Screwdriver Spindle features inline torque sensor.
SIZE-1 Screwdriver Spindle includes torque transducer based on strain-gauge technology, which obtains torque values by measuring reaction torque of gearing. Transducer connection is integrated with guide bolt above drivers' mounting area, providing access and protecting against damage. Minimum torque for spindle is 0.34 lb-in. and precision level of transducer is less than 1% standard deviation.
Read More »
In-Line Rotary Torque Sensors offer 16-bit resolution.
Suited for automotive powertrain dynamometers, TORKDISCÃ-® Series 5300 features on-board electronic module that converts torque signals into high-speed digital representation. Digital data is transmitted to non-contacting pick-up loop with no risk of noise or data corruption. Remote receiver converts digital data to analog output voltage, frequency output, and serial digital output. Units...
Read More »Rotary Socket Sensor features 1,024 ppr optical encoder.
With capacities from 50-2,400 lb-in., Square Drive Rotary Socket Sensor allows engineers to check nut runners for torque and angle accuracy and insure proper fastening techniques. Sensor is compatible with commercial DAQ systems using in-line miniature amplifier, or as self-contained system using PTI PMAC 2000 or USB Sensor Link.
Read More »
Small-Capacity Sensors measure torque down to 5 lb-in.
Flange-mounted Series 2308, 2309, and 2508 strain-gage reaction torque sensors are supplied with shunt calibration resistor and are NIST traceable. Featuring 2 mV/V output sensitivity, products are available in capacities from 5-1,000 lb-in. FS for measuring torque in applications such as lubricant studies, torsion testing, bearing friction, small motor dynamometers, stepping switch torque, and...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »Transducer resists lateral forces.
Suited for synchronous force and displacement measurements, U3 force transducer resists lateral forces and bending moments caused by weight of any connected machine parts that can lead to measurement errors. Lateral forces up to 100% of nominal rated force can be absorbed by welding supporting membrane parallel to measuring element through outer ring. Compact product, available in 8 measuring...
Read More »
Foot Plates aid in rehabilitation of foot and leg.
Instrumentation grade Type 9281 and 9287B force plates incorporate piezoelectric force sensors with quartz crystals that convert force into data signal. Designed into foot tracks that don't reveal instrumentation beneath, patient steps, walks, or runs as instructed on outlined zone. Graduated force patterns visually represent physical condition, and impressions are captured for gait in motion...
Read More »
Miniature Force Transducers cover 50 N to 50 kN ranges.
Series C9B measures pure compressive forces, while Series U9B measures tensile and compressive forces. Both ensure precise measurement of small forces in hostile industrial environments. Available with welded bottom cover or tensile force adapters, units are hermetically sealed and fitted with diaphragm measuring body. They are suited for monitoring assembly processes or for use in testing...
Read More »Torque Sensor has 5,000 Hz sample rate.
Rated up to 20,000 rpm, rotating torque sensor features digital, infrared transmission system and 16 bits of resolution. In-line, non-contact unit, offered in various torque capacities and configurations, also features complete signal conditioning that is compatible with commercial dynamometer controllers.
Read More »
Torque Sensor has maintenance-free design.
Series 4200 utilizes non-contact, rotary transformers for sending excitation voltage to, and receiving measurement signals from, rotating strain gage sensor. Shaft-end, temperature-compensated product features 2 mV/V output sensitivity and integral shunt calibration network. Offered with capacities from 100-100,000 lb-in. FS and max speeds to 10,000 rpm, series is suited for use in torque studies...
Read More »
Miniature Force Sensors suit limited space applications.
Designed for use in tension and compression testing, Series SJR measures 0.7 x 0.3 x 0.75 in. and features threaded holes for mounting of attachments or implements. Miniature S-beam type force sensors have built-in mechanical overload protection for up to 1,000% of full capacity and are accurate to Ã-
Read More »
General Pipe Cleaners Presents Lightweight, Powerful JM-1000 Mini-Jet
The lightweight, compact JM-1000 Mini-Jet clears grease, sand, and ice with a high pressure water jet.
Read More »
