling...
Read More »Ultra-High Shear Homogenization and Particle Disintegration
Hauppauge, NY – The Ross MegaShear Ultra-High Shear Mixer is designed for homogenizing dispersions and disintegrating large solid particles or droplets suspended in liquid. A unique inline rotor/stator design, the MegaShear's mixing head (US Patent No. 6,241,472) turns at tip speeds well over 11,000 ft/min and generates extremely complex flow patterns without sacrificing throughput. This...
Read More »Planetary Disperser features 10 gallon capacity.
Combining dual-bladed disperser with helical planetary stirrer, PowerMix Model PDM-10 disperses powders, fibers, or other solids into liquid. As material thickens, combined mixing power of agitators can continue to apply high levels of shear even after product has reached viscous, non-flowing state. Vacuum-rated mixer features portable mix vessel, air/oil hydraulic lift to raise/lower agitators,...
Read More »Troubleshooting Guide: What Your Cranes Wish You Knew
Your guide to crane troubleshooting
Read More »Homogenization Tester evaluates in-line process feasibility.
Suited for manufacturers of dispersions, emulsions, and slurries, Sanitary Homogenization Test Laboratory evaluates particle size reduction and de-agglomeration manufacturing processes. System utilizes dynamic in-line mixer or high shear colloid mill featuring rotor-stator mixing technology that exposes 100% of product to same shear action, with no bypass. Comprehensive test report with...
Read More »In-Line Mixer facilitates powder induction in liquid stream.
Suited for rapid introduction of difficult to wet solids, In-Line SLIM Solid-Liquid-Injection-Manifold System combines mixing of powders and liquids simultaneously by injecting powders directly into high-shear rotor/stator mixer, where powder is immediately dispersed into liquid stream. System includes progressive spiral porting, which enables it to operate without pump or eductor, providing...
Read More »Marion Mixers Is Exhibiting a Cost-Saving Mixer at SE Powder Show in Atlanta
Marion Mixers will be exhibiting its custom designed horizontal batch mixer with adjustable paddle blades at the SE Powder show in Atlanta April 28th-30th. This mixer is ideal for any powder bulk application. It mixes and disperses in one operation, which means higher production volume by combining process functions for faster mixing. The combination of the optional chopper motor and the unique...
Read More »Sanitary Mixing Systems suit batch or continuous operation.
Designed to meet needs of each user, Sanitary Mixing and Dispersion Systems typically include 316 stainless steel construction, polished to 17RA finish and multiple mix vessels designed for 10 psig/full vacuum operation. Vessel and mixer sizes are available from fractional to 250 hp. Additional features include high shear and low-speed agitators, touch screen control systems, rupture discs, flow...
Read More »Rotary Agitators can be used as liquid-liquid extractors.
Designed to operate in end-over-end fashion, P/N 3704-6SFA and P/N 3740-12SFA are capable of holding 6, 2 L and 12, 2 L separatory funnels, respectively, and also allow for separatory funnel bottles to be vented. They can operate at 30 rmp Ã-
Read More »Emulsifiers utilize submicron size reduction technology.
QuadroÃ-® HV-Emulsifier Series features 3 different models ranging from 20-125 hp depending on desired capacity, up to maximum of 250 gpm. All models utilize energy optimized tooling that operates at tip speeds up to 60 m/sec with low power consumption. Sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft for optimal CIP results. Various other equipment...
Read More »High or Low Volume Custom Crates and Boxes Available from Reid Packaging
Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.
Read More »