Fans

New BorgWarner Fans Offer Increased Efficiency for the Commercial Vehicle and Off-Highway Market

AUBURN HILLS, Mich., Sept. 5 /-- BorgWarner Thermal Systems has announced a new series of fans, the X Series, which offer better efficiency and enhanced performance for commercial vehicle and off-highway applications. By every measure of performance, we've raised the bar again with the introduction of the X Series fan, stated Carl Roberts, Director, Engineering at Thermal Systems. Our customers...

Read More »

Fans solve demanding thermal management issues.

Measuring 40 x 56 mm, Series AP4056 DC Ball Bearing Fans deliver up to 22.3 cfm of airflow with unregulated 12 V input. They draw 15 W of power maximum and operate with maximum noise level of less than 39 dB. Utilizing dual ball bearing technology, units gain more than 50,000 hr MTBF in typical 0-40-

Read More »

Hooded Roof Fans suit low pressure/low volume applications.

Intended for general commercial clean air ventilation, axial exhaust Model AE and axial supply Model AS are available in 7 sizes from 10-24 in. propeller diameters. Units offer capacities up to 6,000 cfm and up to 1.0 in. w.g. of static pressure. Both spun aluminum, direct-drive fans are AMCA certified for sound and air performance and UL listed.

Read More »

Roof Supply Fan provides non-tempered, filtered make-up air.

Featuring double width, forward curved centrifugal wheel, roof-mounted Model SAF is available in 5 sizes and can be specified from 725-14,000 cfm with up to 3.5 in. w.g. of static pressure. It features rubber in-shear true vibration isolation along with standard lifting lugs, galvanized steel housing, 1 in. washable aluminum filters, pre-drilled mounting holes, and NEMA-1 disconnect. Fan is AMCA...

Read More »

Waterproof Fans withstand harsh environmental applications.

Available in IP55 and IP21 rated units, RoHS-compliant Waterproof Fans meet or exceed IEC 60529 specifications for dust, moisture, and jet spray. Sizes range from 40 x 40 x 20 mm to 120 x 120 x 38 mm in dc models and from 80 x 80 x 25 mm square up to 171 x 51 mm round in ac models. DC units operate from nominal 12 V supply and deliver up to 115 cfm. Applications include outdoor security cameras,...

Read More »

Cooling Fan Motor has low-noise, energy-saving design.

Available in 12 V, G- and J-speed models, RoHS-compliant San Ace 40GV produces max airflow to 24 cfm while consuming 7.2 W power. It measures 1.57 x 1.57 x 1.1 in. and has L10 life expectancy of 40,000 hr @ 60-ºC. Impeller and frame design provide quiet operation. In addition to tachometer sensor and lock rotor sensor outputs, options include PWM control that permits fan's rotational speed to be...

Read More »

Air Moving Fan cools or warms facilities and workers.

Featuring 14 ft dia, Big EZ Fan runs at continuous speed, in forward or reverse, and needs no separate fan controller or complicated electrical work. Capable of moving 96,533 cfm of air at max speed of 73 rpm, product provides cooling comfort in summer and can be reversed in winter to bring warmer air down from ceiling. Design facilitates installation, operation, and maintenance in areas such as...

Read More »

Fan Series has intelligent thermal control capabilities.

Compatible with PWM controllers, RoHS-compliant Smart Fan series offers all-in-one intelligent operation with internal methods to control fan speeds according to ambient temperatures. Sensor technologies range from use of thermistors and Hall Effect sensors to chip-on-board thermal controller devices. Available in sizes from 40 x 40 x 15 mm to 120 x 120 x 38 mm, fans feature MagLev-® technology...

Read More »
Power Motor Fans cool servers and rack-mounted applications.

Power Motor Fans cool servers and rack-mounted applications.

Available in 140 configurations with frame thicknesses from 20-30 mm, Series PMD offers capacities from 38-120 mm-² with flow output from 10.6-190 cfm and static pressures from 0.15-1.73 in. H2O. Operating voltages include 12, 24, and 48 Vdc. All models comply with RoHS Pb-free materials and processes. Applications include 1U, 2U, 3U, 5U, and 5.5U servers, power supplies, workstations, telecom...

Read More »
Axial AC Fan has compact design.

Axial AC Fan has compact design.

Available in sizes from 60-92 mm with thicknesses from 2.25-3.38 mm, MagLev-® AC fan is offered in 4 speeds from 2,900-3,700 rpm with flow output from 39.54-53.71 cfm. It operates at noise levels from 31.6-33.7 dBA typ and is designed to work in temperatures to 70-ºC. Impeller design employs Vapo-bearing technology, and fans can be specified with terminals or lead wire. Fans are rated for...

Read More »

All Topics