Wire Feeder Cabinet utilizes push-pull wire technology.
Materials Feeders

Wire Feeder Cabinet utilizes push-pull wire technology.

Cobramatic® includes wire retainer, which has spool drag tension and wire leveling on spool to prevent tangling or damage to wire. Unit also includes 1-lever wire selector, which provides precise tension and wire feed (regardless of material), and PosaStart(TM) adjustable circuit for smooth starts when used with constant current DC power supplies. Gas purge kit is located in unit, as...

Read More »
Wire Feeder features crush-proof case.
Materials Feeders

Wire Feeder features crush-proof case.

SuitCase 12VS(TM) voltage-sensing portable wire feeder operates on open-circuit arc voltage. It permits flux cored welding with constant current power sources and MIG and flux cored welding with constant voltage power sources. It holds wire spools up to 12 in. and runs .023 to 5/64 in. diameter wire at speeds of 50 to 700 ipm. Injection molded, flame-retardant case has tight seal that protects...

Read More »
Feeders and Feed Systems

Feeder System eliminates tray replenishment time.

Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.

Read More »
Cartridge Feed Systems handle highly viscous materials.
Feeders and Feed Systems

Cartridge Feed Systems handle highly viscous materials.

Dispensit® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point...

Read More »
Chemical Feed Systems are custom built for CPI applications.
Materials Feeders

Chemical Feed Systems are custom built for CPI applications.

Built with metering pumps, tanks, portable mixers, and control panels, feed systems are fully piped, wired and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. Users also have option to use external bulk containers or totes. Feed systems can be configured for feed rates from 0.02 through...

Read More »
Wire Feeding Guns minimize friction in line.
Materials Feeders

Wire Feeding Guns minimize friction in line.

Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating...

Read More »
Wire Feeder is both rugged and portable.
Materials Feeders

Wire Feeder is both rugged and portable.

LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700...

Read More »
Chemical Feed Systems suit wide range of applications.
Materials Feeders

Chemical Feed Systems suit wide range of applications.

Custom systems can be designed to include any metering pumps, tanks, portable mixers and control panels, along with instruments and piping specialties. Units are fully piped, wired, and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. They offer feed rates from 0.02 to 300 gph at...

Read More »
Loose Pouch Feeder provides accurate inserting and counting.
Parts Feeders

Loose Pouch Feeder provides accurate inserting and counting.

Model OT handles loose bulk quantities of filled pouches of product, both counting and inserting pouches into containers at same time. It accommodates filled pouches in sizes from 1/4 x 1/2 in. to 4 x 6 in. Unit can be customized to feed from 1 to 20 lanes, with per lane feed rate up to 150/min. Model OT can be attached to cartoners, baggers, bucket conveyors, and tray thermoformers.

Read More »
Modular Infeed System places labels with accuracy to .005 in.
Parts Feeders

Modular Infeed System places labels with accuracy to .005 in.

Modular Infeed System can be added at infeed of existing folder gluers to feed, transport, and position carton blanks. It offers exact placement with infinitely variable pitch. Elimination of top carrier belts creates open design to scan entire blanks for bar codes, windows, or print defects. System includes computer sequenced carton feed (independent of belt speed), live side guide, and cammed...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics