Impeller / Propeller / Turbine - Agitators / Mixers

Impeller / Propeller / Turbine - Agitators / Mixers

Quadro Enters Partnership with Guelph Food Technology Centre

Quadro is proud to announce a new partnership with the Guelph, Ontario-based Guelph Food Technology Centre (GFTC) to put three new pieces of pilot-scale equipment at the disposal of the Centre. "Developing a successful new food product is a risky venture, and carrying out experiments at a pilot-level scale can be a great savings in time, ingredients and frustration", explains Allen Mannen, GFTC's...

Read More »
Portable Mixer features all-stainless steel construction.
Impeller / Propeller / Turbine - Agitators / Mixers

Portable Mixer features all-stainless steel construction.

USDA-approved Sharpe Portable Mixer comes in electric and air-operated models available with fractional through 2 hp motors. While it can be supplied with options tailored to process requirements, unit comes standard with Â-¾, 1, and 1¼ in. shafts in lengths up to 8 ft. Product is suitable for mixing liquids in 50-5,000 gal range, creating high flow with low shear. Along with 4-16...

Read More »
Bottle Mixer provides rocking and rolling action.
Impeller / Propeller / Turbine - Agitators / Mixers

Bottle Mixer provides rocking and rolling action.

Featuring 10 removable rollers to accommodate large bottles, Stuart SRT2 provides continuous operation and is suitable for mixing blood samples, viscous substances, and liquid-solid suspensions. Plastic rollers rotate at 33 rpm and rise and fall 16 mm. Equipped with stainless steel drip tray, mixer offers 22 lb load capacity and operates on 120 V/60 Hz. It can be used in incubators up to...

Read More »
Roller Mixer is suitable for mixing blood samples.
Impeller / Propeller / Turbine - Agitators / Mixers

Roller Mixer is suitable for mixing blood samples.

SRT1 Roller Mixer features 5 rollers that rotate at 33 rpm and rise and fall 16 mm. Rollers are 340 x 30 mm and can load 22 lb maximum. Units can be used in incubators up to 60Â-ºC, humidity to 80%, or in cold rooms down to 4ºC. Suited for mixing viscous substances and liquid-solid suspensions where minimum aeration is required. Stainless steel drip tray collects accidental...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Hygienic Mixing System offers aeration-free performance.

Available in single- and multi-stage units, 3A-certified Silverson In-Line Mixers are suited for use in chemical, pharmaceutical, cosmetic, food, petrochemical, and adhesives industries. Mixers incorporate rotor/stator workhead with capability to mix, emulsify, homogenize, solubilize, suspend, disperse, and disintegrate solids, and configuration does not allow product to bypass mixing zone.

Read More »
Mixer enables mixing of ultra-high viscosity formulations.
Impeller / Propeller / Turbine - Agitators / Mixers

Mixer enables mixing of ultra-high viscosity formulations.

Double planetary mixer, model DPM, incorporates Teflon® coated HV blade that is capable of mixing products up to 8,000,000 cps and assists in rapid incorporation of light and difficult to wet solids such as fumed silica. Blade design cleans walls and bottom of vessel and eliminates climbing of viscous materials during mix cycle. Mixer is available in sizes from Â-½ pint through 750 gal...

Read More »
Dynamic In-Line Mixer Features Hi-Shear Action Mixing Head
Impeller / Propeller / Turbine - Agitators / Mixers

Dynamic In-Line Mixer Features Hi-Shear Action Mixing Head

A compact, dynamic in-line mixer that features a patented mixing head with up to 12 shear action zones" which can produce shear rates of 200,000/sec. each is available from Bematek Systems, Inc. of Beverly, Massachusetts. The Bematek LZ Series Sanitary Dynamic In-Line Mixer can perform particle size reduction, deagglomeration, blending, and homogenization to customer requirements with output down...

Read More »
Top Entry Mixers suit mid-range fluid mixing applications.
Impeller / Propeller / Turbine - Agitators / Mixers

Top Entry Mixers suit mid-range fluid mixing applications.

Offered in size variety for continuous or batch mixing, QED Plus(TM) series handles blending, solids suspension, and high-viscosity applications. It features leak-proof drywell design and minimum 30,000 hr L10 bearing life. Tapered shaft engagement system facilitates disassembly and provides secure, true-running connection between shaft and drive. Along with right angle gear drive, series is...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers