Torque Sensors measure in both directions.
Model 2133 Series measures static torque in clockwise or counterclockwise directions. Models cover torque ranges from 10 to 1000 lb-ft in 7 different rated capacities, with Ã-¼ to 1 in square drive size configurations. Each unit is temperature compensated from 70 to 170Ã-
Read More »
Force Tranducer is shock and vibration qualified.
Force Transducer is available with internally gaged, force sensing clevis pins and instrumentation packages in shock-qualified configurations to MIL-901D specifications. Similar clevis pin designs, incorporating internal 4-20 mA amplifiers, have also been qualified for specific vibration environments. Internal gaging is environmentally protected.
Read More »
Torque Transducer runs at speeds up to 6,000 rpm.
Model TMB is available in versions from 1 to 500 Nm nominal torque, all with accuracy of 0.2%. It has non-contact differential transformer for reliability and stability, maintenance-free operation, and electrical noise immunity. All models have electronic conditioning with open collector speed outputs and torque signal of +/- 5 Vdc. Optional Model 6400 Display provides excitation to torque...
Read More »
Force Link measures 3 components of force.
Type 9317 triaxial force link contains quartz force elements preloaded between 2 steel mounting flanges, enabling assembly to measure both compressive and tensile forces. They measure 3 orthogonal components (Fx, Fy, Fz) of dynamic or quasi-static force acting upon sensor cell. Fz measuring range is +/- 450 lbf. Fx and Fy measuring range is +/- 220 lbf, with threshold level of 0.002 lbf. Assembly...
Read More »Importance of Motor & Generator Maintenance & Repair in the Mining Industry
Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.
Read More »Pulley Torque Sensor measures during operation.
Model 01286 Pulley Torque Sensor consists of sensing element and slip ring assembly. It measures belt- or chain-drive torque, while allowing motor to be used in normal operation, such as test stand and on-vehicle.
Read More »
Torque Transducer mounts in-line to SAE or Metric flanges.
Non-contact, rotary Model RTC sensor transmits torque signal to RF receiver, delivering output of 0 to 10 V, proportional to torque, or optional 4 to 20 mA output. Operating range is 1,500 to 170,000 in.-lb, with running speeds up to 15,000 rpm, depending on range. RF telemetry package is induction-powered by stationary loop antenna coupled to power supply and receiver. Transmitter may be...
Read More »
Torque Sensor communicates directly with PCs and laptops.
DAQ F/T 6-axis, force/torque transducer system includes transducer, interface board, power supply, data acquisition device, and software tools. Interface board on or near transducer produces 7-channel signal that can be read by most analog input data acquisition cards. Software has Windows ActiveX component that configures transducer system and converts raw voltages into force and torque.
Read More »
Transducer Simulator utilizes wire-wound resistors.
Model TS simulates millivolt-per-volt output of unamplified strain gauge transducer. Input resistance is field-selectable to 350 or 5000 ohms. Output is selectable in 5 ranges of 0.5, 1, 2, 5, and 10 mV/V, and each can be adjusted in 10% steps to simulate output of various transducers. Portable unit is enclosed in weatherproof aluminum case and needs no power supply. It draws its excitation...
Read More »
Torque Tranducers have capacities from 0.1 to 1500 Nm.
Model 1700 Series Rotary Torque Transducers are available with optional encoder for angle measurement or rpm option for speed monitoring. Body lengths vary from 62 to 84 mm. Contactless transmission of supply voltage and measuring signal enables continuous operation with low maintenance. They offer built-in instrumentation amplifier with +/-10 Vdc output, 100% mechanical overload protection, and...
Read More »
Combination System provides weight and force measurement.
GS0/DPM-3 System is comprised of GS0 precision gram sensor and DPM-3 panel mount meter. It is suitable for variety of industrial and OEM force measurement and weighing applications. DPM-3 can be scaled to full 5 digits, samples 60 readings per second, provides analog output and features true peak reading capability. GS0 tension and compression sensor is offered in variety of ranges from 10 to...
Read More »
Clear Clogged Drains Faster with General Pipe Cleaners' Kinetic Water Ram
The Kinetic Water Ram by General Pipe Cleaners clears out clogged pipes quickly using kinetic energy. The Ram is so simple to operate, anyone can use it. Check out the video to learn more.
Read More »
