Electronic Converters

Electronic Converters

Direct RF-Sampling ADCs support input frequencies to 2.7 GHz.

Consisting of five 12-bit ADCs, ADC12Dxx00RF Series enables system designers to eliminate multiple IF down-conversion stages, including amplifiers, mixers, and filters. Units directly sample RF signals beyond 2.7 GHz, with third-order intermodulation distortion up to -71 dBc and sampling at up to 3.6 GS/s. Single device replaces entire radio signal path subsystems in 3G/4G wireless basestations...

Read More »
Electronic Converters

ComNet Adds New North American Strategic Partner

Code Blue Chooses ComNet to Provide Media Interface Products for their Emergency Call Boxes. Danbury, CT. - Communication Networks of Danbury, Connecticut, known as ComNet, a leading manufacturer of fiber optic transmission and networking equipment, has been approved by Code Blue of Holland, MI to supply fiber optic media converters and EoVDSL modems (Ethernet over Very High Digital Subscriber...

Read More »
ADC/DAC Module offers 16-bit data acquisition at 250 MHz.
Electronic Converters

ADC/DAC Module offers 16-bit data acquisition at 250 MHz.

Featuring Xilinx® Virtex(TM)-6 LX240T FPGA processor, Model ICS-1572A acts as link between analog sensors and digital computing. Transceiver XMC board provides two 16-bit ADCs sampling synchronously at frequencies up to 250 MHz and two 16-bit DACs at up to 500 MHz. To allow for under-sampling applications, ADC input pass band is 4.5-800 MHz. Module is suitable for deployment in radar,...

Read More »
Media Converter turns Ethernet signal via CAT5 to optical fiber.
Electronic Converters

Media Converter turns Ethernet signal via CAT5 to optical fiber.

Primarily used for Gigabit Ethernet device links in backbone network transmission, 10/100/1000M media converter operates at 1000 Mbps over optical and electric channels. It supports single- and multi-mode fibers with respective transmission distances to 80 and 550 m and also extends transmission distance through its photoelectric conversion network. Available network connections include...

Read More »
Electronic Converters

NI Expands FPGA-Enabled NI FlexRIO Family for PXI with Six New I/O Modules

New Offering Includes Industry's Fastest 16-Bit Converter From Analog Devices AUSTIN, Texas - National Instruments (Nasdaq: NATI) today introduced the expansion of its NI FlexRIO product line with six new adapter modules featuring FPGA-based reconfigurable I/O to deliver enhanced functionality for general-purpose automated test and high-speed digital communication. The NI FlexRIO family is the...

Read More »
Electronic Converters

High-speed Data Converters and IF Diversity Receivers from Analog Devices Maximize Receiver Sensitivity and Dynamic Range for 3G and 4G Cellular Base Stations

NORWOOD, Mass. - Analog Devices Inc. (ADI) today introduced four high-speed data converter products that support signal sampling rates necessary to accommodate multi-carrier radio platform requirements for today's 3G and 4G cellular infrastructure communication standards, including CDMA2000, UMTS/LTE, TD-SCDMA and TD-LTE. Analog Devices' AD6649 and AD6643 IF diversity receivers and AD9643 and...

Read More »
Conversion Panels convert single-phase input into 3-phase output.
Electronic Converters

Conversion Panels convert single-phase input into 3-phase output.

Utilizing VFD technology, Phase Conversion Panels convert 230 V single phase incoming power into 230 V 3-phase output power for 2-10 hp pumping applications. Each panel features inner door design with flashing alarm light, audible alarm with alarm silence PB, pump and control circuit breakers, and motor starters with adjustable overloads. Housed in NEMA 4X fiberglass powder-coated enclosure with...

Read More »
Fiber Optic Media Converter integrates PoE capability.
Electronic Converters

Fiber Optic Media Converter integrates PoE capability.

As 1000FX fiber optic media converter, CNGE2MCPOE provides PoE function for compatible peripheral devices. It supports IEEE 802.3at PoE standard for use for as Power Sourcing Equipment (PSE), supplying up to 25 W of power. Designed for use in harsh environments, product allows 10/100/1000TX Ethernet data to be transmitted optically over either multimode or single-mode optical fiber by...

Read More »
Electronic Converters

Quad-Channel ADC suits medical imaging equipment.

Offered in non-magnetic package option for use in strong magnetic field, ADS5263 meets medical imaging device designers' needs for clear, crisp signals and accelerated acquisition times by delivering SNR of 84.6 dBFS with 10 MHz input and sampling frequency up to 100 MS/sec. ADC comes standard in 9 x 9 mm QFN package and respectively consumes 195 and 380 mW/channel in 14- and 16-bit resolution...

Read More »
Electronic Converters

PCIe High-Speed Digitizer enhances OEM design options.

Series U1084A combines ADCs with on-board FPGA technology, allowing OEMs to design-in high-speed signal acquisition and analysis. Base version, U1084A-001, features sampling rates to 4 GSps and full-featured front end with 1.5 GHz bandwidth. Other versions, U1084A-002 and -003, respectively offer sampling rates to 2 and 1 GSps. All versions are dual-channel and have interleaved single-channel...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics