Small Arms IR Laser Pointers feature eye-safe output.
Military Target Systems

Small Arms IR Laser Pointers feature eye-safe output.

Manufactured from hardcoat anodized aluminum, DBAL-I2, EOLAD-1I, and ITAL-/OTAL-Classic are waterproof and meet MIL-STD-810G for adverse environmental conditions. Eye-Safe models are powered with FDA Class I, IR laser pointer for use with night vision equipment. DBAL-I2, Dual Beam Aiming Laser-Intelligent, is equipped with Class IIIa visible red or green laser pointer and Class I IR laser...

Read More »
CableOrganizer.com Gives Inside Tips on How to Prevent Accidents, Protect Sensitive Wiring and Rescue Your Décor with Cable Covers
Cable Protectors

CableOrganizer.com Gives Inside Tips on How to Prevent Accidents, Protect Sensitive Wiring and Rescue Your Décor with Cable Covers

Cord covers prevent trip-and-fall injuries and keep the emphasis on your décor - not the cables on your floor. Fort Lauderdale, FL, February 10, 2011 - Floor-level cords: they trip you when you're not looking, cost big bucks to replace after you've trampled them one time too many, and have a way of making even the most gorgeously decorated rooms look not quite "finished." Thankfully for the...

Read More »
Sensors / Detectors / Transducers

Goodrich Awarded U.S. Army Contract for Laser Warning Systems

CHARLOTTE, N.C. -- Goodrich Corporation (NYSE: GR) has been awarded a five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract by the U.S. Army for an anticipated maximum value of $47 million for the procurement of additional AN/AVR-2A(V) Laser Warning System components. The AN/AVR-2A(V) enhances aircraft survivability by detecting multiple laser aided threats and weapons systems....

Read More »
Explosives

Applied Resources Corporation Completes US Army Contract Supporting Lightweight Howitzer

Applied Resources Corp. (ARC) is proud to announce the successful completion of United States Army Contract W15QKN-09-C-0138 for various machine parts and assemblies in support of Lightweight 155mm Howitzer. Solicited (W15QKN-09-R-0264) and awarded by the Joint Munitions and Lethality Command Picatinny Arsenal, NJ, the base contract included twelve (12) different contract line item numbers...

Read More »
Controls and Controllers

Holo-Krome Division of Fastenal Buys AFC-Holcroft Mesh Belt System

Holo-Krome division of Fastenal has placed an order for an AFC-Holcroft mesh belt system, with a capacity of 2000 lb/hr. The equipment will be used for neutral hardening and carburizing of cap screws and set screws of various sizes. AFC-Holcroft will supply a new hardening furnace equipped with a burner management system and AFC-Holcroft's BeltMaster(TM) control system for CQI-9 compliance. The...

Read More »
Turrets

Elbit Systems' Brazilian Subsidiary, Aeroeletronica, Awarded a Framework Contract Valued at up to $260 Million to Supply 30mm Unmanned Turrets to the Brazilian Army

Elbit Systems' Unmanned Turrets, to be Produced in Brazil by Aeroeletronica, Will be Installed Onboard IVECO 6X6 Armored Personnel Carriers (APC) as a Part of the Guarani Project HAIFA, Israel - Elbit Systems Ltd. (NASDAQ and TASE:ESLT) ( Elbit Systems") announced that its Brazilian subsidiary, Aeroeletronica Ltda. ("AEL") was awarded a framework contract, valued at up to 440 million Brazilian...

Read More »
Military Target Systems

ATK Awarded $4.5 Million Contract for U.S. Air Force High-Speed Anti-Radiation Missile (HARM) Control Section Modification Program

ATK to Begin Limited Production Phase to Modify High-Speed Anti-Radiation Missile (AGM-88C) Control Sections Work on this program will be performed at ATK facilities in Woodland Hills, CA and Rocket Center, West VA MINNEAPOLIS -- ATK (NYSE: ATK) announced that it has been awarded a $4.5-million contract from the U.S. Air Force for the limited production phase of the High-Speed Anti-Radiation...

Read More »
Mechanical Hubs

Qosina Needle Hub Components

For customized OEM needle and hub designs Edgewood, NY - Needle hub components from Qosina make up a three part combination: hub connector, bushing and cap to create a customized fluid delivery or withdrawal system. The polycarbonate hubs are available in four different body styles (round, rectangular, octagonal and anatomic), each with a unique profile and finger grip. Stock sizes include 14,...

Read More »
Misumi Introduces More Fixed and Configurable Metric Metal Plates in Carbon Steel, Tool Steel, Aluminum Alloy and Titanium
Titanium

Misumi Introduces More Fixed and Configurable Metric Metal Plates in Carbon Steel, Tool Steel, Aluminum Alloy and Titanium

Several new lines of metal plates and an expansive selection of metal blocks and bars offer design engineers more choices than ever before. (Schaumburg, IL) - MISUMI USA, Inc., a subsidiary of MISUMI Corporation, part of MISUMI Group, Inc. (Tokyo: 9962) and a leading provider of fixed and configurable mechanical components for machine building and factory automation systems, has greatly expanded...

Read More »
Lasers

DARPA Awards Lockheed Martin $7 Million Contract to Produce Laser Enhanced Sniper Systems

AKRON, Ohio, Dec. 14, 2010 -- Lockheed Martin (NYSE: LMT) was awarded a $6.9 million contract by the Defense Advanced Research Projects Agency (DARPA) for multiple One Shot laser-based sniper systems that improve accuracy and reduce the possibility of detection. Existing sniper scopes cannot measure wind at long distances. One Shot utilizes a laser and camera to gauge wind speed and direction...

Read More »

All Topics