Logic Gate Optocoupler suits high-speed applications.
Providing 5 kVrms isolation voltage over its power supply voltage range, FOD2200 allows designers to drive data buses directly and eliminates possibilities for output signal chatter. Low IF of 1.6 mA (min) and VCC range of 4.5-20 V make unit compatible with TTL, LSTTL, and CMOS logic. Housed in DIP-8 package, product features common mode rejection of 1 kV/5 s, 3-state output, hysteresis output,...
Read More »
Optocouplers are rated for 100-
Single- and Dual-Channel, 10 MBd Optocouplers combine input LED with integrated optical photodiode IC detector for applications requiring high data rates. They feature CMR values up to 10,000 V/Ã-µs, typical PWD of 2.9 ns, and typical propagation delay of 50 ns. Available in DIP-8 package with choice of 2 surface-mount options and one 400-mil-wide lead form through-hole configuration,...
Read More »
Optical Isolator offers AC/DC voltage isolation up to 16 kV.
Consisting of infrared LED and photologic sensor, Model OPI1268 is capable of DC and AC voltage isolation between input and output circuitry while providing TTL signal integrity. Maximum isolation voltage is 16 kV with propagation delays less than 200 ns. Isolator is packaged in opaque plastic housing with transmissive internal light pipe between LED and photologic sensor. High level output...
Read More »
Transistor Optocouplers offer minimum 5 kV/-µs CMR.
Combining coplanar technology with shielding of silicon detector chip, 3.3 and 5 V Series FODX5XL optocouplers deliver 1 Mbits/s bandwidth. Units are suited for feedback isolation in switch mode power supplies and for power transistor isolation in motor drives. They are available with single or dual channels and in SOIC-8 or DIP-8 packages.
Read More »
Things to Consider Before Designing Custom Packaging
This e-Book provides pre-design process considerations for custom corrugated packaging.
Read More »
Surface Mount Optocoupler is offered in BGA package.
Model FODB100 Microcoupler(TM) consists of aluminum gallium arsenide IR LED driving silicon phototransistor. Single-channel optocoupler with transistor output is housed in 3.5 x 3.5 mm Ball Grid Array package with 1.20 mm max mounted height. Lead-free product operates over -40 to +125Ã-
Read More »
Optocouplers are rated for temperatures to 110-
Housed in plastic packaging, optocouplers have operating temperature range of -55 to +110Ã-
Read More »
Triac-Driver Optocouplers come in compact MFP packaging.
Offered in 4-pin, mini-flat packages (MFP), random-phase optocouplers consist of IR LED, optically coupled to silicon bilateral switch. They allow power triac to be triggered at any point on ac voltage waveform and offer peak blocking voltages of 250, 400, and 600 V. Available with trigger current options of 5, 10, and 15 mA, units have steady-state isolation voltage of 3,750 Vrms; full pitch,...
Read More »
Split Darlington Optocouplers operate at 3.3 and 5 V.
Dual-channel HCPL0730 and HCPL0731 offer 5 V operation and SOIC-8 packaging, while single-channel FOD070L and FOD270L, and dual-channel FOD073L, operate at 3.3 V. Split darlington output configuration separates input photodiode and first stage gain from output transistor to permit output saturation voltage of 0.1 V. Units offer 0.5 mA input current, 1800% typical current transfer ratio, and 5 KV...
Read More »
Optocoupler offers input-to-output distance of >3 mm.
High-Voltage Model CNY65Exi meets ATEX standard for operation in potentially explosive atmospheres. It consists of phototransistor optically coupled to GaAs infrared-emitting diode in 4-lead, plastic package. Suited for J coupling system, plastic package measures 17.8 x 9.6 x 6.1 mm with pin index of 15.24 mm. Current transfer ratio range is 50-300%, and isolation test voltage is 11.6 kV....
Read More »
Signal Isolator/Splitter offers full optical isolation.
IsoSplitter(TM) 4393 dc/dc transmitter accepts one dc voltage or current input and provides 2 optically isolated dc voltage or current outputs. Input and output ranges can be independently configured to requirements. Unit includes LoopTrackerÃ-® LEDs for input/output monitoring and functional-test button for testing output, independent of input signal. It is suitable for systems with multiple...
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
