New Electric Wire, Cable and Cable Assemblies Products

Molded Cordsets are NEMA rated.

Interpower(TM) Molded Cordsets are for equipment rated up to 20 A with service at 250 Vac. They are configured with NEMA 6-20 plug, and are terminated with straight, left, or right angled IEC 60320 C19 connectors. Cordsets are available with 2.5 m of 3 x 12 AWG, SJT cable. They are UL listed and CSA certified.

Flat Magnet Wire includes sizes from 30 to 9 AWG.

Flat Magnet Wire is produced from round pre-insulated magnet wire that is flattened between mirror polished work surfaces. Insulation is stressed in only one direction, and resistance and wire gauge remain largely unchanged. Wire comes in 10 or 20 lb spools and 5 ratios of thickness to width. User can select cross sectional area in sq mm or sq mil, or in terms of wire resistance. Insulation is...

Cable Assemblies are manufactured to customer requirements.

Electrical and microwave telecommunication cable assemblies are custom manufactured using RF connectors and coax/triax cables to meet specific design requirements. Featuring potted and encapsulated connectors, strain-relief boots, and other special related materials, UL/CSA approved assemblies can be built to withstand extreme conditions. For military use, they can be hand soldered and certified...

Microwave Cables offer resistance to extreme temperatures.

Metal-jacketed Microwave Cables use high purity silicon dioxide, which resists temperatures in excess of 900Ã-

Lanyards & Lanyard Assemblies - Attach and Secure Your Components

To learn more about the different types of lanyard options available or which to select for your specific application, download our product guide.

Shielded Cable increases signal isolation.

GUARDmark-6 Foil Twisted Pair (FTP) design increases signal isolation, preventing contaminant noise from entering cabling systems and disrupting network performance. Product has ETL verification to ANSI TIA-EIA 568-B.2-1 Category 6 standard and includes Premium Category 5e and standard Category 5e cables, all verified by ITS ETL SEMKO.

Flexible Control Cables suit confined areas.

L-FLEXX 290 Cables snake through tight curves during installation. Finely stranded bare copper conductors, combined with talc lubricant dispersed between conductors, allow for tight bend radius. Rated for 600 V/90Ã-

Molded Cordsets incorporate NEMA plug.

UL-listed, CSA-certified Interpower(TM) NEMA 5-20P cordsets are suited for equipment rated up to 20 A with service at 125 Vac. Available with 2.5 m of 3 x 12 AWG, SJT cable, products are configured with NEMA 5-20 plug and are terminated with 3 different (left, right, and straight) angled IEC 60320 C19 connectors, allowing designers to reduce clearance space required behind or under equipment....

Copper Cable Assemblies suit high-speed data applications.

Assemblies are available in 4- and 12-channel, bi-directional versions, utilizing 24 or 26 AWG cable. They minimize skew, crosstalk, and EMI, resulting in near end crosstalk of less than 4% at 3.187 Gbps. Offered in lengths from 0.5-5 m, differential cables handle high-bandwidth environments, such as InfiniBand(TM), 10G Fiber Channel, 10G Ethernet (CX4), and other applications that require speeds...

Cordsets have stainless steel coupling nuts.

Picofast Cordsets, with 316 stainless steel coupling nuts, withstand wash-down environments and are suitable for food industry applications, or any place caustic materials are used. Hex design, with no knurling, allows easy cleaning. Units are rated to IP 68 and can withstand 1200 psi applications with water, detergents, and surfactants. They have M8 thread and will mate with any quick-disconnect...

USB-to-Serial Cable suits laptop PCs without serial ports.

Model US232B/LC cable-and-software solution provides USB connectivity to RS-232 devices. It is based on single chip FT232BM USB UART for transferring serial data over Universal Serial Bus. Cable features full set of RS-232 modem data and control signals on PC compatible DB9 male connector. It includes internal 128 byte transmit buffer FIFO, 384 byte receive buffer FIFO, and supports RS232 data...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.