Impeller / Propeller / Turbine - Agitators / Mixers

Impeller / Propeller / Turbine - Agitators / Mixers

New Liquids Technology Available at Process Expo 2009 in Las Vegas

QUADRO ENGINEERING CORP./WRIGHT FLOW TECHNOLOGIES - BOOTH NO.: 6728, will be showcasing their full range of liquids processing solutions at Process Expo 2009, in the Las Vegas Convention Center (October 5 - 7, 2009). Quadro Engineering Corp. will feature the HV-Emulsifier Series, an innovative rotor-stator mixing device that defines new limits in shear energy and closes the gap in performance...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Solids Processing Solutions Available at Process Expo 2009 in Las Vegas

QUADRO ENGINEERING CORP. - BOOTH NO.: 7407, will be showcasing a range of their solids processing equipment at Process Expo 2009, in the Las Vegas Convention Center (October 5 - 7, 2009). For laboratory, research and development work, Quadro will be featuring the Quadro® Comil® U5 lab model. Quadro's versatile laboratory lines allow scalable repeatability, emit low heat and dust,...

Read More »
In-Line Wet Mixer Cleans Easily & Minimizes Waste
Impeller / Propeller / Turbine - Agitators / Mixers

In-Line Wet Mixer Cleans Easily & Minimizes Waste

A high-speed, easy-to-clean, in-line mixer that rapidly disperses materials in liquids to enhance a products's stability, viscosity, tecture, color, or flavor is available from Bematek Systems, Inc. of Salem, MA. Bematek In-Line Mixer systems feature their high-speed mixer, which passes the entire slurry through a high-shear mixing head for continuous in-line processing or recirculation through a...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Sanitary Mixers feature modular assembly design.

Available in portable and fixed mount models, Nettco S-Series offers clamp style, open tank, or sealed mounting configurations and can be converted from one mounting arrangement to another in 2 minutes. Direct drive and gear options provide full range of shaft speeds. Featuring welded construction, stainless steel mixers are 3A authorized, CE compliant, and global-ready. Units are suited for...

Read More »
Continental Manufactures World's Largest Rotary Drum Batch Mixer
Impeller / Propeller / Turbine - Agitators / Mixers

Continental Manufactures World's Largest Rotary Drum Batch Mixer

Continental Products Corp. has manufactured the world's largest rotary drum batch mixer. Continental Rollo-Mixer ® Model No. 132-1286/50s was shipped from Wisconsin at the end of August 2007 to the port of Houston. This massive batch mixer rotates at only 2 rpm and will uniformly blend 65,000 lb. batches of friable, cube-like particles in 3 minutes. The rotary drum batch mixer was constructed...

Read More »
In-Line Wet Mixer processes all product without bypass.
Impeller / Propeller / Turbine - Agitators / Mixers

In-Line Wet Mixer processes all product without bypass.

Configurable to match user viscosity requirements, In-Line Wet Mixer features modular shear-action mixing head, which forces all product through several stages of high-speed rotors and stators to achieve consistent and repeatable finished product. Assuring total particle size reduction and homogenization, stainless steel mixer can handle viscosities from 100 cps and up with flow rates from...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

The Solution to Your Dairy Mixing Challenges

Mixing of powders into liquid can pose a challenge in dairy processing, i.e. long batch times, poor mixing/ lumpy product, excessive foaming and cleaning difficulties. Not all blenders and mixers are created equal. The Quadro Ytron® XC Powder Disperser is designed to incorporate and disperse large quantities of powders into a liquid stream with minimal air entrainment. Processing at ambient...

Read More »
Potable Water Tank Mixer is solar powered.
Impeller / Propeller / Turbine - Agitators / Mixers

Potable Water Tank Mixer is solar powered.

Model SB400 floating mixer creates near-laminar flow to completely mix small potable-water tanks up to 300,000 gal, eliminating thermal stratification and stagnation and providing uniform water age. It utilizes permanent magnet, low-voltage motor and on-board battery system for continuous operation. Certified by NSF against potable water contamination, mixer is equipped with chemical injection...

Read More »
High Shear Mixer eliminates need for inline recirculation.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer eliminates need for inline recirculation.

Combining high flow rates of up to 500 gpm without auxiliary pump, high tip speeds up to 18,000 fpm, and ultra-high shear rates, MegaShear Inline high shear mixer disintegrates large particles and droplets in single pass. It operates with one pass through rotor/stator and produces uniform particle/droplet size distribution. Applications include fine emulsions and dispersions, pharmaceuticals, and...

Read More »
Rotary Drum Batch Mixer quickly produces uniform blends.
Impeller / Propeller / Turbine - Agitators / Mixers

Rotary Drum Batch Mixer quickly produces uniform blends.

Employing rotary drum mixing technology, Rollo-Mixer® Mk 8 is designed for uniformly blending dry particulates within 2-3 min. It creates rivers of material that gently divide and combine batch several times per revolution, resulting in gentle and homogeneous blending. Also, instantaneous discharge capability allows entire batch to empty completely within seconds. Areas of use include food,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers