Fans

Fans

AC and DC Axial Fans withstand harsh environments.

Available in sizes from 172–280 mm, HPLC Series is certified to IP56 and meets or exceeds international standard IEC 60529 for dust, moisture, and direct water exposure. FDA2 Series HPLC AC Fans are equipped with thermal protected external rotor capacitor-run induction motor, 2 ball bearing system, while FDD1 Series HPLC DC Fans feature IC protected brushless DC, 2 ball bearing system. Both are...

Read More »
YS Tech USA is Excited to Announce Their Improved 60mm Fan Models.
Fans

YS Tech USA is Excited to Announce Their Improved 60mm Fan Models.

YS Tech Designers and Engineers have managed to expand their NYW 60x25mm fan models performance by 35%! The new models take the upper RPM limit from 6800 to 10500 RPM. This was accomplished by completely redesigning the PCB, components, fan blade and motor internals. The previous top RPM was 6800 in the 48 volt model. Now with the upgraded motor design, the top RPM has been increased to 10500. Of...

Read More »
UDVL Upblast Roof Ventilator
Fans

UDVL Upblast Roof Ventilator

Continental Fan's UDVL Upblast Roof Ventilators provide aerodynamically efficient performance and a low silhouette design. These rugged, high quality ventilators are constructed with a heavy duty welded steel base, galvanized butterfly damper section and a spark resistant cast aluminum airfoil axial impeller.Â-  The UDVL direct drive low silhouette upblast roof ventilator requires no belts...

Read More »
Inline Mixed Flow Fan suits demand-based lab exhaust applications.
Exhaust Systems

Inline Mixed Flow Fan suits demand-based lab exhaust applications.

Available in belt or direct drive configurations with capacities from 1,500–38,000 cfm and up to 8 in. wg, Vektor®-MS utilizes mixed flow impeller technology and reduces fan energy in laboratory exhaust applications.Â- Sure-Aire™ noninvasive flow monitoring responds to changes in airflow and static pressure in occupied space, causing fan's operation to adjust based on demand, while...

Read More »
DC Axial Cooling Fans target OEM applications.
Fans

DC Axial Cooling Fans target OEM applications.

Designed for server, telecom, and medical applications, Model 04028DA measures 40 x 28Â- mm and offers 13.1–20.1 cfm range, while Model 06038DA measures 60 x 38 mm and delivers 50.5–66.4 cfm. Both feature single phase motor design with miniature ball bearings, allowing for high speed, low noise, and maximum efficiency in small package. Tach and PWM are available...

Read More »
PPV Fan Impaled for Safety
Fans

PPV Fan Impaled for Safety

Just-released video shows a firefighter next to a VENTRY® Fan when, at full RPM, the fan is stabbed with a pike pole! For 25 years, we have talked about how safe VENTRY Fans are, among their many benefits. This summer we released a video demonstrating this fact. As the engineer responsible for VENTRY Safety Propellers, our CEO James Neils stood beside our largest gas powered VENTRY Fan...

Read More »
DC Motors

Miniaturized Motors, Fans, Blowers suit compact devices.

Micro Motors, featuring brushless commutation technology, are designed for minimal power consumption and EMI. Delivering axial air-gap cooling, Micro Blowers serve such applications as portable medical devices, LED lighting, IP cameras, GPS devices, and solar and wind energy devices. Micro Fans and Coolers effectively manage heat generation forÂ- applications with limited space and...

Read More »
AID Axial In-Line Fan
Fans

AID Axial In-Line Fan

Where high efficiency and quiet operation are required, Continental Fan's AID Axial In-Line Fans offer the perfect solution. This innovative fan is available in diameters from 12 through 27", with capacities ranging to 11,400 CFM. Commonly used to move large volumes of air at medium and high pressures, AID Fans utilize ELTA adjustable pitch airfoil axial impellers to reduce noise and maximize...

Read More »
Electrical Enclosures

Filter Fans cool electrical and electronic enclosures.

Designed to remove unwanted heat from enclosures and cabinets, VFF SeriesÂ- provides forced convection cooling for computers, power distribution equipment, industrial automation controls, and food/beverage process controls. Fans draw filtered ambient air into cabinet while simultaneously blowing heated air out exhaust. Featuring injection molded, thermoplastic construction, fans...

Read More »
Fans

Computer Fans range in size from 80-140 mm.

Housed in streamlined package with light/dark grey color scheme, redux Series comprises both 4-pin PWM and 3-pin versions of Models NF-P14, NF-S12B, NF-B9, and NF-R8. Units come in 13 models with speeds ranging from 700–1,700 rpm.Â- Offering ruggedized 2,000 and 3,000 rpm versions of Models NF-F12 and NF-A14, industrialPPC Series combines 3-phase motor, fiberglass reinforced polyamide...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers