Presenting DYNICS EX and EW Product Series
Industrial / Specific Purpose Computers

Presenting DYNICS EX and EW Product Series

Presenting the DYNICS EX and EW products as our fanless monitor integrated PC built in a rugged enclosure NEMA 4, IP65 for industrial applications. The EX and EW are highly customizable, with SSD and HDD storage options, 5-Wire analog resistive touch screen capabilities and overhead or pedestal mounting options. The product can be 24VDC (4-Pin) or 120~240VAC (3-Pin) power entry, motherboard...

Read More »
Cabinet Helps Alleviate Temperature Concerns
Electrical Enclosures

Cabinet Helps Alleviate Temperature Concerns

The Heated Type 4X Polycarbonate Enclosure offers an excellent way to secure electronics outside and in exposed environments such as unheated warehouses, storage units, freezers, etc. The radiant heat plate prevents LCD displays from becoming sluggish or freezing. Designed to operate on 12, 16.5 or 24 volts. Includes three thermostats; a control thermostat, over temperature safety thermostat and...

Read More »
Cam Roller Carriages accommodate cam roller guide rails.
Roller Rails

Cam Roller Carriages accommodate cam roller guide rails.

GN 2424 aluminum or steel cam roller carriages for GN 2422 cam roller guide rails are available in metric sizes. Used in building roller guide systems, RoHS-compliant carriages are used in mechanical engineering or jigmaking for linear movement of plant equipment. Cam roller carriage, depending on type, allows mounted in axial or radial direction to roller axes. Similarly dependent, matching...

Read More »
Electrical Enclosures

NEMA-Rated Enclosures protect electronic equipment.

Molded from halogen-free, self-extinguishing, fiberglass reinforced polyester, NB20 Series withstands extreme temperature and corrosive environments. Enclosures feature fully gasketed lids and stainless steel quick-release latches with padlock hasps, protecting electrical and electronic equipment from water, wind, dust, and chemicals as well as theft and damage. Measuring 20 x 16 x 11 in., units...

Read More »
Electrical Enclosures

RF Shielded Box tests wireless device radio interfaces.

Able to be installed inÂ- 19 in. rack, R&S TS7124 provides reproducible measurement results in shielded (>80 dB at 6 GHz), 300 x 334 x 480 mm test environment free from interference and other unwanted emissions. Frequency range of 300 MHz to 6 GHz is suitable for wireless communications applications, and box can be equipped with antenna ring for placement of...

Read More »
VMP Features New 19-Inch Equipment Rack Enclosure at 2015 ISC East; Now Shipping
Electrical Enclosures

VMP Features New 19-Inch Equipment Rack Enclosure at 2015 ISC East; Now Shipping

The Latest and Largest in the Popular EREN Series Line, the 42 Rack Space EREN-42E1K Has a Usable Depth of 33 Inches and a Load Capacity of 1,300 lbs. STEVENSVILLE, Md. — Video Mount Products (videomount.com), a leading provider of mounting solutions for the security, commercial, residential, and pro audio/video markets, is proud to announce it will feature the recently launched 42 rack space...

Read More »
Plastic NEMA 4X Enclosures feature metric knockouts.
Electrical Enclosures

Plastic NEMA 4X Enclosures feature metric knockouts.

Manufactured from fiberglass-reinforced polycarbonate, SK Series is available in 12 sizes ranging from 2 x 2 in. to 14 x 10 in. Metric knockouts in base allow for entry of wiring, cables, or conduit onsite. Featuring IK08 impact rating, UL508 Type 4X and 12K listing, and IP66 rating, weather-resistant enclosures can withstand tough industrial environments. Accessories includeÂ- internal...

Read More »
Plastic Enclosures house wired or USB electronics.
Electrical Enclosures

Plastic Enclosures house wired or USB electronics.

Molded from ASA+PC-FR (UL 94 V-0) for UV resistance, CONNECT Enclosures feature 2-piece design with convex and flattened case shell sections. Flattened section is designed for fitting membrane keypad or product label. Measuring 2.13 x 0.87 in. with lengths of 2.99, 4.57, or 6.14 in., enclosures feature snap-together construction. Products are intended for electronics applications where unit is...

Read More »
Wash Down Duty Wall Mount Enclosures are made of stainless steel.
Enclosures

Wash Down Duty Wall Mount Enclosures are made of stainless steel.

Offered in 18 sizes from 16 x 12 x 8 in. to 60 x 36 x 16 in. in 304 and 316 material, Waterfall Series is approved to NSF/ANSI 169Â- as well as UL and CSA certified to NEMA 3R, 4, 4X, and 12 (IEC60529 IP66). Smooth No. 4 finish facilitates cleaning, while top and door top slope at 25° to promote water run-off as well as prevent clutter from being placed atop unit. Cleaning is...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics