Feeders and Feed Systems

Feeder System eliminates tray replenishment time.

Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.

Read More »
Cartridge Feed Systems handle highly viscous materials.
Feeders and Feed Systems

Cartridge Feed Systems handle highly viscous materials.

Dispensit® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point...

Read More »
Chemical Feed Systems are custom built for CPI applications.
Materials Feeders

Chemical Feed Systems are custom built for CPI applications.

Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...

Read More »
Wire Feeding Guns minimize friction in line.
Materials Feeders

Wire Feeding Guns minimize friction in line.

Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Wire Feeder is both rugged and portable.
Materials Feeders

Wire Feeder is both rugged and portable.

LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...

Read More »
Chemical Feed Systems suit wide range of applications.
Materials Feeders

Chemical Feed Systems suit wide range of applications.

Custom systems can be designed to include any metering pumps, tanks, portable mixers and control panels, along with instruments and piping specialties. Units are fully piped, wired, and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. They offer feed rates from 0.02 to 300 gph at...

Read More »
Loose Pouch Feeder provides accurate inserting and counting.
Parts Feeders

Loose Pouch Feeder provides accurate inserting and counting.

Model OT handles loose bulk quantities of filled pouches of product, both counting and inserting pouches into containers at same time. It accommodates filled pouches in sizes from 1/4 x 1/2 in. to 4 x 6 in. Unit can be customized to feed from 1 to 20 lanes, with per lane feed rate up to 150/min. Model OT can be attached to cartoners, baggers, bucket conveyors, and tray thermoformers.

Read More »
Modular Infeed System places labels with accuracy to .005 in.
Parts Feeders

Modular Infeed System places labels with accuracy to .005 in.

Modular Infeed System can be added at infeed of existing folder gluers to feed, transport, and position carton blanks. It offers exact placement with infinitely variable pitch. Elimination of top carrier belts creates open design to scan entire blanks for bar codes, windows, or print defects. System includes computer sequenced carton feed (independent of belt speed), live side guide, and cammed...

Read More »
Vibratory Feeders suit lightweight powders and leafy products.
Feeders and Feed Systems

Vibratory Feeders suit lightweight powders and leafy products.

HD Series High Deflection Vibratory Feeders combine high deflection (3/16 in.) and low frequency (30 cps) with precise control of electromagnetic vibratory feeder. Available in 5 models and 16 sizes, feed rates up to 80 ft/min are possible for products with bulk densities less than 10 lb/ftÂ-³. Feeders include variable speed control housed in M Type (NEMA 12) enclosure, AC electromagnetic...

Read More »
Vibrating Feeders keep bulk materials flowing.
Feeders and Feed Systems

Vibrating Feeders keep bulk materials flowing.

Volumatic Feeder Machines have dual vibratory action to ensure proper flow and measured discharge of dry materials. Assemblies include hoppers, bin vibrators, feeders, and controls that handle feed rates from a few pounds to 15 tons/hr. Feeders can be used with weigh scales, packaging and bagging equipment, small batch operations, and continuous or intermittent additive feeding. Multiple...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics