Pentek Announces New Family of PCI Express Boards
Share:
o Routing Flexibility Designed Specifically for Communications, Software Radio, Radar, Telemetry and Signal Intelligence Applications
o Gen 2 PCI Express x16 Interface
o Latest PC and Blade Server Compatibility
o Direct FPGA Connectivity and IP Development Tools
UPPER SADDLE RIVER, NJ, January 27, 2009-The 7700 is the latest family of Pentek software defined radio products and the first to feature the PCI Express (PCIe) form factor with advanced connectivity options. Pentek's new family is comprised of five products: the Models 7741, 7742, 7750, 7751 and 7752. Each offers a unique set of software radio features in a full-length PCI Express (PCIe) board with the very latest Gen 2 PCIe x16 interface. This emerging standard for high-end PCs, blade servers and enterprise computers delivers fast interconnect links for economical, high-performance system solutions.
"Pentek's new PCIe product line leverages this technology for our most popular designs," said Rodger Hosking, vice president of Pentek, "By using numerous gigabit serial links, our design engineers have boosted effective data throughput between modules and the motherboard to minimize bottlenecks. In addition, our customers gain new options for FPGA connectivity and system topology. These high-density, PCIe solutions specifically target software radio, radar, telemetry and signal intelligence applications."
Full Length PCI Express Boards
Since the 7700 family offers full-length PCIe boards, they incorporate up to two PMC/XMC modules, all within a single PCIe envelope. This doubles the channel count of earlier models and delivers a lot of performance in a very small volume. Customers can utilize the PCIe interface for motherboard connections and XMC interfaces for gigabit links between modules and other boards. This flexibility allows users to build high-speed multi-board PC systems at relatively low cost.
"The 7700 boards excel in connectivity options and Pentek's unique design now brings powerful Xilinx FPGA platforms to the PC arena," said Tom Feist, ISE Design Suite senior marketing director at Xilinx. "PCIe, PCI-X and XMC interfaces connect to on-board Xilinx FPGAs streamlining data flow directly across these links. By choosing from many available IP core interfaces, these products can be tailored to meet specific protocols, including Aurora, the streaming link-layer protocol from Xilinx."
Specifics for the Five 7700 Series Boards
Each of the five software radio boards offers specific resources including channel count, bandwidth, FPGA population and more. This allows customers to choose exactly what they need for very cost-effective, high-density solutions.
The Model 7741 includes up to four 125 MHz, 14-bit A/Ds and four 500 MHz 16-bit D/As. It features one or two TI/Graychip GC4016 quad digital down converters with output bandwidths up to 10 MHz, and one or two digital up converters that accept baseband real or complex data streams with signal bandwidths up to 40 MHz. One or two Xilinx XC2VP50 Virtex-II Pro FPGAs serve as control and status engines with data and programming interfaces to each of the on-board resources, including the A/D converters, digital down converters, digital up converters and D/A converters.
The Model 7742 includes up to eight 125 MHz, 14-bit A/Ds, two up converters and two 500 MHz 16-bit D/As. The 7742 architecture also includes up to four Virtex-4 FPGAs.
The Model 7750 includes up to eight 200 MHz, 16-bit A/Ds, up to 3 MB of SDRAM, and up to four Virtex-5 FPGAs.
The Model 7751 is a 512-channel digital downconverter with up to eight 200 MHz A/Ds and up to four Virtex-5 FPGAs. This represents a tremendous amount of processing power in a single PCIe slot. It features independent tuning for each DDC channel and decimation from 128 to 1024 in steps of 64.
Finally, the Model 7752 is a 64-channel downconverter with up to eight 200 MHz, 16-bit A/Ds and up to four Virtex-5 FPGAs. Each group of four A/Ds is supported by a high-performance 32-channel digital downconverter. DDC decimation ranges from 16 to 8192 in steps of 8.
Auxiliary Power Connector
Another feature common to all the boards in the Pentek 7700 family is the 4-pin disk drive power connector to ensure that the boards receive ample power from the host computer or server. This augments the power supplied through the PCIe backplane connector.
Firmware and Software Support
The Models 7741, 7742 and 7750 have user-configurable FPGAs and Pentek supports ustomers with the GateFlow Design Kits. Because the Model 7751 and 7752 have reinstalled FPGA digital downconverter IP cores, they do not require user programmability.
Price and Availability
Pricing for boards in Pentek's 7700 series begins at $13,490; delivery is 8 to 10 weeks ARO. ReadyFlow board support packages for Linux and Windows are available for all boards.
About Pentek
Pentek, Inc. manufactures and markets innovative embedded systems and boards to design engineers and is a certified ISO 9001:2000 quality management company. Pentek offers powerful VME, VXS, PMC, XMC, cPCI, PCI and PCIe boards and systems for data acquisition, software radio and digital signal processing featuring Texas Instruments DSPs, Freescale PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital transceivers, installed IP cores and more. The company offers strong DSP software support and equips all products with high-performance I/O including gigabit serial interfaces.
Pentek, ReadyFlow and GateFlow are registered trademarks of Pentek, Inc. Other brand or product names are registered trademarks or trademarks of their respective holders.
For the release, photograph and datasheet, please visit: www.pentek.com/whatsnew/ViewRelease.cfm?Index=114
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com. Website www.pentek.com.
International Sales Contacts: Elexo in France 0141 22 1023, Sela Electronic Systems in Israel at 36479969, MISH International in Japan at 425387650, Beijing BetaOne Sysjob Ltd. in China at 1082784106 and Acetronix Co. Ltd. in Korea at 24202343, ext. 106, Aries Ingenieria Y Sistemas, S.A.
in Spain at 91 570 2737. Please visit www.pentek.com/contact/replist.pdf for a full list of international Pentek representatives and distributors.
