Fans

Compact Cooling/Heating Fan produces uniform airflow.
Fans

Compact Cooling/Heating Fan produces uniform airflow.

Combining High-Volume/Low-Speed (HVLS) fan technology with compact design, Revolution® SP Fan circulates air volumes up to 50 ft from its center in all directions for optimal heating/cooling of areas encompassing 7,800 ftÂ-². Mounting heights range from 10-30 ft from finished floor to bottom of fan blade. Engineered with rotationally balanced blade/hub connection, 4-blade fan comes in...

Read More »
FRP Centrifugal Fans have corrosion resistant construction.
Fans

FRP Centrifugal Fans have corrosion resistant construction.

Made of single-width centrifugal blower with backward-curved wheel, model BCSW-FRP fans are available in both belt and direct drive configurations with performance capabilities up to 150,000 cfm and 14 in. w.g. They are suited for highly corrosive airstream applications such as wastewater treatment plants, pulp/paper processing, and metal finishing. Complying with ASTM D4167 and C582 standards,...

Read More »
Air Circulator allows fresh air streams in specific areas.
Fans

Air Circulator allows fresh air streams in specific areas.

Heavy-duty, fixed-head air circulator cooling fan creates air flow in specific areas of factory, plant, office, or laboratory where it would otherwise be difficult to direct fresh air. Operating on voltages of 1-phase 240 V or 3-phase 415 V, unit features motor power ranges from 0.20-0.30 kW and allows free air volumes to be moved at speeds from 3,000-17,000 Lps. Lightweight fan has 2 speeds and...

Read More »
Negative Air Fan suits asbestos and contaminant removal.
Air Filters

Negative Air Fan suits asbestos and contaminant removal.

Designed for applications where contaminated airborne particles must be removed to create clean/safe working environment, Negative Air Fan comes complete with safety dust load monitoring system. Unit is configured with HEPA filter and tested to AS 1324 to achieve min efficiency of 99.99%. Operating on 240 V, 10 A, and 3-pin plug electrical system, unit offers 2-stage alarm that notifies operator...

Read More »
Micro Sized Fan is rated for low power consumption at .175 W.
Fans

Micro Sized Fan is rated for low power consumption at .175 W.

Ultra-thin, micro-sized fan Super-Flow Micro delivers output of .57 cfm and comes with IP 57 water resistance rating. Designed to provide min 30,000 hr of life, fan is suited for various space-limited applications, including PDA, MID, smartphone, CCTV, GPS, mask and goggle, pocket projector, micro fuel cell, and air sensing usages.

Read More »
Compact, Motorized Axial Fans operate free from vibration.
Fans

Compact, Motorized Axial Fans operate free from vibration.

AMI precision-balanced fans, suited to limited-space applications, offer vibration-free operation thanks in part to coupling of motor and impeller, which are located directly in air stream. Impeller acts as rotating heat sink, and fan speed is completely controllable. Available in sizes from 170-300 mm and capacities from 300-1,700 cfm, fans are offered with standard or reverse flow...

Read More »
Fans

Tubeaxial 4.69 in. Fans provide high-speed operation.

Models 4100NH3 and 4100NH6, constructed with air intake over struts, handle dense system requirements, such in AdvancedTCA chassis. At free air (0 static pressure), 4114NH3 provides 182 cfm at 6,000 rpm, while 4114NH6 provides 259 cfm at 8,400 rpm. Model 4114NH6 also offers performance to 200 cfm at 1 in. of H2O. Both fans are offered in 12 (H3-H5), 24, and 48 Vdc variations.

Read More »
Tubeaxial Fan is available in 92 mm version.
Fans

Tubeaxial Fan is available in 92 mm version.

Model 3200JH3 Tubeaxial Fan operates at 135 cfm in free air and features fan blade with sickle shape and winglets. Equipped with intelligent electronics to achieve maximum efficiency, fan is offered in 24 and 48 Vdc variations and exhibits low noise operation even under high back pressures. Ball bearing cooling system extends service life.

Read More »
Belt-Driven, Tubeaxial Fan has performance-optimized design.
Fans

Belt-Driven, Tubeaxial Fan has performance-optimized design.

Built for aerodynamic efficiency performance, AIB Belt Drive Tubeaxial Fan delivers airflow capacities to 54,000 cfm and features heavy-duty welded steel housing and angle ring flanges. Other features include spark-resistant, cast aluminum airfoil axial impeller; factory set, adjustable pitch blades; and TEFC industrial-duty motor located outside of air stream. Offered in diameters from 12-60...

Read More »
Exhaust Systems

Met-Pro Corporation's Strobic Air Subsidiary Receives International Equipment Order Totaling Approximately $600,000

Harleysville, PA - Raymond J. De Hont, Chairman and Chief Executive Officer of Met-Pro Corporation (NYSE:MPR), announced today that the Company's Strobic Air subsidiary in Harleysville, Pennsylvania, received an order totaling approximately $600,000 from a nanotechnology laboratory in Western Europe. This order, which is for ten (10) Tri-Stack(TM) fans to be used for laboratory exhaust, is...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers